MAX3386EIDW - 3/2 RS-232 Transceiver | Texas Instruments
MPN: MAX3386EIDW ✗ اختتامِ زندگیMAX3386EIDW جائزہ
An RS-232 transceiver is an interface IC that bridges a digital logic system and an RS-232 serial link. In the transmit direction, drivers convert logic-level signals into RS-232 levels; in the receive direction, receivers convert RS-232 inputs into compatible logic levels. The MAX3386E belongs to the interface IC hierarchy and supports bidirectional serial connectivity between embedded equipment and external data ports.
The MAX3386EIDW provides three transmit drivers and two receive inputs, allowing one logic-side connection to serve multiple RS-232 lines. Its split VL supply arrangement supports mixed-voltage logic systems by allowing the logic-side supply to be selected independently from the transceiver’s other supply connections. Enhanced input and output ESD protection improves robustness against electrostatic discharge encountered during normal handling, cable connection, and industrial environments.
The MAX3386EIDW is identified in the manufacturer documentation as the MAX3386E RS-232 transceiver with split supply pin for logic side. It is offered in a 20-SOIC package measuring 0.295 inches, or 7.50 mm, in body width. The E suffix denotes enhanced ESD protection, while the exact operating-temperature grade and ordering suffix details should be confirmed in the manufacturer datasheet before production release.
Typical uses include industrial control links, point-of-sale equipment, serial adapters, instrumentation, and embedded systems that exchange data through RS-232 ports. The three-driver and two-receiver arrangement can support multiple signal directions on one board, while the split logic-side supply can simplify interfacing with modern low-voltage processors. Any replacement must preserve the exact pinout, supply arrangement, logic levels, and ESD requirements of the original PCB.
For PCB design, keep RS-232 driver and receiver routes away from sensitive analog signals, use a solid ground reference, and place protection and bypass components close to their associated pins. Because this part is listed as obsolete by one distributor, new production designs should confirm lifecycle status and obtain an approved source before committing to a long-term bill of materials.
This page combines lifecycle and package information, verified pricing treatment, drop-in replacement evaluation, and practical design guidance to support faster component selection and board-level risk assessment.
کے لیے ڈراپ اِن متبادل MAX3386EIDW — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3386EIDW (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Driver Count, ESD Protection, Lifecycle Status, Logic-Side Supply.
MAX3386EIPW
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TRS3386ECDW
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX3386EIDW تفصیلات
| Product Type | RS-232 transceiver |
| Transceiver Configuration | 3 drivers / 2 receivers |
| Driver Count | 3 |
| Receiver Count | 2 |
| Logic-Side Supply Arrangement | Split VL supply pin |
| Enhanced ESD Protection | ±25 kV |
| ESD-Protected Inputs | RIN inputs |
| ESD-Protected Outputs | DOUT outputs |
| پیکیج | 20-SOIC (0.295 inch, 7.50 mm width) |
| ماؤنٹنگ ٹائپ | Surface mount |
| RoHS اسٹیٹس | ROHS3 compliant |
| لائف سائیکل کی حالت | Obsolete |
MAX3386EIDW 20-soic (0.295 inch, 7.50 mm width) پن کنفیگریشن گائیڈ
MAX3386EIDW (20-soic (0.295 inch, 7.50 mm width) پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3386EIDW.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MAX3386EIDW کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Serial Control, Point-of-Sale Terminal Interface, Serial Adapter and Dongle, Test and Measurement Equipment, Embedded Equipment Communication, Legacy Data Port Retrofit.
Industrial Serial Control
The MAX3386EIDW fits industrial control equipment that must connect a low-voltage controller to legacy RS-232 equipment through three outbound and two inbound lines. Its split VL supply pin allows the logic side to be separated from the other supply connections, which is useful when the host controller does not operate at the same voltage as the complete interface circuit. The 3/2 arrangement concentrates several RS-232 signals in one 20-SOIC device, while ±25 kV enhanced ESD protection on RIN and DOUT adds protection at externally accessible interfaces. The designer should still verify logic thresholds, supply limits, and the complete application circuit in the manufacturer datasheet before layout release.
تجویز کردہ
Point-of-Sale Terminal Interface
The MAX3386EIDW can connect point-of-sale peripherals that retain RS-232 communication ports while the main terminal logic operates at a lower voltage. Three drivers support several outbound commands or status signals, while two receivers provide inbound peripheral responses. The split VL supply pin is particularly relevant when the logic side and interface circuitry use different supply levels. Its enhanced ±25 kV ESD protection on RIN inputs and DOUT outputs helps withstand electrostatic discharge at externally connected lines. Before adoption, confirm the operating-temperature grade, supply tolerances, and signal-level compatibility against the peripheral interface specification.
تجویز کردہ
Serial Adapter and Dongle
The MAX3386EIDW is suitable for compact serial adapters and legacy communication dongles that translate host logic into RS-232 levels. Its three transmitters and two receivers support several control and data lines without requiring three separate transceiver packages. The 20-SOIC format simplifies assembly relative to larger through-hole interfaces, and the split logic-side supply can ease connection to compatible 3.3 V or other mixed-voltage host logic when the device limits permit it. The designer must maintain a low-impedance ground connection, keep cable-side routing separated from sensitive logic, and verify the complete electrical limits before production.
تجویز کردہ
Test and Measurement Equipment
The MAX3386EIDW can bridge laboratory instrument control logic with external RS-232 equipment through its three transmitters and two receivers. The split VL supply arrangement supports systems in which the instrument controller uses a distinct logic voltage, while the enhanced ESD protection on receiver inputs and driver outputs improves robustness around user-accessible cable connections. Its multiple channels reduce the number of discrete line interfaces required on an instrument main board. However, because the target is listed as obsolete, new instrument platforms should evaluate a current transceiver unless preserving an existing chassis or board architecture makes a qualified drop-in replacement more practical.
تجویز کردہ
Embedded Equipment Communication
The MAX3386EIDW supports embedded systems that retain an RS-232 service or configuration port while using a modern processor or programmable logic device on the logic side. Three driver outputs can carry command, enable, or status lines, and two receiver inputs can return acknowledgements or remote signals. The split VL pin helps isolate the host-side voltage requirement from other supply connections. In a compact embedded assembly, the 20-SOIC package also offers a practical pin count for three transmit and two receive functions. The board designer should account for RS-232 level translation on the cable side and use the manufacturer reference circuit for supply bypassing and logic-side connections.
تجویز کردہ
Legacy Data Port Retrofit
The MAX3386EIDW is useful when an existing RS-232 data port must be retained during a system retrofit but the replacement controller has different logic-side requirements. The split supply pin allows a mixed-voltage interface arrangement, while the three-driver and two-receiver organization preserves several legacy port signals in a single device. The 20-SOIC footprint can assist with board-reuse planning, although a footprint match alone does not establish electrical compatibility. Before installing the part, compare every power pin, driver output, receiver input, and ground connection in the original datasheet, and confirm that the source and target equipment do not require automatic-power or ground-signaling behavior.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3386EIDW — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX3386EIPW | TRS3386ECDW |
|---|---|---|---|
| Package | 20-SOIC (0.295 inch, 7.50 mm width) | 20-SOIC | 20-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Split Logic-Side Supply | Yes | Yes | Yes |
| RS-232 Interface | Full-duplex RS-232 transceiver | RS-232 transceiver | RS-232 interface device |
اہم امتیازی خصوصیات
- Retains a complete three-driver and two-receiver interface (بمقابلہTRS3386ECDW)
- Split logic-side supply supports mixed-voltage interfaces (بمقابلہMAX3386EIPW)
- Existing-design continuity (بمقابلہTRS3386ECDW)
ڈیزائن نوٹس
Route the three driver outputs and two receiver inputs according to the manufacturer application circuit, keeping the RIN and DOUT nets short and away from clock-sensitive or analog nodes. The split VL supply is a functional feature rather than a substitute for normal power-rail design; connect the logic-side bypass capacitor at its supply pin and maintain continuous ground reference under all RS-232 line states.
Do not treat a matching 20-SOIC footprint as proof of interchangeability. Confirm pin-by-pin function, supply pin voltage limits, logic thresholds, driver output levels, receiver thresholds, temperature range, and ESD test method for every replacement. Pay particular attention to the split VL connection because a functional substitute that combines or relocates a supply pin can prevent startup or damage the host circuit.
RS-232 driver edges can couple into nearby circuitry even when the logic side is quiet. Keep the cable-side nets away from sensitive inputs, use a continuous ground plane where practical, minimize loop area, and avoid placing high-speed digital clocks parallel to the unprotected side of the transceiver. Apply the manufacturer ESD and decoupling guidance at externally accessible connectors rather than adding undocumented protection networks to active driver outputs.
تعمیل کی معلومات
The component is listed as ROHS3 compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is established by the available records.