Analog Devices

MAX358EPE+ - 8:1 Fault-Protected Analog Multiplexer | Analog Devices

部品番号: MAX358EPE+ ✓ 生産中
10 µA Id 1.8 kOhm Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX358EPE+ 概要

The Analog Devices MAX358EPE+ is a fault-protected, single-ended 8:1 analog multiplexer with 1.8 kOhm on-resistance in a 16-pin PDIP package. It routes one of eight input channels to a common output while providing fault protection, power-off isolation, and an operating temperature range of -40°C to +85°C. The device is intended for systems where an input may experience voltage excursions beyond the normal supply rails.

An analog multiplexer is an interface IC that connects multiple signal sources to one processing channel. The MAX358 family uses this switching architecture to reduce the number of converters, sensor inputs, or control lines required by a measurement system. In the hierarchy of semiconductor devices, it is an analog switch IC, an interface IC, and ultimately a discrete analog function rather than a digital logic component.

The MAX358EPE+ provides eight single-ended channels, 1.8 kOhm on-resistance, and fault protection covering ±35 V beyond the supply rails. Power-off isolation prevents connected sources from being significantly influenced when the device is unpowered. These characteristics make the multiplexer useful for data acquisition, industrial control, test equipment, and instrumentation where signal routing and input protection must coexist in a compact package.

The 16-pin PDIP construction supports through-hole assembly and straightforward inspection or rework on suitable boards. The MAX358 family is identified by Analog Devices as a production product. Circuit designers should still verify signal amplitude, supply voltage, leakage, switching timing, and channel capacitance against their exact system requirements before finalizing the PCB and input-protection network.

Typical uses include multiplexed sensor acquisition, programmable instrumentation, industrial control interfaces, automated test equipment, and data-logging modules. In these applications, the common output can be connected to an ADC or measurement front end while the address and enable controls select the required channel. Care is required when switching high-impedance sources because off leakage, charge injection, and settling time influence measurement accuracy.

A practical design priority is to preserve the mux's fault-protection capability rather than placing unrestricted external voltages directly on every input. Confirm the absolute maximum conditions and ensure that control logic, supply sequencing, and external clamping are compatible with the selected operating state. This page also consolidates practical selection guidance, verified alternatives, and design considerations for engineers evaluating the MAX358EPE+.

ドロップイン代替品: MAX358EPE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX358EPE+ (同一形状・フットプリント) — 相違点: Halogen-Free Status, Multiplexer Configuration, Product Type.

Texas Instruments
Halogen-Free Status: unknown
Multiplexer Configuration: 8:1
Product Type: Single-ended analog multiplexer
比較対象 MAX358EPE+ →

MAX358CPE+

✅ ドロップイン
📦 16-pin PDIP
Same 8-channel, 16-pin DIP fault-protected family; temperature-grade differences must be confirmed in the ordering information

📋 参考代替品(カタログ未掲載)

MAX358EPE

✅ ドロップイン
📦 16-pin PDIP
Same 8:1, 1.8 kOhm, 16-pin DIP configuration; the ordering-suffix temperature qualification differs

📋 参考代替品(カタログ未掲載)

DG458DJ

✅ ドロップイン
📦 16-pin PDIP
Cross-reference alternative with a reported maximum off-leakage current of 10 µA; channel and timing deltas require data-sheet verification

📋 参考代替品(カタログ未掲載)

MPC508AP

✅ ドロップイン
Texas Instruments
📦 16-pin PDIP
Single-ended analog multiplexer · 8 channels · 8:1 · 1 circuit · 16 V · ±15 V · 70 Vpp · Break-before-make

価格はお問い合わせください

データシートを見る →

MAX358EPE+ 仕様

Product Type Fault-protected analog multiplexer
Multiplexer Configuration Single-ended, 8:1
Number of Channels 8 channels
On-Resistance 1.8 kOhm
Number of Circuits 1 circuit
パッケージ 16-pin PDIP
実装タイプ Through-hole
動作温度範囲 -40°C to +85°C
Fault Protection Protected to ±35 V beyond the supply rails
Power-Off Isolation Supported
Off Leakage Current, IS(off), Maximum 10 µA
Halogen-Free Status Compliant

MAX358EPE+ 16-pin pdip ピン配置ガイド

MAX358EPE+ (16-pin pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX358EPE+ の 16-pin pdip パッケージピン配置図

詳細なピン配置データはありません: MAX358EPE+.

詳細は データシート をご参照ください。

主な用途

MAX358EPE+ の用途: 6 件s: Industrial Sensor Acquisition, Programmable Test Equipment, Data Logging Modules, Measurement Front Ends, Communications Equipment, Audio Measurement Systems.

🏭

Industrial Sensor Acquisition

The MAX358EPE+ fits multiplexed industrial sensor acquisition because it routes eight single-ended analog inputs to one common measurement path in a 16-pin PDIP package. Its -40°C to +85°C operating range supports demanding factory environments, while fault protection to ±35 V beyond the supply rails adds resilience when sensor wiring is exposed to electrical transients. The 1.8 kOhm on-resistance should be evaluated against sensor impedance, ADC input capacitance, acquisition time, and leakage requirements.

🔧

Programmable Test Equipment

The MAX358EPE+ is useful in programmable test equipment where multiple analog sources must be connected selectively to a common measurement instrument. Its 8:1 configuration reduces the number of external routing switches, and the fault-protected inputs can tolerate excursions beyond the normal supply rails during automated testing. The 1.8 kOhm on-resistance and 10 µA maximum reported off leakage are important when configuring high-impedance sources and low-level measurements.

🧩

Data Logging Modules

The MAX358EPE+ can consolidate eight analog sensor channels in a compact data-logging module while retaining fault protection and power-off isolation. The single-ended 8:1 architecture is appropriate for systems that periodically sample temperature, pressure, potentiometer, or resistive-sensor outputs through a shared ADC channel. Designers should confirm settling behavior and charge injection against the required sample rate, and use source impedances that interact safely with the 1.8 kOhm on-resistance.

📟

Measurement Front Ends

The MAX358EPE+ suits measurement front ends that require several externally selected inputs feeding a shared amplifier, filter, or ADC. Its single-ended 8:1 arrangement simplifies source selection, while the PDIP package makes through-hole assembly and board-level inspection practical. Fault protection and power-off isolation are valuable when test points can be driven by external equipment, although the exact ±35 V beyond-rail condition and supply limits must be respected in the system design.

🌐

Communications Equipment

The MAX358EPE+ can route monitored or injected analog signals within communications equipment where multiple lines must be selected without adding a separate multiplexer for each function. Fault protection helps manage accidental voltage excursions on externally connected lines, while the -40°C to +85°C rating supports industrial communications equipment. The design must verify logic thresholds, switching transients, leakage, and supply sequencing to preserve signal integrity across the selected channel.

🎧

Audio Measurement Systems

The MAX358EPE+ can be evaluated for multichannel audio measurement systems that require fault-tolerant routing of several single-ended inputs to a common analysis path. The eight-channel architecture reduces wiring complexity, while the 1.8 kOhm on-resistance may be acceptable for medium- or high-impedance audio sources. For precision audio measurement, verify off leakage, channel isolation, crosstalk, charge injection, and switching noise against the required signal-to-noise performance.

What is MAX358EPE+ used for?
The MAX358EPE+ is a fault-protected, single-ended 8:1 analog multiplexer used to route one of eight input signals to a common output. It has 1.8 kOhm on-resistance and comes in a 16-pin PDIP package. According to the Analog Devices MAX358 product page, the MAX358 family is a production product, making it appropriate for instrumentation, industrial measurement, test systems, and protected signal-routing designs.
How many channels does MAX358EPE+ have?
The MAX358EPE+ has eight channels in a 1-circuit, single-ended 8:1 configuration. Its listed on-resistance is 1.8 kOhm, and the device is packaged in a 16-pin PDIP. The Analog Devices MAX358 product page identifies the product as a fault-protected analog multiplexer, while distributor technical listings describe the same 8:1 configuration and package arrangement.
What fault protection does MAX358EPE+ provide?
The MAX358EPE+ provides fault protection for signals driven to ±35 V beyond the device supply rails. This protection allows the multiplexer to tolerate overvoltage conditions that might otherwise damage an unprotected analog input. The fault-protected architecture, together with power-off isolation, is central to using the MAX358 family in industrial and test systems where accidental input excursions are possible.
What is the operating temperature range of MAX358EPE+?
The MAX358EPE+ is specified for operation from -40°C to +85°C. This extended industrial temperature range supports use in temperature-controlled factories, outdoor instrumentation, and laboratory equipment. The distributor specification identifies the range as -40°C to +85°C, while the Analog Devices product page identifies the MAX358 family as a production product.
Where can I download the MAX358EPE+ datasheet PDF?
The official MAX358EPE+ datasheet and product documentation are available through the Analog Devices MAX358 product page at https://www.analog.com/en/products/max358.html. Select the MAX358 data sheet from the product documentation resources. The Analog Devices page is the preferred source for the device description, family data sheet, ordering information, and supporting technical material.
Where is the MAX358EPE+ pinout located?
The MAX358EPE+ pin configuration is shown in the pin-description section of the manufacturer MAX358 data sheet linked from the Analog Devices MAX358 product page. Use that diagram to map the eight inputs, common output, address and enable controls, supply pins, and ground before assigning PCB tracks. The component uses a 16-pin PDIP footprint with standard through-hole pin numbering.
What is the best drop-in replacement for MAX358EPE+?
The closest documented replacements include MAX358CPE+, MAX358EPE, DG458DJ, and MPC508AP, but each should be checked for electrical and pin compatibility before substitution. The MAX358CPE+ remains in the same 16-pin DIP family with an 8-channel fault-protected multiplexer. DG458DJ and MPC508AP are listed as alternative parts in the MAX358EPE cross-reference record, including a maximum off-leakage figure of 10 µA.
Can DG458DJ replace MAX358EPE+?
DG458DJ is listed as an alternative to MAX358EPE+ and is a candidate for evaluation, but it should not be treated as an automatic drop-in replacement without checking its pinout and ratings. The cross-reference record associates the MAX358 family with a maximum off-leakage current of 10 µA and identifies DG458DJ as an alternative part. Verify channel count, on-resistance, supply range, address logic, fault limits, and package dimensions.
Can MPC508AP replace MAX358EPE+?
MPC508AP is listed as an alternative to MAX358EPE+ and may serve as a replacement candidate after a detailed compatibility review. Confirm that its channel arrangement, control logic, electrical ratings, fault-protection behavior, and 16-pin package geometry match the MAX358EPE+ design. The cross-reference record does not establish identical performance for every parameter, so substitution must be based on the complete manufacturer data sheets.
Is MAX358EPE+ suitable for industrial sensor acquisition?
The MAX358EPE+ is suitable for industrial sensor acquisition when its -40°C to +85°C rating and fault-protection capability address the application. Its 8:1 configuration can consolidate eight analog inputs onto one measurement channel, while 1.8 kOhm on-resistance should be checked against the sensor impedance and ADC input architecture. Add appropriate external protection and validate settling behavior at the intended signal bandwidth.
Is MAX358EPE+ suitable for a test and measurement system?
The MAX358EPE+ is suitable for many test and measurement signal-routing applications because it combines eight single-ended inputs, fault protection, power-off isolation, and a through-hole PDIP package. Its 1.8 kOhm on-resistance can affect source impedance, while off leakage and switching transients can influence high-impedance measurements. Verify accuracy limits against the front-end architecture before production release.
When should I choose MAX358EPE+ over MAX358CPE+?
Choose MAX358EPE+ when the system requires the -40°C to +85°C operating range identified for the MAX358EPE+ and requires a 16-pin PDIP assembly. MAX358CPE+ is a closely related 16-pin DIP fault-protected multiplexer in the same family, so the choice should be based on its exact temperature grade, electrical ratings, and ordering suffix. Both remain valid for many industrial acquisition designs.
MAX358EPE+ vs MAX358CPE+ - which is better for industrial use?
The MAX358EPE+ is the stronger selection when the stated -40°C to +85°C operating range is mandatory for industrial deployment. MAX358CPE+ provides a similarly packaged, 8-channel fault-protected DIP alternative and may suit less demanding temperature requirements. The deciding factors are the exact temperature grade, verified channel specifications, supply range, control interface, lifecycle status, and qualification requirements.
What can replace MAX358EPE+?
MAX358CPE+, MAX358EPE, DG458DJ, and MPC508AP are documented candidates to evaluate when replacing MAX358EPE+. MAX358CPE+ and MAX358EPE are same-family choices, while DG458DJ and MPC508AP appear in an external cross-reference list. No candidate should be installed without comparing the pin assignments, supply limits, on-resistance, leakage, switching characteristics, and fault-protection requirements.
Where can I get a quote or current lead time for MAX358EPE+?
Use the Request a Quote form on this page to request current commercial availability, lead time, and order quantities for MAX358EPE+. The manufacturer lists the MAX358 family as a production product, and distributor listings indicate market availability. Quote requests allow the exact 16-pin PDIP ordering code and required quantity to be checked without relying on a stale static price.
What are the key specifications of MAX358EPE+ engineers should know?
The key MAX358EPE+ specifications are an 8:1 single-ended configuration, eight channels, 1.8 kOhm on-resistance, fault protection to ±35 V beyond the supply rails, power-off isolation, a -40°C to +85°C operating range, and a 16-pin PDIP package. The family is listed as production. Maximum off-leakage current is reported as 10 µA, while timing, capacitance, isolation, and supply limits should be checked in the manufacturer data sheet.

エンジニアリング参考データ: MAX358EPE+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX358EPE+ for an eight-channel, single-ended analog routing design that requires a 16-pin PDIP, fault protection beyond the supply rails, power-off isolation, and operation from -40°C to +85°C. MAX358CPE+ is the closest same-family alternative and should be selected when its exact temperature grade and ordering suffix better match the production requirements. MAX358EPE offers the same listed 8:1 and 1.8 kOhm configuration but requires review of the ordering-suffix qualification. DG458DJ and MPC508AP are useful cross-reference candidates for supply-risk mitigation, but each requires direct comparison of pin assignments, on-resistance, leakage, switching timing, supply limits, and fault-protection behavior. Do not substitute on package appearance alone; a 16-pin footprint does not guarantee identical control logic or channel mapping.

代替品との比較

パラメータ この製品 MAX358CPE+ MAX358EPE DG458DJ MPC508AP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Microchip Technology
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP

主な差別化要因

  • Extended-temperature 8:1 multiplexing (vs MAX358CPE+)
  • Established fault-protected interface architecture (vs MPC508AP)
  • Single-family electrical configuration (vs DG458DJ)

設計ノート

Treat fault protection and absolute-maximum ratings as separate constraints. The documented ±35 V beyond-rail protection does not permit unrestricted input voltage under every power, temperature, and switching condition. Confirm the supply range, input limits, and enabled or disabled behavior in the manufacturer data sheet, and ensure external fault energy is limited so that input protection does not become the primary energy-absorption component.

Account for the 1.8 kOhm on-resistance when the source impedance is high. The switch resistance combines with the source, amplifier input, and ADC input capacitance to determine the settling time of a channel transition. Estimate the maximum source impedance against the required acquisition time, and confirm that leakage of up to 10 µA does not create an unacceptable error at the signal node.

Use the manufacturer pin-description table when assigning the 16-pin PDIP footprint. Keep analog input traces away from address and enable switching nodes, provide a direct ground return for the multiplexer, and place input filtering or clamping close to externally accessible pins. The fault-protection structure should not be used as a substitute for properly rated external protection when cables or test fixtures can introduce large transients.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Yes
紛争鉱物
Unknown

The cross-reference record identifies the device as halogen-free compliant. RoHS, REACH, lead-free, and conflict-minerals status are not established by the available manufacturer and distributor records.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX358EPE+ datasheet MAX358EPE+ pinout MAX358EPE+ datasheet pdf MAX358EPE+ equivalent MAX358EPE+ replacement MAX358EPE+ cross reference MAX358EPE+ vs MAX358CPE+ MAX358EPE+ price MAX358EPE+ stock Analog Devices MAX358EPE+ MAX358EPE+ 8:1 multiplexer MAX358EPE+ PDIP pinout MAX358EPE+ industrial sensor

関連部品&用語

Analog Devices MAX358EPE+ MAX358CPE+ MAX358EPE DG458DJ MPC508AP MAX358 analog multiplexer fault-protected analog multiplexer analog switch interface IC single-ended 8:1 multiplexer power-off isolation fault protection on-resistance off leakage current PDIP-16 DIP package through-hole package semiconductor industrial sensor acquisition data acquisition test and measurement ±35 V beyond-rail protection Halogen-Free
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示