Analog Devices

MAX368CWN+ - 8:1 Fault-Protected Analog Multiplexer | Analog Devices

部品番号: MAX368CWN+ ✗ 生産終了
1.8 kOhm Rds(on) 18-SOIC Package
MOQ: 1 |

MAX368CWN+ 概要

The Analog Devices MAX368CWN+ is a single-ended, fault-protected 8:1 analog multiplexer with an on-resistance of 1.8 kOhm, packaged in an 18-SOIC surface-mount package. It is designed for applications that route one of eight analog input channels to a common output while providing controlled fault isolation and latch-based operation.

An analog multiplexer is an interface IC that connects multiple signal sources to one shared input on a host circuit. The MAX368CWN+ belongs to the broader multiplexer and demultiplexer hierarchy, where a multiplexer selects among several inputs and a demultiplexer directs one input toward multiple outputs. Its single-ended architecture, 8:1 configuration, and 1.8 kOhm on-resistance make it relevant to compact analog signal-routing systems rather than high-voltage power switching.

The principal documented features include an 8:1 single circuit configuration, 1.8 kOhm on-resistance, and an 18-SOIC package. The MAX368 family is identified as a fault-protected analog multiplexer with latch, allowing a system to place a selected channel into a held state during control or fault-management sequences. Its surface-mount construction supports compact PCB layouts while preserving leaded-component handling characteristics associated with the SOIC form factor.

Technically, the device uses separate selection and enable controls to route one of eight channels to the common output. Because it is intended for analog signals, channel resistance and leakage behavior are important considerations when the source impedance is high. The 1.8 kOhm specification should be compared with the input impedance of the receiving amplifier, ADC, or instrumentation circuit; otherwise, source-loading errors can reduce signal amplitude and disturb the expected transfer function.

Typical uses include sensor-channel selection, test and measurement signal routing, data-acquisition systems, industrial control interfaces, and communication equipment that must connect several low-frequency analog sources to a shared processing channel. The surface-mount 18-SOIC package can also simplify board-level replacement of the non-tape-and-reel MAX368CWN ordering code when the electrical configuration and operating requirements are identical.

PCB design should keep selected and unselected analog paths short, provide a solid ground reference, and isolate sensitive routing from switching or digital clock signals. Because the available device data does not publish a complete pin-description table, engineers should use the manufacturer’s MAX368 datasheet when assigning every physical pin and confirming control polarity, fault behavior, and absolute maximum ratings.

This page combines the verified product identity, package information, ordering-code distinctions, procurement availability, and replacement analysis with practical guidance for selecting and implementing this multiplexer. It is intended to help engineers distinguish the MAX368CWN+ from related MAX368 ordering codes and determine whether a proposed replacement preserves the required 8:1, single-ended, 18-SOIC configuration.

ドロップイン代替品: MAX368CWN+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

MAX368EWN+

✅ ドロップイン
📦 18-SOIC
Alternate MAX368 ordering code with the same 8:1, single-ended, 18-SOIC configuration; ordering-code and temperature-grade details should be checked against the manufacturer datasheet.

📋 参考代替品(カタログ未掲載)

MAX368EWN-T

✅ ドロップイン
📦 18-SOIC
Related MAX368 ordering code with consistent 8:1, single-ended, 18-SOIC construction; the -T ordering and operating grade differ from the target ordering code.

📋 参考代替品(カタログ未掲載)

MAX368CWN+ 仕様

Product Type Single-ended analog multiplexer
Multiplexer Configuration 8:1
Number of Circuits 1 circuit
On-Resistance 1.8 kOhm
Signal Architecture Single-ended
Fault Protection Fault-protected
Latch Function Yes
パッケージ 18-SOIC
Package Width 7.50 mm
実装タイプ Surface mount
Temperature Grade Commercial
Number of Terminals 16 terminals
Package Code SOP
Package Shape Rectangular
Analog Input Channels 8 channels
Common Output Channels 1 channel

MAX368CWN+ rectangular ピン配置ガイド

MAX368CWN+ (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX368CWN+ の rectangular パッケージピン配置図

詳細なピン配置データはありません: MAX368CWN+.

詳細は データシート をご参照ください。

主な用途

MAX368CWN+ の用途: 6 件s: Multichannel Sensor Acquisition, Data Acquisition Signal Routing, Industrial Control Signal Multiplexing, Test and Measurement Switching, Communication Equipment Analog Routing, Instrumentation and Diagnostic Multiplexing.

🧩

Multichannel Sensor Acquisition

MAX368CWN+ is useful when several sensor outputs must feed one amplifier or analog-to-digital converter. Its 8:1 configuration reduces the number of downstream analog inputs, while the 1.8 kOhm on-resistance must be included in the source-impedance calculation. For resistive dividers, sensor outputs, or current-mode sources, verify that the selected channel does not create unacceptable attenuation. Place the multiplexer close to the sensors and acquisition converter, keep the common output path short, and provide a stable ground reference. The single-ended architecture is appropriate when the sensors share a common reference and their signals remain within the electrical limits of the MAX368 family.

📊

Data Acquisition Signal Routing

The MAX368CWN+ can route one of eight analog channels to a shared data-acquisition input, simplifying board routing when the system does not require simultaneous sampling of all channels. The 1.8 kOhm channel resistance should be compared with the source impedance and ADC sampling characteristics to estimate the acquisition error. Because the device is an 8:1 single-ended multiplexer rather than a simultaneous-sampling ADC, the selected source must remain stable during conversion. Short traces, careful grounding, and isolation from digital control signals are essential for preserving measurement accuracy, especially when high-impedance sensors drive the multiplexed inputs.

🏭

Industrial Control Signal Multiplexing

MAX368CWN+ fits compact industrial control boards that must select among multiple analog command, feedback, or sensor signals. Its 8:1, single-ended configuration allows one analog processing chain to serve several system channels, reducing component count and PCB area. The commercial-temperature ordering code must be checked against the enclosure temperature and nearby heat sources. Designers should also account for the 1.8 kOhm on-resistance, confirm that control transitions do not create unacceptable settling time, and follow the fault-protection and latch behavior defined by the manufacturer before using the device in safety-related control paths.

🔧

Test and Measurement Switching

In a test or measurement system, MAX368CWN+ can connect several test points to a shared measurement amplifier or instrument input. The 8:1 selection supports repeatable routing of control voltages, sensor outputs, or diagnostic nodes while preserving a compact 18-SOIC footprint. Measurement accuracy depends on source impedance, channel resistance, leakage, switching behavior, and the acquisition timing, so those characteristics must be evaluated together. For low-level signals, use guarded grounding and minimize trace length; for higher-bandwidth signals, verify the complete signal path because the published product information does not specify operating bandwidth.

🌐

Communication Equipment Analog Routing

MAX368CWN+ can serve as an analog routing element in communication equipment that monitors or conditions several related low-frequency signal sources. Its single-ended 8:1 arrangement is appropriate when channels share a common reference and can be selected sequentially. The 1.8 kOhm on-resistance may be acceptable for impedance-tolerant signal paths but can attenuate high-impedance sources, so amplifier input impedance and source loading must be checked. Control traces should not run parallel to sensitive analog lines, and the common output should be routed directly toward the receiving circuitry to minimize added noise and coupling.

📡

Instrumentation and Diagnostic Multiplexing

The MAX368CWN+ supports instrumentation boards that route diagnostic, feedback, or calibration voltages into a common measurement channel. Eight-to-one selection reduces the number of analog switches and input stages needed when each source can be measured sequentially. Designers should not infer simultaneous sampling, isolation bandwidth, or precision from the multiplexer configuration alone. Confirm the on-resistance variation, leakage, control timing, and fault behavior in the MAX368 manufacturer datasheet. A quiet ground plane and short analog traces are especially important when the selected signal is small relative to the system’s full-scale measurement range.

おすすめ製品の概要

MAX368EWN+ Pin- and package-consistent MAX368 ordering option 使用用途: Multichannel Sensor Acquisition, Data Acquisition Signal Routing, Industrial Control Signal Multiplexing, Test and Measurement Switching, Communication Equipment Analog Routing, Instrumentation and Diagnostic Multiplexing MAX368EWN-T Related MAX368 ordering option 使用用途: Multichannel Sensor Acquisition, Industrial Control Signal Multiplexing, Communication Equipment Analog Routing, Instrumentation and Diagnostic Multiplexing MAX368CWN Non-plus MAX368 ordering code 使用用途: Data Acquisition Signal Routing, Test and Measurement Switching
Where can I buy MAX368CWN+ online?
The MAX368CWN+ can be requested through the “Request a Quote” form on this page. The part is identified as an Analog Devices 8:1, 1.8 kOhm, 18-SOIC analog multiplexer, and the form is the appropriate route for current commercial availability, quantity requirements, and shipment planning without relying on a static market listing.
What is the price of MAX368CWN+?
Use the “Request a Quote” form on this page for the current commercial terms for MAX368CWN+. The part is cataloged as an 18-SOIC analog multiplexer with a 1.8 kOhm on-resistance; pricing can change with quantity, delivery schedule, and market conditions, so a current quotation is more accurate than a historical catalog figure.
What is the lead time for MAX368CWN+?
Request the current lead time and minimum order quantity through the “Request a Quote” form on this page. Lead time depends on supplier inventory, order volume, and the requested delivery date, none of which should be inferred from a generic distributor result or from an archived component record.
Is MAX368CWN+ in stock?
Current stock for MAX368CWN+ should be confirmed through the “Request a Quote” form on this page. DigiKey lists the device as a purchasable analog switch or multiplexer, but a product-page listing does not guarantee a continuously available quantity for a specific order.
MAX368CWN+ vs MAX368EWN+ - which is better for an analog signal router?
MAX368CWN+ is the commercial-temperature ordering option, while MAX368EWN+ is identified by a cross-reference result as a pin- and package-consistent replacement. The documented shared configuration is an 8:1, single-ended multiplexer in an 18-SOIC package. The final choice should account for the operating-temperature grade and confirm every control and electrical limit in the manufacturer datasheet.
What is the difference between MAX368CWN+ and MAX368EWN+?
Both devices are presented as 8:1, single-ended, 18-SOIC multiplexers with consistent terminals and package characteristics. MAX368CWN+ is associated with the commercial temperature grade, while the MAX368EWN+ ordering code provides the alternate grade or ordering option. Review the manufacturer’s temperature ratings and electrical tables before treating either part as a production substitute.
When should I choose MAX368CWN+ over MAX368EWN+?
Choose MAX368CWN+ when the commercial-temperature MAX368 ordering option meets the system requirements and the required MAX368 functions and pin arrangement are unchanged. Consider MAX368EWN+ when its documented environmental rating better matches the operating conditions. The decision should follow a comparison of temperature range, supply voltage, channel resistance, leakage, control logic, and qualification needs.
When should I choose MAX368CWN+ for a data-acquisition system?
MAX368CWN+ is suitable when eight low-frequency analog channels must be routed to one shared processing input and an 18-SOIC implementation is preferred. Its 1.8 kOhm on-resistance is the primary design check: use it with the source impedance and ADC input characteristics to determine whether channel attenuation or loading is acceptable.
What can replace MAX368CWN+?
MAX368EWN+ is a documented pin- and package-consistent replacement candidate for MAX368CWN+, and MAX368EWN-T is another related ordering option identified in the MAX368 comparison results. A replacement is appropriate only after confirming the same 18-SOIC footprint, 8:1 channel arrangement, control polarity, electrical limits, fault behavior, and required temperature grade.
Where can I download the MAX368CWN+ datasheet PDF?
The MAX368CWN+ datasheet is available through the Analog Devices MAX368 documentation link on this page and through the indexed MAX368 data-sheet listing. Use the manufacturer’s document for the authoritative pin list, absolute maximum ratings, recommended operating conditions, control timing, electrical characteristics, and package drawing.
Where can I find the MAX368CWN+ pinout?
Use the pin-description table and package drawing in the Analog Devices MAX368 manufacturer datasheet to locate the MAX368CWN+ pinout. The component is housed in an 18-SOIC package, but its individual terminal names are not reproduced here because the complete manufacturer pin table was not available for verification.
What are the key specifications of MAX368CWN+ that engineers should know?
The MAX368CWN+ is an 8:1, single-ended, fault-protected analog multiplexer with latch, a 1.8 kOhm on-resistance, and an 18-SOIC package. It is a commercial-temperature, surface-mount device with one multiplexer circuit. Its primary applications are analog signal routing, sensor selection, and test or measurement interfaces.
Is MAX368CWN+ the same as MAX368EWN+?
MAX368CWN+ and MAX368EWN+ share the 8:1, single-ended, 18-SOIC configuration, and a published comparison identifies them as directly replaceable because their terminals and package are consistent. They should still be treated as distinct ordering codes until temperature grade, electrical characteristics, control logic, and lifecycle requirements are checked against the manufacturer documentation.
What Analog Devices equivalent is available for MAX368CWN+?
Analog Devices offers the MAX368EWN+ and MAX368EWN-T ordering codes as the closest documented equivalents. The published comparison states that the terminals and packages are consistent with MAX368CWN+, allowing direct replacement without PCB changes. Production use still requires validation of temperature, voltage, resistance, leakage, and fault-response limits.
How should MAX368CWN+ be used in a sensor multiplexing circuit?
Connect each sensor channel to the appropriate analog input and use the multiplexer controls to route the selected source to the shared output, which can feed an amplifier or ADC. Account for the 1.8 kOhm on-resistance when calculating source attenuation, keep sensitive analog traces short, and confirm control timing from the MAX368 manufacturer datasheet.

エンジニアリング参考データ: MAX368CWN+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX368CWN+ for a compact, commercial-temperature 8:1 single-ended analog-routing design that uses the 18-SOIC MAX368 footprint. Its 1.8 kOhm on-resistance is the central electrical check: it is most appropriate when source impedance is low enough that channel loading does not materially affect signal accuracy. MAX368EWN+ is a documented pin- and package-consistent option when its ordering-code and temperature details better fit the design. MAX368EWN-T offers another related ordering path, but the suffix-specific grade and delivery requirements should be confirmed. None of these choices changes the PCB footprint, yet production substitution still requires verification of supply limits, control timing, leakage, on-resistance behavior, and fault-response details from the manufacturer datasheet.

代替品との比較

パラメータ この製品 MAX368EWN+ MAX368EWN-T
Brand Analog Devices Analog Devices Analog Devices
Package 18-SOIC 18-SOIC 18-SOIC
Multiplexer Configuration 8:1 8:1 8:1
Number of Circuits 1 circuit 1 circuit 1 circuit
Signal Architecture Single-ended Single-ended Single-ended
Fault Protection Fault-protected Fault-protected Fault-protected
Latch Function Yes Yes Yes
Mounting Type Surface mount Surface mount Surface mount

主な差別化要因

  • Documented 8:1 single-ended routing in an 18-SOIC package (vs MAX368EWN+)
  • Commercial-temperature target ordering code (vs MAX368EWN+)
  • Fault-protected multiplexed analog interface (vs MAX368EWN-T)

設計ノート

Treat the MAX368CWN+ as a resistance-bearing analog element. With a documented on-resistance of 1.8 kOhm, a high-impedance sensor can experience meaningful attenuation when the source resistance and receiver input resistance form a divider. Calculate the expected channel gain using the actual source, multiplexer, and receiver impedances, and add margin for on-resistance variation when precision measurements are required.

Route each selected analog channel directly to its destination, and keep the common output trace short and away from digital control lines. Provide a continuous ground reference beneath the analog path, use symmetrical routing where channel matching matters, and avoid long parallel runs with switching signals. These layout practices reduce capacitive pickup and ground-current coupling that can obscure the selected channel.

Do not select a replacement solely because it has an 18-SOIC outline. Verify the 8:1 configuration, single-ended architecture, control logic, latch polarity, fault behavior, electrical ratings, and temperature grade in the manufacturer datasheet. MAX368EWN+ and MAX368EWN-T are documented as consistent alternatives, but their complete operating limits still require confirmation before production substitution.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for MAX368CWN+ in the available product information. Confirm environmental and quality compliance with Analog Devices using the appropriate MAX368 documentation.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX368CWN+ datasheet MAX368CWN+ pinout MAX368CWN+ datasheet pdf MAX368CWN+ equivalent MAX368CWN+ replacement MAX368CWN+ cross reference MAX368CWN+ vs MAX368EWN+ MAX368CWN+ footprint MAX368CWN+ 18-SOIC MAX368CWN+ 1.8 kOhm MAX368CWN+ analog multiplexer MAX368CWN+ price MAX368CWN+ stock Analog Devices MAX368CWN+ MAX368CWN+ application circuit

関連部品&用語

Analog Devices Maxim Integrated MAX368CWN+ MAX368CWN MAX368EWN+ MAX368EWN-T analog multiplexer single-ended multiplexer analog switch multiplexer and demultiplexer interface IC semiconductor 8:1 multiplexing 1.8 kOhm on-resistance fault protection latch function 18-SOIC SOIC package surface-mount technology sensor multiplexing data acquisition test and measurement industrial control communication equipment
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示