MAX3232IPWRE4 - Dual RS-232 Transceiver | Texas Instruments
部品番号: MAX3232IPWRE4 ✓ 生産中MAX3232IPWRE4 概要
An RS-232 transceiver is an interface IC that bridges a low-voltage digital logic system and the voltage levels used by RS-232 serial equipment. The MAX3232 combines bipolar line-driver outputs, receiver inputs, and charge-pump-assisted level shifting in one package. This integration allows a modern microcontroller or processor with TTL or CMOS-compatible logic to communicate with legacy RS-232 peripherals over a multi-drop or point-to-point serial link.
Principal features include two transmit channels, two receive channels, operation from a 3 V to 5.5 V VCC supply, and a maximum data rate of 250 kbit/s. The MAX3232 accepts 5 V logic, requires external 0.1 µF charge-pump capacitors, and has a typical low supply current of 300 µA. The industrial-temperature ordering option supports operation from −40 °C to 85 °C while maintaining a surface-mount footprint suitable for compact embedded equipment.
The integrated dual charge pump generates the positive and negative voltage levels needed by RS-232 transmitters. Although the interface-side supply is only 3 V to 5.5 V, the driver outputs use the charge-pump voltage rails to provide RS-232-compatible signaling. The receiver section converts the bipolar RS-232 input levels into logic-compatible signals, allowing the same device to support complete host-to-peripheral serial links when both driver and receiver channels are used.
Typical applications include industrial serial-port controllers, point-of-sale terminals, test and measurement equipment, data-acquisition systems, and embedded control boards that require an RS-232 connection. The 250 kbit/s capability is suitable for legacy serial protocols, while the integrated ±15 kV ESD protection helps improve robustness when cables connect the board to external equipment.
The charge-pump capacitors must be placed close to their associated pins, and the logic and serial interfaces should be routed to reduce noise coupling. Check the device’s supply, logic-level, temperature, and ESD requirements before production release, especially when replacing an RS-232 component with different channel counts or a different package.
This product page consolidates the MAX3232IPWRE4 interface specifications, package information, practical RS-232 design guidance, and verified replacement considerations. It is intended to help engineers evaluate the part quickly while preserving the distinction between electrical compatibility, package compatibility, and application-specific design requirements.
ドロップイン代替品: MAX3232IPWRE4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3232IPWRE4 (同一形状・フットプリント) — 相違点: Package, ESD Protection, External Capacitors, Function, Protocol Compliance.
MAX3232EIPWG4
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3232CPWRE4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →TRS3232EIRGT
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3232IPWRE4 仕様
| Product Type | Multichannel RS-232 line driver/receiver |
| Driver Channel Count | 2 channels |
| Receiver Channel Count | 2 channels |
| Transceiver Configuration | 2/2 full RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s |
| ESD Protection | ±15 kV |
| 電源電流 | 300 µA typical |
| External Charge-Pump Capacitor | 0.1 µF |
| Logic Input Compatibility | 5 V logic |
| RS-232 Standard | TIA/EIA-232-F |
| ITU Standard | ITU V.28 |
| パッケージ | 16-TSSOP |
| Package Width | 4.40 mm |
| 動作温度範囲 | −40 °C to 85 °C |
| 実装タイプ | Surface mount |
MAX3232IPWRE4 4.40 mm ピン配置ガイド
MAX3232IPWRE4 (4.40 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3232IPWRE4.
詳細は データシート をご参照ください。
主な用途
MAX3232IPWRE4 の用途: 6 件s: Point-of-Sale Terminal Serial Interface, Industrial Serial Control Panel, Test and Measurement Equipment, Data Acquisition Controller, Embedded Serial Adapter, Legacy Peripheral Connectivity.
Point-of-Sale Terminal Serial Interface
The MAX3232IPWRE4 is suitable for a point-of-sale terminal that must connect a modern controller to an RS-232 receipt printer, scanner, or display. Its two drivers and two receivers provide a complete bidirectional interface in one 16-TSSOP package, while the 250 kbit/s rate supports conventional legacy peripheral protocols. The 3 V to 5.5 V VCC range accommodates embedded 3.3 V and 5 V supply plans. The industrial −40 °C to 85 °C rating is useful in terminals deployed beyond controlled office environments. Designers should confirm logic thresholds, use the specified 0.1 µF charge-pump capacitors, and protect the externally accessible serial connector with suitable cable and ESD arrangements.
おすすめ
Industrial Serial Control Panel
The MAX3232IPWRE4 fits an industrial control panel that connects a PLC, data logger, or service computer through an RS-232 port. The 250 kbit/s maximum data rate is adequate for many supervisory protocols, while two driver and two receiver channels support full-duplex or multi-peripheral arrangements. Its industrial temperature range of −40 °C to 85 °C helps address temperature variation inside cabinets and production equipment. The integrated dual charge pump reduces the external component count required for bipolar RS-232 signaling. Keep the 0.1 µF charge-pump capacitors close to the IC, provide a low-impedance ground return, and route the serial side away from fast-switching circuitry to minimize coupling into the panel’s control electronics.
おすすめ
Test and Measurement Equipment
MAX3232IPWRE4 can provide an RS-232 command and control connection in laboratory instruments, bench testers, and automated test systems. Its two transmitters and two receivers allow instrument-control software to exchange commands and receive measurements over separate serial channels. The 250 kbit/s operating capability aligns with many legacy instrument protocols, while the 3 V to 5.5 V supply range supports mixed-instrument logic architectures. The −40 °C to 85 °C operating range is beneficial for equipment used in variable ambient conditions. Confirm the instrument’s RS-232 level timing, handshake arrangement, and connector wiring before production. Maintain short ground returns and consider galvanic isolation when the connected equipment may develop ground-potential differences.
おすすめ
Data Acquisition Controller
The MAX3232IPWRE4 is appropriate for a compact data-acquisition controller that must communicate with a legacy measurement instrument or service computer. A single 16-TSSOP device provides two transmit paths and two receive paths, simplifying channel allocation for configuration commands and returned records. The 250 kbit/s limit supports many moderate-speed acquisition-control protocols, although the software must respect the slower RS-232 rate. The device’s low 300 µA typical supply current is beneficial in compact controller designs with limited thermal budgets. Use the datasheet’s charge-pump capacitor arrangement and pinout, isolate analog and digital grounds according to the system architecture, and apply filtering or isolation if the RS-232 cable introduces external noise or ground offsets.
おすすめ
Embedded Serial Adapter
The MAX3232IPWRE4 can serve as the RS-232 conversion stage in an embedded USB-to-serial, Ethernet-to-serial, or processor-based communication adapter. The host logic operates at a compatible low-voltage level, while the transceiver supplies the bipolar voltage signaling required by an RS-232 port. Two drivers and two receivers support bidirectional command and status traffic, and the 250 kbit/s rate fits many legacy peripherals. The surface-mount 16-TSSOP package supports compact adapter boards, while the industrial temperature range allows deployment in equipment cabinets. Validate the host UART logic levels, respect the specified charge-pump capacitor values, and include protection appropriate to the connector’s exposure and cable length.
おすすめ
Legacy Peripheral Connectivity
The MAX3232IPWRE4 enables a modern controller to retain compatibility with RS-232 printers, scales, programmers, and service equipment. Its 2/2 transceiver arrangement provides enough channels for typical host-to-peripheral communication, and the 250 kbit/s rate covers many legacy control protocols. Operation from 3 V to 5.5 V allows the interface to share a supply with either 3.3 V or 5 V embedded logic, subject to the logic-level requirements. The ±15 kV ESD protection on the serial connection pins improves robustness at externally accessible ports. Confirm the peripheral’s pinout, handshake signals, and connector gender, and use a common reference ground or an isolation strategy when the two connected systems can sit at different ground potentials.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3232IPWRE4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3232E | MAX3232CPWRE4 | TRS3232E |
|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Transceiver Configuration | 2/2 full RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | 250 kbit/s | 250 kbit/s | 250 kbit/s |
| ESD Protection | ±15 kV pin-to-pin | ±15 kV family-level protection | ±15 kV family-level protection | ±15 kV family-level protection |
| Supply Current | 300 µA typical | 300 µA typical family value | 300 µA typical family value | 300 µA typical family value |
| External Charge-Pump Capacitor | 0.1 µF | 0.1 µF family value | 0.1 µF family value | 0.1 µF family value |
| Operating Temperature Range | −40 °C to 85 °C | Confirm exact ordering suffix | −40 °C to 85 °C family indication | Confirm exact ordering suffix |
主な差別化要因
- Complete dual-channel RS-232 interface in one package (vs MAX3232E)
- Pin-to-pin ESD protection on serial-port connections (vs TRS3232E)
- Established 16-TSSOP integration (vs MAX3232CPWRE4)
設計ノート
Place the two specified 0.1 µF charge-pump capacitors adjacent to their MAX3232IPWRE4 pins and connect them according to the manufacturer datasheet’s typical application diagram. Keep their return paths short and avoid routing the charge-pump node beneath sensitive analog or high-speed digital traces. The capacitors generate the bipolar RS-232 voltage levels, so long or high-impedance connections can increase ringing and reduce interface reliability.
Separate the logic-side nets from the RS-232 connector side as far as the package and board area allow. Provide a direct, low-impedance ground return between the transceiver and connector shield or chassis reference, and route driver outputs away from receiver inputs where the board outline allows. These steps reduce susceptibility to cable-borne transients and prevent transmitted edge noise from coupling into received data.
Do not treat a family name such as MAX3232E or TRS3232E as a drop-in substitute without checking the complete ordering code. Confirm the 16-TSSOP footprint, pin numbering, temperature grade, supply range, charge-pump connections, and transceiver channel arrangement. In particular, changing the number of drivers or receivers can invalidate a PCB even when the package name is unchanged.
コンプライアンス情報
The accessible product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this industrial interface IC.