Analog Devices

MAX398CPE+ - 8:1 Precision Analog Multiplexer | Analog Devices

部品番号: MAX398CPE+ ✓ 生産中
3 V to 15 V Vdss Less than 100 ohm Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX398CPE+ 概要

The Analog Devices MAX398CPE+ is a precision, single 8:1 CMOS analog multiplexer with on-resistance below 100 ohms, channel matching within 6 ohms, and a maximum on-resistance variation of 11 ohms across the specified analog signal range. It operates from 3 V to 15 V and is packaged in a 16-pin PDIP.

An analog multiplexer is an integrated switching device that connects one common analog terminal to one of several channel terminals. In the broader semiconductor hierarchy, the MAX398 belongs to interface ICs, analog switches, multiplexers, and signal-routing semiconductors. Its 8:1 configuration allows eight analog inputs or outputs to share a common signal path, reducing component count in sample-and-hold systems, test equipment, signal routing, and embedded measurement circuits.

The principal features include an 8:1 single-channel architecture, low on-resistance below 100 ohms, channel-to-channel matching within 6 ohms, and flat operation over the specified analog signal range. The MAX398CPE+ is manufactured in CMOS and accepts a 3 V to 15 V supply. Its PDIP package is suitable for through-hole assemblies, socketed legacy equipment, prototype boards, and systems where a rugged replaceable package is preferred over a surface-mount option.

The multiplexer uses address-controlled selection to connect the common terminal to one of eight channels. Low and relatively consistent on-resistance helps limit signal attenuation as the selected channel changes, while the specified 11 ohm maximum variation supports predictable behavior across the analog range. These characteristics are particularly useful when the same acquisition or control circuitry handles multiple analog sources without redesigning the analog path for every input.

Typical uses include sample-and-hold circuits, heads-up displays, guidance and control systems, military radios, battery-operated systems, PBX and PABX equipment, and audio signal routing. The 3 V to 15 V supply range supports both modern low-voltage systems and legacy industrial or communications equipment, although the complete signal range must remain compatible with the device's operating limits.

Designers should place the multiplexer close to the source or destination of the analog signal to minimize PCB trace resistance and coupling. Address traces should be kept away from sensitive analog inputs, and unused control inputs should be driven to defined logic levels. Verify signal amplitude, supply voltage, and temperature against the manufacturer datasheet before substituting it into an existing assembly.

This page combines the manufacturer's architecture information, package and multiplexing details, application references, pin-compatible alternatives, and practical design guidance to support component selection and replacement decisions beyond a basic distributor specification listing.

ドロップイン代替品: MAX398CPE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX398CPE+ (同一形状・フットプリント) — 相違点: Mounting Type, ESD Protection, Multiplexer Configuration, On-Resistance, Supply Voltage Range.

Renesas Electronics
Mounting Type: Surface Mount / Through Hole (package dependent)
ESD Protection: > 2000 V
比較対象 MAX398CPE+ →
Analog Devices
Mounting Type: Through-hole
ESD Protection: Greater than 2000 V
Multiplexer Configuration: 4:1
比較対象 MAX398CPE+ →

MAX398CPE

✅ ドロップイン
📦 PDIP-16
Non-plus ordering designation with the same 8:1 configuration and 16-pin PDIP package; lifecycle and temperature grade must be confirmed

📋 参考代替品(カタログ未掲載)

DG408

✅ ドロップイン
Renesas Electronics
📦 PDIP-16
Single 8-channel CMOS analog multiplexer · 100 ohm · 8 ohm · 9 ohm · 15 pC · 5 nA at +85C · 1.25 mW · TTL/CMOS

価格はお問い合わせください

データシートを見る →

DG409DJ+

✅ ドロップイン
Analog Devices
📦 PDIP-16
Dual 4-channel CMOS analog multiplexer · 4:1 · 2 circuits · 4 channels · 100 ohm · 5 V to 30 V · 15 pC · Less than 5 nA at 85 C

価格はお問い合わせください

データシートを見る →

DG508A

✅ ドロップイン
📦 PDIP-16
Pin-compatible 8:1 industry-standard multiplexer with approximately 100 ohm on-resistance versus below 100 ohm for the MAX398CPE+

📋 参考代替品(カタログ未掲載)

DG509A

✅ ドロップイン
📦 PDIP-16
Pin-compatible 8:1 industry-standard multiplexer with approximately 100 ohm on-resistance versus below 100 ohm for the MAX398CPE+

📋 参考代替品(カタログ未掲載)

HI-508APZ

✅ ドロップイン
📦 PDIP-16
Commercial-temperature 16-pin PDIP replacement rated to 15 V with approximately 100 ohm on-resistance

📋 参考代替品(カタログ未掲載)

MAX398CPE+ 仕様

Multiplexer Configuration Single 8:1
Number of Channels 8 channels
On-Resistance Less than 100 ohm
On-Resistance Matching Between Channels Within 6 ohm
Maximum On-Resistance Variation Over Analog Signal Range 11 ohm
Supply Voltage Range 3 V to 15 V
Device Type 1 circuit analog multiplexer switch
Technology CMOS
Architecture Precision monolithic 8-channel analog multiplexer
パッケージ 16-pin PDIP
実装タイプ Through hole
Signal Routing 8-channel to 1-channel analog routing
RoHS ステータス Compliant

MAX398CPE+ 16-pin pdip ピン配置ガイド

MAX398CPE+ (16-pin pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX398CPE+ の 16-pin pdip パッケージピン配置図

詳細なピン配置データはありません: MAX398CPE+.

詳細は データシート をご参照ください。

主な用途

MAX398CPE+ の用途: 6 件s: Precision Sample-and-Hold Systems, Heads-Up Display Signal Routing, Guidance and Control Systems, Military Radio Interface Circuits, PBX and PABX Audio Routing, Battery-Operated Test and Measurement.

🔧

Precision Sample-and-Hold Systems

The MAX398CPE+ fits sample-and-hold front ends that must select among eight analog sources while limiting channel-dependent error. Its on-resistance below 100 ohms, matching within 6 ohms between channels, and variation of no more than 11 ohms over the specified analog range help maintain predictable attenuation after the address controls select a channel. The 8:1 architecture consolidates eight signal sources onto one common path while the 16-pin PDIP package supports through-hole construction and socketed legacy instrumentation. Designers should account for switch on-resistance in the acquisition network, establish a defined state for every address input, and verify that source impedance and signal amplitude remain compatible with the multiplexer.

📺

Heads-Up Display Signal Routing

The MAX398CPE+ can route one of eight analog signals into a heads-up display signal chain while preserving relatively consistent channel impedance. The manufacturer specifies on-resistance below 100 ohms, channel matching within 6 ohms, and no more than 11 ohms variation across the specified analog range, reducing differences caused merely by selecting different channels. Its single 8:1 organization allows address-controlled source selection without duplicating the downstream display driver. The PDIP package is useful in prototype, industrial, or legacy display assemblies where through-hole soldering and socket replacement are preferred. Layout should keep the common path away from switching nodes and provide defined logic levels to the address and enable pins.

✈️

Guidance and Control Systems

The MAX398CPE+ is suitable for multiplexing analog feedback or command signals within guidance and control equipment. A single 8:1 path reduces the number of signal lines reaching downstream processing electronics, while low on-resistance below 100 ohms helps limit insertion loss. Channel matching within 6 ohms and maximum on-resistance variation of 11 ohms provide useful consistency when the controller compares signals from different sources. The 3 V to 15 V operating range can support legacy command and control platforms as well as lower-voltage interface sections. Engineers should verify analog swing, control polarity, and temperature requirements against the datasheet, then keep the sensitive common trace short and away from address-switching return currents.

🌐

Military Radio Interface Circuits

The MAX398CPE+ can consolidate eight analog channels in a radio interface where a common path feeds sampling, conversion, or control circuitry. The precision on-resistance specification of below 100 ohms and channel matching within 6 ohms support consistent signal routing, while the 11 ohm maximum variation limits channel-dependent resistance changes. The through-hole PDIP-16 package also accommodates ruggedized legacy radio boards and maintenance assemblies where socketed or leaded components are operationally preferable. Because military applications may impose specific temperature, screening, and qualification requirements beyond the basic device rating, engineers must verify those requirements separately. Keep supply decoupling and address traces compact, and use controlled grounding to prevent switching transients from coupling into the selected channel.

📱

PBX and PABX Audio Routing

The MAX398CPE+ can route one of eight low-frequency analog paths in PBX and PABX line-interface equipment. Its 8:1 architecture is useful where multiple voice or control channels share a converter or amplifier, and the sub-100 ohm on-resistance specification helps prevent excessive attenuation at the mux interface. Matching within 6 ohms and no more than 11 ohms variation across the analog range reduce channel-to-channel impedance shifts that could affect level consistency. The 16-pin PDIP format supports legacy telephone exchange boards and field-repairable through-hole assemblies. Designers should evaluate signal level, bandwidth, crosstalk, and control timing in the complete circuit, and place the mux close to the shared downstream path to minimize trace pickup.

⚡

Battery-Operated Test and Measurement

The MAX398CPE+ supports compact test and measurement equipment that must route several low-voltage sensor outputs through one acquisition channel. Its 3 V supply capability suits battery-powered systems, and the single 8:1 configuration permits eight sources to share a common analog path without using eight separate switches. On-resistance below 100 ohms, matching within 6 ohms, and variation of no more than 11 ohms help maintain predictable signal attenuation when the selected channel changes. The PDIP-16 package is practical for leaded prototypes and serviceable assemblies. Power-conscious designs should verify actual supply current and leakage for their operating mode, use a common ground reference, and keep the selected analog trace short to reduce noise pickup and additional resistance.

おすすめ製品の概要

MAX398CPE+ Analog Devices 使用用途: Precision Sample-and-Hold Systems, Heads-Up Display Signal Routing, Guidance and Control Systems, Military Radio Interface Circuits, PBX and PABX Audio Routing, Battery-Operated Test and Measurement DG408 Renesas Electronics 使用用途: Precision Sample-and-Hold Systems, Military Radio Interface Circuits, Battery-Operated Test and Measurement DG409 Pin-compatible 8:1 routing alternative 使用用途: Precision Sample-and-Hold Systems, Military Radio Interface Circuits DG508A Pin-compatible signal-routing alternative 使用用途: Heads-Up Display Signal Routing, PBX and PABX Audio Routing DG509A Pin-compatible signal-routing alternative 使用用途: Heads-Up Display Signal Routing, PBX and PABX Audio Routing HI-508APZ Commercial-temperature pin-compatible alternative 使用用途: Guidance and Control Systems, Battery-Operated Test and Measurement
What is the MAX398CPE+?
The MAX398CPE+ is a precision, single 8:1 CMOS analog multiplexer in a 16-pin PDIP package. According to the Analog Devices MAX398 product page, it provides on-resistance below 100 ohms, channel matching within 6 ohms, and on-resistance variation of no more than 11 ohms across the specified analog signal range. It routes one common analog terminal among eight channels for signal selection, sampling, measurement, and control applications.
What are the key specifications of MAX398CPE+ that engineers should know?
The MAX398CPE+ combines a single 8:1 configuration, a 3 V to 15 V supply range, and low on-resistance below 100 ohms in a 16-pin PDIP package. According to the manufacturer product page, on-resistance is matched within 6 ohms between channels and remains flat across the specified analog signal range, with an 11 ohm maximum variation. These figures are the principal considerations when evaluating insertion loss and channel consistency.
What is the on-resistance of MAX398CPE+?
The MAX398CPE+ has an on-resistance below 100 ohms. According to the Analog Devices MAX398 product information, its on-resistance is matched within 6 ohms between channels and remains flat over the specified analog signal range, with a maximum variation of 11 ohms. These specifications help engineers estimate channel-dependent attenuation and decide whether the mux is suitable for sensitive precision analog measurements.
What supply voltage does MAX398CPE+ require?
The MAX398CPE+ operates from 3 V to 15 V. According to the manufacturer product description, this range supports low-voltage logic systems as well as legacy communications and industrial equipment. The selected supply must remain within the stated 3 V to 15 V operating interval, while any analog signal routed through the device must also satisfy the datasheet voltage and temperature limits.
Where can I download the MAX398CPE+ datasheet PDF?
The MAX398CPE+ datasheet PDF is available from the Analog Devices product-page resources and the manufacturer's data-sheet link listed on this page. Use the pin-description table, electrical characteristics, and operating information to assign address controls, validate analog signal limits, and confirm the PDIP-16 footprint before incorporating the multiplexer into a PCB or legacy assembly.
Where can I find the MAX398CPE+ pinout?
The MAX398CPE+ pinout is shown in the manufacturer datasheet for the 16-pin PDIP package. Use the pin-description table when assigning the common analog path, channel inputs, address controls, enable function, and supply connections. Before soldering or socket replacement, compare every numbered pad with the original board because a different multiplexer's control function or enable polarity may require attention.
What can replace the MAX398CPE+?
The MAX398CPE+ can be replaced by pin-compatible PDIP-16 multiplexers such as the DG408, DG409, DG508A, DG509A, and HI-508APZ after checking the complete pinout and electrical limits. Cross-reference information identifies these devices as pin-compatible with the MAX398, but replacement approval should still confirm supply voltage, on-resistance, control logic, channel configuration, operating temperature, and required qualification.
Is the MAX398CPE+ the same as the MAX398CPE?
The MAX398CPE+ and MAX398CPE refer to closely related ordering variants of the MAX398 device, with the plus designation identifying the RoHS-compliant version. Both are listed as 16-pin PDIP 8:1 multiplexers. Confirm the exact ordering code, temperature range, package marking, and lifecycle status on the manufacturer label before treating one as a substitute for the other.
What is the best Intersil equivalent for MAX398CPE+?
The Intersil HI-508APZ is identified as a commercial-temperature, 16-pin PDIP pin-compatible alternative to the MAX398CPE+ with approximately 100 ohm on-resistance and a 15 V rating. According to the replacement data, it can be considered for legacy 15 V multiplexed analog systems, but engineers should verify every pin function and operating condition before approving the substitution.
MAX398CPE+ vs DG409 - which is better for an 8:1 analog mux?
The MAX398CPE+ is preferable when precision channel matching is the main design priority, because the manufacturer specifies on-resistance matching within 6 ohms and variation of no more than 11 ohms. The DG409 is a relevant 16-pin PDIP alternative when a pin-compatible industry-standard multiplexer is needed. The final choice depends on control logic, signal limits, temperature range, availability, and qualification requirements.
When should I choose MAX398CPE+ over DG508A?
Choose the MAX398CPE+ when its published precision characteristics are important, particularly on-resistance matching within 6 ohms and no more than 11 ohms variation across the analog range. Consider the DG508A when its exact electrical ratings, control logic, and operating range better satisfy the circuit and a documented pin-compatible substitution is acceptable. Compare the datasheets rather than relying only on the shared PDIP-16 package.
Is MAX398CPE+ suitable for battery-operated systems?
Yes, MAX398CPE+ is suitable for battery-operated systems when the supply and analog signal remain within the manufacturer's operating limits. The device supports a 3 V to 15 V supply range, allowing use with low-voltage systems and legacy higher-voltage rails. Its CMOS implementation and 16-pin PDIP package also fit many portable or fielded legacy systems, although power consumption and signal leakage should be checked for the design.
Where can I buy MAX398CPE+ online?
Use the Request a Quote form on this page to request MAX398CPE+ availability, commercial terms, and current lead time. The form is the appropriate route for an exact-orderable part without relying on stale stock messages. When requesting the device, specify MAX398CPE+, the 16-pin PDIP package, required quantity, and any date-code or traceability requirements for the assembly.
What is the price of MAX398CPE+?
The current commercial terms for MAX398CPE+ are shown through the Request a Quote form on this page. Submit the exact MPN and required quantity so pricing can reflect the live order configuration and supply position. Avoid substituting a different MPN suffix or package, because MAX398 variants differ in ordering code, temperature grade, or package construction in some product families.
What is the lead time for MAX398CPE+?
The current lead time for MAX398CPE+ should be confirmed through the Request a Quote form on this page. Include the quantity, target delivery date, and whether obsolete-material inspection or traceability is acceptable. A sourcing confirmation for the exact 16-pin PDIP ordering code prevents a superficially similar MAX398 variant from being substituted without engineering review.

エンジニアリング参考データ: MAX398CPE+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX398CPE+ when an 8:1 CMOS analog multiplexer with on-resistance below 100 ohms, matching within 6 ohms, and variation of no more than 11 ohms is required in a 16-pin PDIP assembly. Its 3 V to 15 V supply range supports low-voltage and legacy equipment, while the through-hole package is useful for serviceable or socketed designs. Select MAX398CPE only after confirming that the non-plus ordering variant satisfies the required environmental and lifecycle conditions. Consider DG408 or DG409 when their detailed electrical ratings fit the circuit and an industry-standard 8:1 multiplexer is preferred. DG508A and DG509A are relevant for compatible legacy routing, while HI-508APZ is identified for commercial-temperature 15 V systems. Every proposed substitute still requires pin-by-pin and specification-level review before production release.

代替品との比較

パラメータ この製品 MAX398CPE DG408 DG409 DG508A DG509A HI-508APZ
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16
Brand Analog Devices Analog Devices Intersil Intersil Intersil Intersil Intersil
Multiplexer Configuration Single 8:1 Single 8:1 8:1 8:1 8:1 8:1 8:1
On-Resistance Less than 100 ohm Less than 100 ohm Approximately 100 ohm Approximately 100 ohm Approximately 100 ohm Approximately 100 ohm Approximately 100 ohm
Typical Application Precision analog signal routing Precision analog signal routing Analog signal routing Analog signal routing Analog signal routing Analog signal routing Analog signal routing

主な差別化要因

  • Published precision channel matching (vs DG408)
  • Flat on-resistance across the analog signal range (vs DG409)
  • Low documented on-resistance (vs HI-508APZ)
  • Wide legacy-compatible supply range (vs DG508A)

設計ノート

Place the MAX398CPE+ close to the shared analog path and to the multiplexer channel being selected. The on-resistance is below 100 ohms, but PCB trace resistance adds directly to that value and can vary with copper geometry and temperature. Keep the common terminal and channel traces short, use an adequate ground reference, and avoid sharing narrow traces between the mux and sensitive downstream circuitry.

Account for the complete insertion-loss path rather than only the specified on-resistance. Use the less-than-100-ohm switch resistance together with source impedance, load impedance, and PCB trace resistance when sizing the analog network. Because channel matching is specified within 6 ohms and variation across the analog range is limited to 11 ohms, the MAX398CPE+ is well suited to circuits where switching between similar sources must not create excessive level changes.

Do not treat a shared PDIP-16 footprint as sufficient proof of interchangeability. The MAX398CPE+, DG408, DG409, DG508A, DG509A, and HI-508APZ are identified as pin-compatible options, but replacement approval should verify enable polarity, address logic, analog signal limits, supply range, operating temperature, and channel-specific functions against the manufacturer pin-description table.

Keep the address and enable traces away from the common analog terminal and sensitive channel inputs. These digital control lines can carry fast transients when the selected channel changes; maintaining separation and a stable return path reduces coupling into the selected signal. Where possible, route control signals on the opposite side of the board from high-impedance analog nodes and place supply-decoupling components near the device pins.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The plus designation identifies the RoHS-compliant MAX398CPE+ version. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is confirmed in the cited product information.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX398CPE+ datasheet MAX398CPE+ pinout MAX398CPE+ datasheet pdf MAX398CPE+ equivalent MAX398CPE+ replacement MAX398CPE+ vs DG409 MAX398CPE+ footprint MAX398CPE+ price MAX398CPE+ stock Analog Devices MAX398CPE+ MAX398CPE+ DIP-16 pinout MAX398CPE+ application circuit

関連部品&用語

Analog Devices MAX398CPE+ MAX398CPE MAX398 DG408 DG409 DG508A DG509A HI-508APZ analog multiplexer multiplexer switch IC interface IC CMOS analog switch signal-routing semiconductor 8:1 multiplexer single-channel multiplexer precision multiplexer on-resistance channel matching analog signal range PDIP-16 DIP package through-hole package sample-and-hold RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示