MAX3243CPWR - 250kbps Multichannel RS-232 | Texas Instruments
部品番号: MAX3243CPWR ✓ 生産中MAX3243CPWR 概要
An RS-232 transceiver is an interface IC that combines line drivers, line receivers, and the charge-pump circuitry needed to generate the positive and negative voltage swings required by RS-232. The MAX3243 belongs to the RS-232 transceiver family within interface ICs, combining digital communication, analog level shifting, and electrostatic-discharge protection in one device.
The MAX3243CPWR integrates three RS-232 drivers and five RS-232 receivers, supports data rates up to 250 kbps, and operates from a single 3 V to 5.5 V supply. Its ±15 kV HBM ESD protection is a key feature for ports exposed to cables, connectors, or electrostatic discharge. The device is offered in the 28-pin TSSOP PW package with an operating temperature range of 0°C to 70°C.
Technically, the receiver and driver architecture allows multiple RS-232 ports to share common supply and ground rails while maintaining the voltage translation required by the RS-232 standard. On-board charge-pump circuitry supports operation from a supply below the traditional ±12 V RS-232 levels, reducing the external power requirements of portable and embedded equipment.
Typical uses include industrial control interfaces, point-of-sale terminals, serial adapters, data-acquisition equipment, and embedded systems that connect to legacy RS-232 peripherals. The three-driver, five-receiver arrangement is particularly useful when a controller needs several transmit paths but fewer receive paths.
PCB design should account for the charge-pump capacitors and follow the manufacturer’s recommended decoupling and layout pattern. Keep the RS-232 driver outputs away from sensitive analog or high-speed digital traces, connect the ground reference correctly through the cable interface, and provide protection appropriate to the exposed connector environment.
This page organizes the key electrical limits, package information, drop-in alternatives, application guidance, and design considerations for engineers evaluating MAX3243CPWR across industrial and embedded RS-232 designs.
ドロップイン代替品: MAX3243CPWR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3243CPWR (同一形状・フットプリント) — 相違点: Product Type, Package, Operating Temperature Range, Maximum Data Rate, AEC-Q100 Qualification.
MAX3243ECPWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243IPW
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243CPW
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243EIPWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243CPWR 仕様
| Product Type | RS-232 line driver/receiver transceiver |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV HBM |
| 動作温度範囲 | 0°C to 70°C |
| パッケージ | 28-pin TSSOP (PW) |
| ピン数 | 28 pins |
| 実装タイプ | Surface mount |
| Supply Configuration | Single supply |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MAX3243CPWR 28-pin tssop (pw) ピン配置ガイド
MAX3243CPWR (28-pin tssop (pw) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3243CPWR.
詳細は データシート をご参照ください。
主な用途
MAX3243CPWR の用途: 6 件s: Industrial Control Terminal Interfaces, Point-of-Sale and Peripheral Connectivity, Data Acquisition Equipment, Embedded Serial Port Expansion, Serial Adapter and Gateway Products, Instrument and Test Equipment Control.
Industrial Control Terminal Interfaces
The MAX3243CPWR fits industrial terminal and controller designs that need several RS-232 ports from a low-voltage supply. Its three drivers can support outbound control or status links, while five receivers can monitor commands, acknowledgments, and sensor-controller traffic. The 250 kbps maximum data rate is appropriate for many legacy supervisory protocols, while the 3 V to 5.5 V operating range accommodates 3.3 V and 5 V logic systems. The 0°C to 70°C grade suits controlled indoor equipment, but the complete serial interface still needs correct grounding, cable routing, and connector protection.
おすすめ
Point-of-Sale and Peripheral Connectivity
Point-of-sale terminals, receipt printers, scales, and other legacy peripherals commonly use RS-232 for short-distance point-to-point links. The MAX3243CPWR provides three transmit and five receive channels, allowing one controller to manage several peripherals or combine command outputs with multiple status inputs. Its 250 kbps capability is more than adequate for typical transaction and configuration traffic. Running from 3 V to 5.5 V simplifies integration with mixed-voltage embedded systems, but ground offsets and cable transients should be handled at the connector and interface layout.
おすすめ
Data Acquisition Equipment
The MAX3243CPWR can connect laboratory instruments, programmable controllers, and data-acquisition units that retain RS-232 interfaces. Five receivers allow a host to collect status, alarm, trigger, and measurement-related signals, while three drivers support command outputs and acknowledgments. The device operates from 3 V to 5.5 V and supports signaling up to 250 kbps, making it suitable for moderate-speed serial instrumentation. Designers should separate driver return currents from sensitive measurement grounds and use the manufacturer’s charge-pump capacitor placement to prevent switching noise from disturbing analog circuitry.
おすすめ
Embedded Serial Port Expansion
Embedded processors often have limited UART resources, making a multi-channel RS-232 transceiver useful when several legacy serial ports must be retained. The MAX3243CPWR converts between low-voltage digital signaling and RS-232 levels, providing three driver outputs and five receiver inputs from one 3 V to 5.5 V supply. Its 28-pin TSSOP package supports compact board layouts, and its 250 kbps rate suits configuration and supervisory protocols. Firmware should define clear channel direction, handle absent or floating receivers correctly, and coordinate software flow control where required by the connected device.
おすすめ
Serial Adapter and Gateway Products
Serial gateways and protocol converters can use the MAX3243CPWR to connect one embedded controller to multiple RS-232 endpoints. The three-driver, five-receiver arrangement supports multi-drop or multi-device systems where several nodes exchange commands and status, while the 250 kbps rate accommodates common industrial and legacy serial protocols. Its low-voltage supply requirement simplifies adapter-board power design compared with traditional RS-232 implementations. However, each connected node must share a suitable reference ground, and long cables or exposed industrial environments require appropriate transient and surge protection beyond the device’s ±15 kV HBM ESD rating.
おすすめ
Instrument and Test Equipment Control
Test and measurement instruments frequently expose RS-232 for legacy commands, remote calibration, and status reporting. The MAX3243CPWR allows an instrument controller to send commands through as many as three driver channels and receive responses or interlocks through five receiver channels. The 250 kbps maximum data rate is suitable for many automated test protocols, and the 3 V to 5.5 V supply range simplifies integration with embedded control hardware. Keep driver traces away from sensitive analog inputs and ensure that unused receiver inputs have a defined state to prevent unwanted signals or noise from affecting system behavior.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3243CPWR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3243ECPWR | MAX3243IPW | MAX3243CPW | MAX3243EIPWR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) |
| Device Type | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | MAX3243-family RS-232 transceiver | 3/5 RS-232 transceiver | MAX3243-family RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Number of Drivers | 3 | 3 | 3 | 3 | 3 |
| Number of Receivers | 5 | 5 | 5 | 5 | 5 |
| ESD Protection | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
主な差別化要因
- Asymmetric channel count supports mixed command and status links (vs MAX3221IPWR)
- Low-voltage operation reduces system power requirements (vs MAX3243ECPWR)
- ESD protection is integrated into the interface device (vs MAX3243IPW)
設計ノート
Use the manufacturer datasheet’s recommended charge-pump capacitor and decoupling layout. Place each capacitor directly across its designated pins, keep the charge-pump and driver current paths compact, and provide a low-impedance ground plane beneath the device. Long capacitor traces can degrade the generated RS-232 voltage and increase radiated noise, particularly when several channels operate simultaneously.
Do not treat the ±15 kV HBM ESD rating as protection against every cable-borne surge. Add connector-level protection when the interface can encounter industrial transients, long cables, or hot-plug events. Also verify every unused receiver input against the manufacturer’s recommended termination state; an unconfigured floating receiver can consume noise margin or create false transitions.
Route RS-232 driver outputs directly toward the connector and keep them separated from clock, sensor, and analog signal traces. Maintain a continuous signal-ground path through the interface, but keep high-current return paths from motors, relays, and power converters out of the transceiver ground region. This separation reduces current-induced noise that could otherwise interfere with sensitive circuitry sharing the same board.
コンプライアンス情報
The available manufacturer and distributor information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this orderable part.