Texas Instruments

MAX3386EIDW - 3/2 RS-232 Transceiver | Texas Instruments

部品番号: MAX3386EIDW ✗ 生産終了
Split VL supply pin Vdss 20-SOIC (0.295 inch, 7.50 mm width) Package
MOQ: 1 |

MAX3386EIDW 概要

Texas Instruments MAX3386EIDW is a 3-driver, 2-receiver RS-232 transceiver with a split supply pin for the logic side, a 20-SOIC package, and enhanced ESD protection rated at ±25 kV on the RIN inputs and DOUT outputs. It is designed for mixed-voltage systems in which the transceiver logic side requires a separate supply from the RS-232 side.

An RS-232 transceiver is an interface IC that bridges a digital logic system and an RS-232 serial link. In the transmit direction, drivers convert logic-level signals into RS-232 levels; in the receive direction, receivers convert RS-232 inputs into compatible logic levels. The MAX3386E belongs to the interface IC hierarchy and supports bidirectional serial connectivity between embedded equipment and external data ports.

The MAX3386EIDW provides three transmit drivers and two receive inputs, allowing one logic-side connection to serve multiple RS-232 lines. Its split VL supply arrangement supports mixed-voltage logic systems by allowing the logic-side supply to be selected independently from the transceiver’s other supply connections. Enhanced input and output ESD protection improves robustness against electrostatic discharge encountered during normal handling, cable connection, and industrial environments.

The MAX3386EIDW is identified in the manufacturer documentation as the MAX3386E RS-232 transceiver with split supply pin for logic side. It is offered in a 20-SOIC package measuring 0.295 inches, or 7.50 mm, in body width. The E suffix denotes enhanced ESD protection, while the exact operating-temperature grade and ordering suffix details should be confirmed in the manufacturer datasheet before production release.

Typical uses include industrial control links, point-of-sale equipment, serial adapters, instrumentation, and embedded systems that exchange data through RS-232 ports. The three-driver and two-receiver arrangement can support multiple signal directions on one board, while the split logic-side supply can simplify interfacing with modern low-voltage processors. Any replacement must preserve the exact pinout, supply arrangement, logic levels, and ESD requirements of the original PCB.

For PCB design, keep RS-232 driver and receiver routes away from sensitive analog signals, use a solid ground reference, and place protection and bypass components close to their associated pins. Because this part is listed as obsolete by one distributor, new production designs should confirm lifecycle status and obtain an approved source before committing to a long-term bill of materials.

This page combines lifecycle and package information, verified pricing treatment, drop-in replacement evaluation, and practical design guidance to support faster component selection and board-level risk assessment.

ドロップイン代替品: MAX3386EIDW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3386EIDW (同一形状・フットプリント) — 相違点: Package, Driver Count, ESD Protection, Lifecycle Status, Logic-Side Supply.

Texas Instruments
Package: 20-SOIC (0.295", 7.50mm width)
ESD Protection: ±25kV
Logic-Side Supply: Split supply pins
比較対象 MAX3386EIDW →
Texas Instruments
Package: 20-pin TSSOP (PW)
Driver Count: 3 drivers
ESD Protection: ±15kV IEC ESD protection
比較対象 MAX3386EIDW →

MAX3386EIPW

✅ ドロップイン
Texas Instruments
📦 20-SOIC
RS-232 transceiver · 3 drivers · 2 receivers · 250kbps · 3V to 5.5V · Split VL supply pin · ±15kV IEC ESD protection · ±15kV human-body-model ESD protection

価格はお問い合わせください

データシートを見る →

TRS3386ECDW

✅ ドロップイン
📦 20-SOIC
Three drivers and two receivers with split supply pins are retained; exact supply, ESD, and temperature differences require cross-checking.

📋 参考代替品(カタログ未掲載)

MAX3386EIDW 仕様

Product Type RS-232 transceiver
Transceiver Configuration 3 drivers / 2 receivers
Driver Count 3
Receiver Count 2
Logic-Side Supply Arrangement Split VL supply pin
Enhanced ESD Protection ±25 kV
ESD-Protected Inputs RIN inputs
ESD-Protected Outputs DOUT outputs
パッケージ 20-SOIC (0.295 inch, 7.50 mm width)
実装タイプ Surface mount
RoHS ステータス ROHS3 compliant
ライフサイクル状態 Obsolete

MAX3386EIDW 20-soic (0.295 inch, 7.50 mm width) ピン配置ガイド

MAX3386EIDW (20-soic (0.295 inch, 7.50 mm width) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3386EIDW の 20-soic (0.295 inch, 7.50 mm width) パッケージピン配置図

詳細なピン配置データはありません: MAX3386EIDW.

詳細は データシート をご参照ください。

主な用途

MAX3386EIDW の用途: 6 件s: Industrial Serial Control, Point-of-Sale Terminal Interface, Serial Adapter and Dongle, Test and Measurement Equipment, Embedded Equipment Communication, Legacy Data Port Retrofit.

🏭

Industrial Serial Control

The MAX3386EIDW fits industrial control equipment that must connect a low-voltage controller to legacy RS-232 equipment through three outbound and two inbound lines. Its split VL supply pin allows the logic side to be separated from the other supply connections, which is useful when the host controller does not operate at the same voltage as the complete interface circuit. The 3/2 arrangement concentrates several RS-232 signals in one 20-SOIC device, while ±25 kV enhanced ESD protection on RIN and DOUT adds protection at externally accessible interfaces. The designer should still verify logic thresholds, supply limits, and the complete application circuit in the manufacturer datasheet before layout release.

🖥️

Point-of-Sale Terminal Interface

The MAX3386EIDW can connect point-of-sale peripherals that retain RS-232 communication ports while the main terminal logic operates at a lower voltage. Three drivers support several outbound commands or status signals, while two receivers provide inbound peripheral responses. The split VL supply pin is particularly relevant when the logic side and interface circuitry use different supply levels. Its enhanced ±25 kV ESD protection on RIN inputs and DOUT outputs helps withstand electrostatic discharge at externally connected lines. Before adoption, confirm the operating-temperature grade, supply tolerances, and signal-level compatibility against the peripheral interface specification.

🔧

Serial Adapter and Dongle

The MAX3386EIDW is suitable for compact serial adapters and legacy communication dongles that translate host logic into RS-232 levels. Its three transmitters and two receivers support several control and data lines without requiring three separate transceiver packages. The 20-SOIC format simplifies assembly relative to larger through-hole interfaces, and the split logic-side supply can ease connection to compatible 3.3 V or other mixed-voltage host logic when the device limits permit it. The designer must maintain a low-impedance ground connection, keep cable-side routing separated from sensitive logic, and verify the complete electrical limits before production.

📺

Test and Measurement Equipment

The MAX3386EIDW can bridge laboratory instrument control logic with external RS-232 equipment through its three transmitters and two receivers. The split VL supply arrangement supports systems in which the instrument controller uses a distinct logic voltage, while the enhanced ESD protection on receiver inputs and driver outputs improves robustness around user-accessible cable connections. Its multiple channels reduce the number of discrete line interfaces required on an instrument main board. However, because the target is listed as obsolete, new instrument platforms should evaluate a current transceiver unless preserving an existing chassis or board architecture makes a qualified drop-in replacement more practical.

🧩

Embedded Equipment Communication

The MAX3386EIDW supports embedded systems that retain an RS-232 service or configuration port while using a modern processor or programmable logic device on the logic side. Three driver outputs can carry command, enable, or status lines, and two receiver inputs can return acknowledgements or remote signals. The split VL pin helps isolate the host-side voltage requirement from other supply connections. In a compact embedded assembly, the 20-SOIC package also offers a practical pin count for three transmit and two receive functions. The board designer should account for RS-232 level translation on the cable side and use the manufacturer reference circuit for supply bypassing and logic-side connections.

🔧

Legacy Data Port Retrofit

The MAX3386EIDW is useful when an existing RS-232 data port must be retained during a system retrofit but the replacement controller has different logic-side requirements. The split supply pin allows a mixed-voltage interface arrangement, while the three-driver and two-receiver organization preserves several legacy port signals in a single device. The 20-SOIC footprint can assist with board-reuse planning, although a footprint match alone does not establish electrical compatibility. Before installing the part, compare every power pin, driver output, receiver input, and ground connection in the original datasheet, and confirm that the source and target equipment do not require automatic-power or ground-signaling behavior.

What is the MAX3386EIDW?
The MAX3386EIDW is a Texas Instruments 3-driver, 2-receiver RS-232 interface transceiver in a 20-SOIC package. According to the manufacturer documentation, it includes a split VL supply pin for mixed-voltage logic systems and enhanced ESD protection rated at ±25 kV on the RIN inputs and DOUT outputs.
What is the operating voltage of MAX3386EIDW?
The MAX3386EIDW uses separate supply connections for its logic side and other internal operating sections. The exact allowable voltage ranges for VL and the other supply pins must be taken from the pin-description and electrical-characteristics tables in the MAX3386E manufacturer datasheet before selecting pull-up, level-shifting, or bypass components.
How many RS-232 drivers and receivers does MAX3386EIDW have?
The MAX3386EIDW contains three RS-232 drivers and two receivers, as identified in its manufacturer datasheet description and distributor listing. This 3/2 arrangement supports three outbound RS-232 signals and two inbound RS-232 signals while presenting a common logic-side interface to the host controller.
What ESD protection does MAX3386EIDW provide?
The MAX3386EIDW provides enhanced ESD protection rated at ±25 kV on the RIN inputs and DOUT outputs. The listed rating describes protected device terminals; the applicable test method and qualification details should be confirmed in the MAX3386E manufacturer datasheet rather than inferred from the distributor summary.
Where can I download the MAX3386EIDW datasheet PDF?
The MAX3386EIDW datasheet is available through the linked Texas Instruments documentation result, which points to the 14-page MAX3386E document. Use the manufacturer datasheet for the authoritative pin descriptions, supply limits, electrical characteristics, ESD test conditions, and recommended application circuit.
Where can I find the MAX3386EIDW pinout?
The MAX3386EIDW pinout is found in the pin-description table of the MAX3386E manufacturer datasheet. The device is in a 20-SOIC package, but pin names and functions must be assigned exactly from that table because a replacement is only suitable when its power, ground, driver, receiver, and split-supply connections align with the original board.
Is MAX3386EIDW suitable for mixed-voltage systems?
The MAX3386EIDW is specifically designed with a split VL supply pin for compatibility with mixed-voltage systems. According to the MAX3386E manufacturer datasheet, this separate logic-side supply can support a host operating at a lower voltage than the rest of the interface circuit, subject to the specified operating limits.
Where can I buy MAX3386EIDW online?
Use the Request a Quote form on this page to ask about MAX3386EIDW availability, condition, packaging, and current lead time. Because the target is listed as obsolete, procurement should include written confirmation of lifecycle status, remaining inventory, traceability, and whether any lot is suitable for the intended production build.
What is the price of MAX3386EIDW?
The current price for MAX3386EIDW depends on quantity, condition, packaging, and source. Submit the target MPN through the Request a Quote form on this page for a current quotation; for an obsolete component, traceability and inspectability should be evaluated alongside the quoted commercial terms.
What is the lead time for MAX3386EIDW?
The lead time for MAX3386EIDW is not established by the manufacturer listing and must be confirmed for the requested quantity and package. Use the Request a Quote form on this page to request current lead time, available stock, minimum order quantity, and any obsolete-part restrictions before scheduling a build.
Is MAX3386EIDW in stock?
Inventory for MAX3386EIDW changes and cannot be confirmed from a static product record. Request current stock through the Request a Quote form on this page, specifying the required quantity and Tube packaging, because the target is listed as obsolete and availability may be limited.
What is the best drop-in replacement for MAX3386EIDW?
The TRS3386ECDW is the closest cross-brand candidate identified for drop-in evaluation because it is described as a three-driver, two-receiver RS-232 device with split supply pins for mixed-signal operation. Final qualification still requires a complete pin-by-pin comparison, supply-range check, and confirmation of every ESD rating before it is treated as a drop-in replacement.
Can TRS3386ECDW replace MAX3386EIDW?
The TRS3386ECDW is a candidate replacement because it shares the three-driver, two-receiver RS-232 function and split-supply architecture of the MAX3386EIDW. It should be treated as drop-in only after its 20-SOIC pinout, logic-side supply limits, electrical characteristics, and ESD qualifications match the original design.
Is MAX3386EIPW the same as MAX3386EIDW?
The MAX3386EIPW and MAX3386EIDW are ordering variants in the MAX3386E family, but their exact temperature-grade, marking, and commercial differences must be checked in the manufacturer ordering information. Before substitution, verify that the package, pinout, electrical limits, and qualification requirements of the specific suffix remain acceptable for the application.
MAX3386EIDW vs TRS3386ECDW: which is better for an industrial RS-232 link?
Choose the MAX3386EIDW only when maintaining an existing qualified design is more important than lifecycle continuity. Consider the TRS3386ECDW when current sourcing matters, provided its complete pinout, supply limits, ESD ratings, and temperature range match the original circuit; the available comparison identifies the same 3/2 and split-supply architecture but does not establish every parameter.
When should I choose MAX3386EIDW over another RS-232 transceiver?
Choose MAX3386EIDW when an existing board already depends on its exact 20-SOIC pinout, three-driver and two-receiver arrangement, split VL supply, and specified protection behavior. For new production, favor a current, non-obsolete device unless lifecycle continuity and drop-in qualification justify retaining the original design.
What are the key specifications of MAX3386EIDW that engineers should know?
The principal engineering facts are a 3/2 RS-232 configuration, three drivers, two receivers, a split VL supply pin, ±25 kV enhanced ESD protection on RIN and DOUT, and a 20-SOIC package measuring 0.295 inch or 7.50 mm in body width. The manufacturer datasheet remains the controlling source for voltage limits, timing, and environmental ratings.

エンジニアリング参考データ: MAX3386EIDW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Select the MAX3386EIDW when maintaining a qualified 20-SOIC board is more important than obtaining a current lifecycle part. Its three drivers, two receivers, split VL logic-side supply, and enhanced ±25 kV ESD protection make it suitable for legacy industrial, instrumentation, and embedded RS-232 interfaces. Consider MAX3386EIPW first among same-brand options, but verify the ordering-grade difference and pin-level electrical limits. Consider TRS3386ECDW when the same 3/2 split-supply architecture is desired and a qualified second source is more important; its listed HBM ESD rating is lower than the target rating, and not every parameter is confirmed. For a new design without an existing footprint, prefer a current transceiver after checking supply voltage, logic levels, channel count, package, and ESD requirements.

代替品との比較

パラメータ この製品 MAX3386EIPW TRS3386ECDW
Package 20-SOIC (0.295 inch, 7.50 mm width) 20-SOIC 20-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Split Logic-Side Supply Yes Yes Yes
RS-232 Interface Full-duplex RS-232 transceiver RS-232 transceiver RS-232 interface device

主な差別化要因

  • Retains a complete three-driver and two-receiver interface (vs TRS3386ECDW)
  • Split logic-side supply supports mixed-voltage interfaces (vs MAX3386EIPW)
  • Existing-design continuity (vs TRS3386ECDW)

設計ノート

Route the three driver outputs and two receiver inputs according to the manufacturer application circuit, keeping the RIN and DOUT nets short and away from clock-sensitive or analog nodes. The split VL supply is a functional feature rather than a substitute for normal power-rail design; connect the logic-side bypass capacitor at its supply pin and maintain continuous ground reference under all RS-232 line states.

Do not treat a matching 20-SOIC footprint as proof of interchangeability. Confirm pin-by-pin function, supply pin voltage limits, logic thresholds, driver output levels, receiver thresholds, temperature range, and ESD test method for every replacement. Pay particular attention to the split VL connection because a functional substitute that combines or relocates a supply pin can prevent startup or damage the host circuit.

RS-232 driver edges can couple into nearby circuitry even when the logic side is quiet. Keep the cable-side nets away from sensitive inputs, use a continuous ground plane where practical, minimize loop area, and avoid placing high-speed digital clocks parallel to the unprotected side of the transceiver. Apply the manufacturer ESD and decoupling guidance at externally accessible connectors rather than adding undocumented protection networks to active driver outputs.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component is listed as ROHS3 compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is established by the available records.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3386EIDW MAX3386EIDW datasheet MAX3386EIDW datasheet pdf MAX3386EIDW pinout MAX3386EIDW schematic MAX3386EIDW equivalent MAX3386EIDW replacement MAX3386EIDW cross reference MAX3386EIDW vs TRS3386ECDW MAX3386EIDW footprint MAX3386EIDW price MAX3386EIDW stock Texas Instruments MAX3386EIDW MAX3386EIDW 20-SOIC pinout MAX3386EIDW RS-232 application circuit

関連部品&用語

Texas Instruments MAX3386EIDW MAX3386E MAX3386EIPW TRS3386ECDW RS-232 transceiver RS-232 interface line driver line receiver mixed-voltage system split VL supply enhanced ESD protection RIN input DOUT output 20-SOIC SOIC package surface-mount semiconductor industrial control point-of-sale equipment test and measurement embedded systems serial adapter RS-232 port logic-side supply voltage
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示