Texas Instruments

MAX3243ECDW - 3/5 RS-232 Transceiver, 500 kbps | Texas Instruments

部品番号: MAX3243ECDW ✓ 生産中
3 V to 5.5 V Vdss 28-pin SOIC (DW) Package
MOQ: 1 |

MAX3243ECDW 概要

Texas Instruments MAX3243ECDW is a 3-driver, 5-receiver RS-232 transceiver operating from 3 V to 5.5 V at data rates up to 500 kbps, packaged in a 28-pin SOIC (DW). The device integrates three RS-232 line drivers and five receivers, including a complementary always-active receiver for external monitoring. Its protected I/O pins provide ±15 kV IEC ESD protection, making it suitable for industrial, communications, and data-processing equipment exposed to electrostatic discharge.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy alongside signal conditioners, level translators, and isolated communication interfaces. Unlike a modern differential or differential-based communications standard, RS-232 uses single-ended signaling and is intended principally for point-to-point, short-distance equipment interconnects.

Key features include a 3 V to 5.5 V supply range, 500 kbps maximum signaling rate, three transmit channels, five receive channels, and ±15 kV IEC ESD protection. The MAX3243E device family also incorporates power-management features intended to reduce power consumption when communication is not required. Its 28-pin SOIC package provides a conventional surface-mount interface for industrial control systems, POS terminals, data acquisition equipment, and service interfaces.

Technically, the MAX3243ECDW combines charge-pump level shifting, RS-232 drivers, and receive channels in one package. The driver channels present bipolar RS-232 output levels, while the receivers include threshold and hysteresis characteristics designed for dependable operation with the voltage swings used by RS-232 links. The manufacturer identifies the MAX3243 family as production and specifies operation from 0°C to 70°C for the MAX3243ECDW ordering option.

Typical uses include industrial serial controllers, instrumentation links, printer or terminal interfaces, programmable logic controller communications, and embedded systems requiring more receive channels than transmit channels. For designs with equal numbers of transmit and receive paths, a two-driver, two-receiver transceiver may be more economical. The five receivers also support monitoring paths, status inputs, or one primary link plus additional receive-only connections.

PCB design should preserve the short, direct routing associated with high-speed RS-232 transceivers, follow the manufacturer pin and bypass-capacitor recommendations, and provide appropriate return paths for each interface. Keep exposed connector and cable-side circuitry away from sensitive logic, and design enclosure and signal routing so externally accessible lines receive suitable ESD protection and common-mode margin.

ドロップイン代替品: MAX3243ECDW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

MAX3243ECDW 仕様

Product Type 3/5 RS-232 line driver/receiver transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Driver Channels 3 channels
Receiver Channels 5 channels
Receiver Configuration 3/5 full RS-232 configuration with complementary always-active receiver
ESD Protection ±15 kV IEC ESD protection
動作温度範囲 0°C to 70°C
パッケージ 28-pin SOIC (DW)
Package Width 7.50 mm (0.295 inch)
実装タイプ Surface mount

MAX3243ECDW 7.50 mm (0.295 inch) ピン配置ガイド

MAX3243ECDW (7.50 mm (0.295 inch) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3243ECDW の 7.50 mm (0.295 inch) パッケージピン配置図

詳細なピン配置データはありません: MAX3243ECDW.

詳細は データシート をご参照ください。

主な用途

MAX3243ECDW の用途: 6 件s: Industrial Controller Serial Interface, Data Acquisition Equipment, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Embedded Service and Configuration Port, Printer and Terminal Communication.

🏭

Industrial Controller Serial Interface

The MAX3243ECDW fits industrial controller and service-port designs that require multiple RS-232 receive paths while retaining as many as three transmit channels. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, and the 500 kbps capability provides ample margin for configuration protocols and moderate-speed data transfers. The five receivers are especially useful when the controller must read several peripheral status lines in addition to its main communication channel. The ±15 kV IEC ESD protection provides an established interface level of protection, although exposed industrial cabling may require additional surge and common-mode protection.

🖥️

Data Acquisition Equipment

The MAX3243ECDW is appropriate for data-acquisition systems that collect commands through one main link and receive additional measurement, trigger, or status information. Five receiver channels reduce the need for separate receive-only interface devices, while three driver channels can support a primary instrument, a downstream device, and a configuration or diagnostic port. Operation up to 500 kbps allows the interface to handle compressed measurement records and laboratory automation traffic. Designers should maintain short return paths, provide the manufacturer's recommended charge-pump bypass network, and separate sensitive measurement circuitry from connector-side transients.

🔧

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3243ECDW to consolidate serial peripheral connections into one standardized RS-232 interface. Three transmitters can address a receipt printer, customer display, or peripheral controller, while five receivers can monitor multiple device acknowledgements and status inputs. The device's 500 kbps rate supports typical command and transaction traffic without acting as the limiting element. Its 28-pin SOIC package is suitable for compact controller boards, and its 3 V to 5.5 V range allows integration with mixed-voltage digital logic. External protection should be considered where cables leave an enclosure.

🔧

Instrumentation and Test Equipment

The MAX3243ECDW is useful in programmable instrumentation that requires several low-speed RS-232 control ports and a dependable always-active monitoring receiver. The 3-driver, 5-receiver arrangement supports remote commands, trigger coordination, and return-channel monitoring within one package. A maximum rate of 500 kbps is suitable for many legacy test-control protocols, while the 0°C to 70°C grade targets controlled laboratory and industrial environments. Keep connector routing away from precision analog sections, use a solid ground reference, and validate cable length against the selected baud rate and driver loading.

🧩

Embedded Service and Configuration Port

The MAX3243ECDW can consolidate an embedded system's service, console, and equipment configuration interfaces onto a common RS-232 connection strategy. Its three drivers support outbound command, diagnostic, and update channels, while five receivers accept acknowledgements, status, and externally generated control signals. The 500 kbps limit is well above many service-port baud rates, and the 3 V to 5.5 V range accommodates processors operating at either 3.3 V or 5 V. Firmware should provide contention control because multiple enabled drivers connected to one bus can conflict, and unused outputs should be handled according to the manufacturer guidance.

🖨️

Printer and Terminal Communication

The MAX3243ECDW suits legacy printer, terminal, and peripheral-controller equipment that needs more receive capacity than a conventional 2/2 transceiver. One of the three transmit channels can serve the main printer link, another can support a status or configuration device, and the third remains available for diagnostics. Five receiver channels can monitor acknowledgements, paper status, and control inputs. The 500 kbps maximum supports the moderate throughput commonly used by serial peripherals. System designers should use the specified power and charge-pump capacitors and ensure that cable transients do not bypass the board's protection strategy.

What is the MAX3243ECDW?
The MAX3243ECDW is a 3 V to 5.5 V RS-232 transceiver with three line drivers, five line receivers, and a maximum data rate of 500 kbps. According to the Texas Instruments MAX3243E product information, the exact MAX3243ECDW ordering option is supplied in a 28-pin SOIC (DW) package for operation from 0°C to 70°C.
What are the key specifications of MAX3243ECDW that engineers should know?
The MAX3243ECDW combines three RS-232 drivers, five receivers, a 3 V to 5.5 V supply range, and a maximum data rate of 500 kbps in a 28-pin SOIC package. The Texas Instruments product information also identifies ±15 kV IEC ESD protection and a 0°C to 70°C operating range. These characteristics make it appropriate for systems with multiple incoming serial signals and up to three outbound RS-232 links.
Where to download the MAX3243ECDW datasheet PDF?
The MAX3243ECDW datasheet and ordering information are available through the official Texas Instruments MAX3243E product page. Open the MAX3243ECDW ordering table on that page and select the linked data sheet for the DW package. The manufacturer page identifies the device as a 28-pin SOIC operating from 0°C to 70°C with ±15 kV IEC ESD protection.
Where can I find the MAX3243ECDW pinout?
Use the pin-description table and package drawing in the official Texas Instruments MAX3243E data sheet to assign the 28 SOIC connections. The MAX3243ECDW ordering page confirms that DW is a 28-pin SOIC package. Do not infer individual pin functions from a generic RS-232 transceiver because charge-pump, driver, receiver, and power arrangements can differ among manufacturers.
What is the difference between three drivers and five receivers in MAX3243ECDW?
Three drivers allow the MAX3243ECDW to transmit data on as many as three RS-232 channels, while five receivers can receive data on five channels. This imbalance is useful when a system needs one principal outgoing connection plus additional monitoring, status, or incoming links. The Analog Devices MAX3243 family description confirms the 3-driver, 5-receiver configuration.
Is MAX3243ECDW suitable for industrial RS-232 equipment?
The MAX3243ECDW is suitable for many industrial RS-232 interfaces because it supports a 3 V to 5.5 V supply, 500 kbps signaling, and ±15 kV IEC ESD protection. Its specified 0°C to 70°C operating range suits controlled indoor equipment. For wider temperature or enhanced automotive qualification, select a variant whose ordering information explicitly covers those requirements.
Does MAX3243ECDW include ESD protection?
Yes. The MAX3243ECDW includes ±15 kV IEC ESD protection on its RS-232 interface functions. Texas Instruments identifies this feature in the official MAX3243E product description. External protection may still be required for exposed cables or connectors subject to lightning, large industrial transients, or standards other than the device's specified IEC ESD exposure.
What can replace the MAX3243ECDW?
A valid drop-in replacement must use the same 28-pin SOIC footprint, preserve pin-to-pin connections, and provide three drivers, five receivers, a 3 V to 5.5 V supply range, and comparable electrical performance. The MAX3232EC-family devices are not direct replacements because they provide only two drivers and two receivers, even though they use similar RS-232 interface technology. Validate any substitute against the complete data sheet rather than relying only on package type.
Is MAX3243ECDW the same as MAX3232EC?
No. MAX3243ECDW provides three drivers and five receivers, while MAX3232EC-family transceivers provide two drivers and two receivers. Their channel counts and SOIC pin assignments differ, so MAX3232EC is not a pin-to-pin substitute for the 28-pin MAX3243ECDW. A redesign or board change would be required.
When should I choose MAX3243ECDW instead of a 2/2 RS-232 transceiver?
Choose MAX3243ECDW when the system must transmit on up to three RS-232 channels or monitor more than two incoming signals. A 2/2 transceiver is normally preferable for simple point-to-point links because it uses fewer channels, but it cannot replace the MAX3243's three-driver, five-receiver arrangement without changing the PCB and interface architecture.
What is the maximum data rate of MAX3243ECDW?
The MAX3243ECDW supports RS-232 data rates up to 500 kbps. Texas Instruments specifies this rate for the MAX3243E family in its official product information. Actual system throughput also depends on cable length, baud-rate tolerance, transceiver loading, and the performance of the connected UART or host interface.
How does MAX3243ECDW compare with MAX3243ECDW alternatives?
The MAX3243ECDW should be compared primarily against 28-pin, 3-driver, 5-receiver RS-232 transceivers with compatible supply voltage, shutdown behavior, and channel assignment. Many general RS-232 transceivers use only two transmitters and two receivers, making them functionally close but not drop-in replacements. The manufacturer ordering table remains the authoritative source for available MAX3243E package and temperature options.
Where can I buy MAX3243ECDW and check its lead time?
Use the Request a Quote form on this page to request MAX3243ECDW availability, current lead time, and a quotation. The Texas Instruments ordering information identifies the part as production and specifies its 28-pin SOIC configuration, but current stock and delivery schedules change by order quantity and supply conditions.
What is the price of MAX3243ECDW?
Request a current MAX3243ECDW quotation through the Request a Quote form on this page. The structured pricing area is the authoritative source for transaction-specific price and availability, and its values can change with quantity, packaging, and market conditions.
Is MAX3243ECDW in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact MAX3243ECDW ordering code. Texas Instruments identifies the MAX3243 family as production, but component availability can vary by package, quantity, and date. Provide the required delivery quantity and location when requesting a quotation.

エンジニアリング参考データ: MAX3243ECDW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX3243ECDW when the PCB genuinely needs three RS-232 transmit channels, five receive channels, or both. It is particularly useful for industrial controllers, data-acquisition equipment, and embedded systems that monitor several incoming signals while driving multiple peripherals. Its 3 V to 5.5 V range supports common 3.3 V and 5 V logic systems, and the 500 kbps rate covers most legacy control protocols. Select a 2/2 RS-232 transceiver such as MAX3232ECDR for a conventional point-to-point link because it uses fewer channels and may simplify the PCB. Use a 1/1 interface such as MAX232EIDR for a single peripheral connection. None of those lower-channel-count devices is a pin-to-pin drop-in replacement for MAX3243ECDW. Before finalizing a substitute, verify the SOIC pin count, package drawing, channel enable arrangement, charge-pump requirements, and ESD rating against the original design.

主な差別化要因

  • Five receive channels support more incoming RS-232 signals (vs MAX3232ECDR)
  • Three transmit channels support consolidated equipment control (vs MAX3232ECDR)
  • 500 kbps operation supports faster legacy serial links (vs MAX232EIDR)

設計ノート

Place the charge-pump capacitors and device bypass capacitors close to their specified pins, and route the associated current loops with minimal enclosed area. Keep the 28-pin SOIC footprint compatible with the DW package drawing and preserve adequate solder mask and copper clearance around adjacent pins. This is particularly important in compact equipment where long capacitor routes can increase switching current in the charge-pump loop and couple noise into surrounding circuitry.

Do not treat a shared RS-232 bus as if every driver could be enabled simultaneously. The MAX3243ECDW has three transmit channels, and multiple active drivers connected to the same node can produce conflicting output states. Use independent ports, directional control, or a multiplexer where several devices must share a conductor. Also confirm the exact receiver and enable pin functions in the manufacturer pin table before assigning board nets.

Treat connector-side and logic-side grounds as part of the signal path. Provide a continuous return route, keep long exposed-cable traces away from sensitive digital and analog nets, and place any required external transient protection where cable conductors enter the board. The specified ±15 kV IEC ESD protection is useful but does not replace coordinated enclosure, grounding, and surge-protection design for harsh industrial environments.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer identifies ±15 kV IEC ESD protection, but the supplied information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this ordering option is specified for 0°C to 70°C industrial/environmental use rather than automotive qualification.

関連検索

MAX3243ECDW datasheet MAX3243ECDW pinout MAX3243ECDW datasheet pdf MAX3243ECDW equivalent MAX3243ECDW replacement MAX3243ECDW drop-in replacement MAX3243ECDW price MAX3243ECDW stock MAX3243ECDW 28 pin SOIC MAX3243ECDW 500 kbps RS-232 Texas Instruments MAX3243ECDW MAX3243ECDW vs MAX3232ECDR MAX3243ECDW industrial serial interface MAX3243ECDW ESD protection

関連部品&用語

Texas Instruments MAX3243ECDW MAX3243E MAX3232ECDR MAX232EIDR RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor single-ended signaling 3 V to 5.5 V power supply 500 kbps data rate IEC ESD protection 28-pin SOIC SOIC family surface mount industrial control data acquisition charge pump point-to-point communication ground reference external surge protection
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示