Texas Instruments

MAX3232IPWRE4 - Dual RS-232 Transceiver | Texas Instruments

MPN: MAX3232IPWRE4 ✓ פעיל
3 V to 5.5 V Vdss 300 µA typical Id 16-TSSOP Package
כמות הזמנה מינימלית: 1 |

MAX3232IPWRE4 סקירה

Texas Instruments MAX3232IPWRE4 is a dual-channel RS-232 line-driver and line-receiver transceiver operating from a 3 V to 5.5 V supply, supporting data rates up to 250 kbit/s in a 16-pin TSSOP package. The device integrates two drivers, two receivers, a dual charge-pump circuit, and pin-to-pin ±15 kV ESD protection on the serial-port connection pins.

An RS-232 transceiver is an interface IC that bridges a low-voltage digital logic system and the voltage levels used by RS-232 serial equipment. The MAX3232 combines bipolar line-driver outputs, receiver inputs, and charge-pump-assisted level shifting in one package. This integration allows a modern microcontroller or processor with TTL or CMOS-compatible logic to communicate with legacy RS-232 peripherals over a multi-drop or point-to-point serial link.

Principal features include two transmit channels, two receive channels, operation from a 3 V to 5.5 V VCC supply, and a maximum data rate of 250 kbit/s. The MAX3232 accepts 5 V logic, requires external 0.1 µF charge-pump capacitors, and has a typical low supply current of 300 µA. The industrial-temperature ordering option supports operation from −40 °C to 85 °C while maintaining a surface-mount footprint suitable for compact embedded equipment.

The integrated dual charge pump generates the positive and negative voltage levels needed by RS-232 transmitters. Although the interface-side supply is only 3 V to 5.5 V, the driver outputs use the charge-pump voltage rails to provide RS-232-compatible signaling. The receiver section converts the bipolar RS-232 input levels into logic-compatible signals, allowing the same device to support complete host-to-peripheral serial links when both driver and receiver channels are used.

Typical applications include industrial serial-port controllers, point-of-sale terminals, test and measurement equipment, data-acquisition systems, and embedded control boards that require an RS-232 connection. The 250 kbit/s capability is suitable for legacy serial protocols, while the integrated ±15 kV ESD protection helps improve robustness when cables connect the board to external equipment.

The charge-pump capacitors must be placed close to their associated pins, and the logic and serial interfaces should be routed to reduce noise coupling. Check the device’s supply, logic-level, temperature, and ESD requirements before production release, especially when replacing an RS-232 component with different channel counts or a different package.

This product page consolidates the MAX3232IPWRE4 interface specifications, package information, practical RS-232 design guidance, and verified replacement considerations. It is intended to help engineers evaluate the part quickly while preserving the distinction between electrical compatibility, package compatibility, and application-specific design requirements.

חלופות תחליף ישיר עבור MAX3232IPWRE4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3232IPWRE4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, ESD Protection, External Capacitors, Function, Protocol Compliance.

Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
External Capacitors: 4 x 0.1 uF charge pump
Function: RS-232 Line Driver/Receiver
השווה עם MAX3232IPWRE4 →
Texas Instruments
Package: 16-pin VQFN (RGT), 3x3 mm
ESD Protection: ±15 kV IEC ESD (bus pins, pin to pin including GND)
External Capacitors: 4 x charge pump + 2 x bypass (0.1 uF typical)
השווה עם MAX3232IPWRE4 →

MAX3232EIPWG4

✅ Drop-In
Texas Instruments
📦 16-TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232CPWRE4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 16-TSSOP
Dual RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV · 2 drivers and 2 receivers · 16-pin TSSOP · 16 · Gull wing

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TRS3232EIRGT

✅ Drop-In
Texas Instruments
📦 16-TSSOP
RS-232 Line Driver and Receiver (Transceiver) · 2 · 2 · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD (bus pins, pin to pin including GND) · TIA/EIA-232-F · 16-pin VQFN (RGT), 3x3 mm

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232IPWRE4 מפרטים

Product Type Multichannel RS-232 line driver/receiver
Driver Channel Count 2 channels
Receiver Channel Count 2 channels
Transceiver Configuration 2/2 full RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
ESD Protection ±15 kV
זרם אספקה 300 µA typical
External Charge-Pump Capacitor 0.1 µF
Logic Input Compatibility 5 V logic
RS-232 Standard TIA/EIA-232-F
ITU Standard ITU V.28
מארז 16-TSSOP
Package Width 4.40 mm
טווח טמפרטורת פעולה −40 °C to 85 °C
סוג הרכבה Surface mount

מדריך תצורת פינים של MAX3232IPWRE4 4.40 mm

תצורת פינים עבור MAX3232IPWRE4 (מארזת 4.40 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 4.40 mm עבור MAX3232IPWRE4

אין נתוני פריסת פינים מפורטים עבור MAX3232IPWRE4.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX3232IPWRE4 מתאים עבור 6 יישוםs: Point-of-Sale Terminal Serial Interface, Industrial Serial Control Panel, Test and Measurement Equipment, Data Acquisition Controller, Embedded Serial Adapter, Legacy Peripheral Connectivity.

🖥️

Point-of-Sale Terminal Serial Interface

The MAX3232IPWRE4 is suitable for a point-of-sale terminal that must connect a modern controller to an RS-232 receipt printer, scanner, or display. Its two drivers and two receivers provide a complete bidirectional interface in one 16-TSSOP package, while the 250 kbit/s rate supports conventional legacy peripheral protocols. The 3 V to 5.5 V VCC range accommodates embedded 3.3 V and 5 V supply plans. The industrial −40 °C to 85 °C rating is useful in terminals deployed beyond controlled office environments. Designers should confirm logic thresholds, use the specified 0.1 µF charge-pump capacitors, and protect the externally accessible serial connector with suitable cable and ESD arrangements.

🏭

Industrial Serial Control Panel

The MAX3232IPWRE4 fits an industrial control panel that connects a PLC, data logger, or service computer through an RS-232 port. The 250 kbit/s maximum data rate is adequate for many supervisory protocols, while two driver and two receiver channels support full-duplex or multi-peripheral arrangements. Its industrial temperature range of −40 °C to 85 °C helps address temperature variation inside cabinets and production equipment. The integrated dual charge pump reduces the external component count required for bipolar RS-232 signaling. Keep the 0.1 µF charge-pump capacitors close to the IC, provide a low-impedance ground return, and route the serial side away from fast-switching circuitry to minimize coupling into the panel’s control electronics.

📟

Test and Measurement Equipment

MAX3232IPWRE4 can provide an RS-232 command and control connection in laboratory instruments, bench testers, and automated test systems. Its two transmitters and two receivers allow instrument-control software to exchange commands and receive measurements over separate serial channels. The 250 kbit/s operating capability aligns with many legacy instrument protocols, while the 3 V to 5.5 V supply range supports mixed-instrument logic architectures. The −40 °C to 85 °C operating range is beneficial for equipment used in variable ambient conditions. Confirm the instrument’s RS-232 level timing, handshake arrangement, and connector wiring before production. Maintain short ground returns and consider galvanic isolation when the connected equipment may develop ground-potential differences.

📊

Data Acquisition Controller

The MAX3232IPWRE4 is appropriate for a compact data-acquisition controller that must communicate with a legacy measurement instrument or service computer. A single 16-TSSOP device provides two transmit paths and two receive paths, simplifying channel allocation for configuration commands and returned records. The 250 kbit/s limit supports many moderate-speed acquisition-control protocols, although the software must respect the slower RS-232 rate. The device’s low 300 µA typical supply current is beneficial in compact controller designs with limited thermal budgets. Use the datasheet’s charge-pump capacitor arrangement and pinout, isolate analog and digital grounds according to the system architecture, and apply filtering or isolation if the RS-232 cable introduces external noise or ground offsets.

🔧

Embedded Serial Adapter

The MAX3232IPWRE4 can serve as the RS-232 conversion stage in an embedded USB-to-serial, Ethernet-to-serial, or processor-based communication adapter. The host logic operates at a compatible low-voltage level, while the transceiver supplies the bipolar voltage signaling required by an RS-232 port. Two drivers and two receivers support bidirectional command and status traffic, and the 250 kbit/s rate fits many legacy peripherals. The surface-mount 16-TSSOP package supports compact adapter boards, while the industrial temperature range allows deployment in equipment cabinets. Validate the host UART logic levels, respect the specified charge-pump capacitor values, and include protection appropriate to the connector’s exposure and cable length.

🖨️

Legacy Peripheral Connectivity

The MAX3232IPWRE4 enables a modern controller to retain compatibility with RS-232 printers, scales, programmers, and service equipment. Its 2/2 transceiver arrangement provides enough channels for typical host-to-peripheral communication, and the 250 kbit/s rate covers many legacy control protocols. Operation from 3 V to 5.5 V allows the interface to share a supply with either 3.3 V or 5 V embedded logic, subject to the logic-level requirements. The ±15 kV ESD protection on the serial connection pins improves robustness at externally accessible ports. Confirm the peripheral’s pinout, handshake signals, and connector gender, and use a common reference ground or an isolation strategy when the two connected systems can sit at different ground potentials.

סיכום מוצרים מומלצים

MAX3232E Improved MAX3232-family transceiver option בשימוש ב-: Point-of-Sale Terminal Serial Interface, Industrial Serial Control Panel, Test and Measurement Equipment, Data Acquisition Controller, Embedded Serial Adapter, Legacy Peripheral Connectivity TRS3232E Texas Instruments RS-232 transceiver family option בשימוש ב-: Point-of-Sale Terminal Serial Interface, Test and Measurement Equipment, Data Acquisition Controller, Legacy Peripheral Connectivity MAX3232CPWRE4 Texas Instruments בשימוש ב-: Industrial Serial Control Panel, Embedded Serial Adapter
What is the operating voltage of MAX3232IPWRE4?
The MAX3232IPWRE4 operates from a 3 V to 5.5 V VCC supply. According to the Texas Instruments MAX3232 datasheet, this range allows the transceiver to support both 3.3 V and 5 V systems. The receiver also accepts 5 V logic, making the device suitable for mixed-voltage embedded designs when the host interface and supply levels are checked against the device requirements.
How many RS-232 drivers and receivers does MAX3232IPWRE4 contain?
The MAX3232IPWRE4 contains two line drivers and two line receivers in a single 16-pin TSSOP package. According to the Texas Instruments MAX3232 datasheet, it also integrates a dual charge-pump circuit. Two channels are generally sufficient for a point-to-point link requiring one direction in each direction, while the 2/2 arrangement supports two drivers and two receivers for multipoint or multi-peripheral serial designs.
What is the maximum data rate of MAX3232IPWRE4?
The MAX3232IPWRE4 supports serial data rates up to 250 kbit/s. The Texas Instruments MAX3232 datasheet identifies this rate as a principal operating characteristic for the integrated RS-232 drivers and receivers. It makes the device appropriate for conventional RS-232 equipment, industrial controllers, and legacy peripherals, provided that the connected protocol, cable, and timing are designed for that bandwidth.
Does MAX3232IPWRE4 include ESD protection?
Yes. The MAX3232IPWRE4 includes pin-to-pin ±15 kV ESD protection on the serial-port connection pins, including ground. The Texas Instruments MAX3232 datasheet identifies this as a key protection feature. It improves tolerance of electrostatic discharge at externally accessible RS-232 connectors, although system designers should still use suitable cable routing, grounding, and connector-level protection practices.
What capacitors does the MAX3232IPWRE4 require?
The MAX3232IPWRE4 requires external 0.1 µF charge-pump capacitors. According to the Texas Instruments MAX3232 datasheet, these capacitors support the integrated dual charge-pump circuit that develops the bipolar RS-232 interface voltage. Place the capacitors close to their associated device pins and follow the datasheet connection diagram, including polarity and the required grounding arrangement.
Where can I download the MAX3232IPWRE4 datasheet PDF?
The MAX3232IPWRE4 datasheet PDF is available through the Texas Instruments document listing linked on this page. It describes the two-driver, two-receiver architecture, 3 V to 5.5 V supply range, 250 kbit/s operation, ±15 kV ESD protection, charge-pump capacitor arrangement, and pin descriptions. Use the manufacturer document for design sign-off and compare it with any cross-reference datasheet before releasing a replacement.
Where can I find the MAX3232IPWRE4 pinout?
The MAX3232IPWRE4 pin assignments are shown in the pin-description and typical-application sections of the Texas Instruments MAX3232 datasheet. The device is packaged in a 16-pin TSSOP, and its pins are divided among the two drivers, two receivers, charge-pump network, supply, and ground. Use the datasheet pin table when assigning PCB nets or creating a package symbol.
Is MAX3232IPWRE4 suitable for industrial equipment?
The MAX3232IPWRE4 is suitable for industrial equipment requiring an industrial-temperature RS-232 interface. The Texas Instruments product listing specifies an operating range of −40 °C to 85 °C, a 3 V to 5.5 V supply, and 250 kbit/s operation. For an industrial deployment, also verify enclosure temperature, isolation strategy, cable transients, and any application-specific qualification requirements.
What can replace MAX3232IPWRE4?
The Texas Instruments MAX3232E is the closest documented improvement to the MAX3232 family, with the manufacturer describing it as an improved direct drop-in replacement for MAX3232 designs. A true board replacement still requires confirmation of the exact ordering suffix, 16-TSSOP footprint, pinout, supply range, channel arrangement, logic thresholds, and operating-temperature grade before the substitute is released.
Is MAX3232E the same as MAX3232IPWRE4?
MAX3232E is an improved direct replacement for MAX3232, but it is not necessarily identical to every MAX3232 ordering code. Texas Instruments specifically recommends MAX3232E for new designs. Confirm the exact MAX3232E package and temperature suffix, then compare pinout, electrical limits, ESD rating, charge-pump capacitor requirements, and lifecycle requirements before treating it as a drop-in substitution.
When should I choose MAX3232IPWRE4 over MAX3232E?
Choose MAX3232IPWRE4 when an existing design is qualified around the original MAX3232 device and a drop-in change must preserve the established 16-TSSOP footprint and interface behavior. Choose MAX3232E for a new design when the manufacturer-recommended improved family member is preferable. The decision should also consider the exact ordering suffix, supply voltage, temperature grade, and any changes in device parameters.
Is MAX3232IPWRE4 appropriate for a point-of-sale terminal?
Yes, MAX3232IPWRE4 is appropriate for a point-of-sale terminal that requires a legacy RS-232 port. Its two transmitters and two receivers support a complete serial interface, its 250 kbit/s rate covers many conventional peripheral protocols, and its −40 °C to 85 °C range suits industrial terminal environments. The host processor should use logic-compatible levels, and the external RS-232 connector should include appropriate cable and ESD protection.
Where to buy MAX3232IPWRE4 online?
Use the Request a Quote form on this page to request MAX3232IPWRE4 availability, current commercial terms, and lead time. The form allows buyers to identify the exact 16-TSSOP ordering code and request a quotation without relying on a potentially stale static price. For production planning, include your required quantity, date code preference, shipment destination, and whether reel or other approved packaging is required.
What is the lead time for MAX3232IPWRE4?
Request the current MAX3232IPWRE4 lead time through the Request a Quote form on this page. Lead time depends on order quantity, inventory position, approved package configuration, and delivery requirements, so it should be confirmed for the specific purchase order. A production schedule should include sufficient time for lot traceability, incoming inspection, PCB assembly, and any required environmental or functional qualification.
What are the key specifications of MAX3232IPWRE4 that engineers should know?
The key specifications are a 3 V to 5.5 V supply, 250 kbit/s maximum data rate, two drivers, two receivers, 300 µA typical supply current, 0.1 µF external charge-pump capacitors, 5 V logic compatibility, and ±15 kV ESD protection. Texas Instruments packages the device in a 16-TSSOP with a −40 °C to 85 °C operating range. These parameters determine connector, cable, logic-interface, and thermal compatibility.
What is the best cross-brand equivalent for MAX3232IPWRE4?
No cross-brand equivalent can be confirmed as a production drop-in replacement from the available compatibility information. A candidate must use the same 16-TSSOP footprint, provide two drivers and two receivers, support a 3 V to 5.5 V supply and 250 kbit/s operation, and maintain compatible charge-pump and logic pin functions. Validate the candidate’s datasheet and pinout before selecting it for a new or revision-controlled PCB.

נתוני עזר הנדסיים עבור MAX3232IPWRE4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3232IPWRE4 when maintaining an existing industrial-temperature 16-TSSOP design requires the established MAX3232 electrical configuration, including two drivers, two receivers, a 3 V to 5.5 V supply, 250 kbit/s operation, and ±15 kV ESD protection. MAX3232E is generally the preferred choice for a new design because Texas Instruments describes it as an improved direct replacement for MAX3232, but its complete ordering suffix and parameters still require confirmation. MAX3232CPWRE4 may fit a same-family sourcing strategy when its ordering features are confirmed. TRS3232E belongs to the improved transceiver family and should be selected only after checking its exact pinout and temperature grade. For any substitution, preserve the 16-TSSOP footprint, validate the charge-pump network, and recheck logic levels, operating temperature, ESD requirements, and protocol timing.

השוואה עם חלופות

פרמטר מוצר זה MAX3232E MAX3232CPWRE4 TRS3232E
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transceiver Configuration 2/2 full RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbit/s 250 kbit/s 250 kbit/s 250 kbit/s
ESD Protection ±15 kV pin-to-pin ±15 kV family-level protection ±15 kV family-level protection ±15 kV family-level protection
Supply Current 300 µA typical 300 µA typical family value 300 µA typical family value 300 µA typical family value
External Charge-Pump Capacitor 0.1 µF 0.1 µF family value 0.1 µF family value 0.1 µF family value
Operating Temperature Range −40 °C to 85 °C Confirm exact ordering suffix −40 °C to 85 °C family indication Confirm exact ordering suffix

מבדילים עיקריים

  • Complete dual-channel RS-232 interface in one package (לעומתMAX3232E)
  • Pin-to-pin ESD protection on serial-port connections (לעומתTRS3232E)
  • Established 16-TSSOP integration (לעומתMAX3232CPWRE4)

הערות תכנון

Place the two specified 0.1 µF charge-pump capacitors adjacent to their MAX3232IPWRE4 pins and connect them according to the manufacturer datasheet’s typical application diagram. Keep their return paths short and avoid routing the charge-pump node beneath sensitive analog or high-speed digital traces. The capacitors generate the bipolar RS-232 voltage levels, so long or high-impedance connections can increase ringing and reduce interface reliability.

Separate the logic-side nets from the RS-232 connector side as far as the package and board area allow. Provide a direct, low-impedance ground return between the transceiver and connector shield or chassis reference, and route driver outputs away from receiver inputs where the board outline allows. These steps reduce susceptibility to cable-borne transients and prevent transmitted edge noise from coupling into received data.

Do not treat a family name such as MAX3232E or TRS3232E as a drop-in substitute without checking the complete ordering code. Confirm the 16-TSSOP footprint, pin numbering, temperature grade, supply range, charge-pump connections, and transceiver channel arrangement. In particular, changing the number of drivers or receivers can invalidate a PCB even when the package name is unchanged.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The accessible product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this industrial interface IC.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX3232IPWRE4 datasheet MAX3232IPWRE4 pinout MAX3232IPWRE4 datasheet pdf MAX3232IPWRE4 equivalent MAX3232IPWRE4 replacement MAX3232IPWRE4 cross reference MAX3232IPWRE4 vs MAX3232E MAX3232IPWRE4 price MAX3232IPWRE4 stock Texas Instruments MAX3232IPWRE4 MAX3232IPWRE4 16-TSSOP MAX3232IPWRE4 RS-232 transceiver

רכיבים ומונחים קשורים

Texas Instruments MAX3232IPWRE4 MAX3232E MAX3232CPWRE4 TRS3232E RS-232 transceiver line driver line receiver multichannel interface IC dual charge pump TIA/EIA-232-F ITU V.28 ESD protection 16-TSSOP TSSOP package family surface-mount package 3 V to 5.5 V supply 250 kbit/s data rate 300 µA supply current point-of-sale terminal industrial serial controller test and measurement equipment data-acquisition controller embedded serial adapter legacy peripheral connectivity
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר