MC145481DW - 6-Bit PCM Codec-Filter | NXP | 20-SOIC
部品番号: MC145481DW ✗ 生産終了MC145481DW 概要
A PCM codec-filter is an interface integrated circuit that converts between analog voice signals and digital PCM streams while also performing the filtering needed to limit signal bandwidth and reconstruct smooth analog audio. Its position in the hierarchy is PCM codec-filter > voice codec > audio interface IC > integrated circuit, where it links microphone or line-level analog circuitry to a digital telephony or transmission system.
Key features include a 6-bit PCM resolution, one analog-to-digital converter and one digital-to-analog converter, selectable A-Law or Mu-Law companding, and support for Short Frame Sync, Long Frame Sync, IDL, and GCI timing formats. An active RC filter preceding the switched-capacitor encoder filter suppresses very high-frequency noise before modulation, while the codec architecture maintains compatibility with related Motorola and NXP PCM interface devices.
The MC145481 uses switched-capacitor filtering rather than a conventional continuously filtered signal path. This approach integrates the encoder and decoder filter functions more efficiently, although external bypass, timing, and impedance details still determine practical signal-chain performance. The 20-pin SOIC package also requires careful layout to separate analog input and output paths from PCM clock and data lines.
Typical uses include digital telephone handsets, voice-processing modules, PCM channel equipment, line-card audio paths, and legacy telecommunications interfaces. These systems benefit from the device's combination of conversion, companding, clock-format flexibility, and filtering in one package, reducing the number of discrete analog filter and codec stages required.
When designing the circuit, verify the exact clock mode, frame-sync polarity, and companding configuration against the manufacturer datasheet before routing signals. Place the analog input network close to the ADC pins, keep the PCM interface traces short, and provide the specified bypass capacitance at the supply pins. This page also organizes replacement options, design cautions, and application guidance around this legacy interface IC.
ドロップイン代替品: MC145481DW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MC145481DWR2
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC145481DW-03
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC145481DW 最大定格&電気的特性
| Product Type | PCM codec-filter |
| ADC/DAC Count | 1 ADC / 1 DAC |
| PCM Resolution | 6 bit |
| PCM Interface | 6-bit parallel PCM |
| Companding | Pin-selectable Mu-Law or A-Law |
| Clock Formats | Short Frame Sync, Long Frame Sync, IDL, and GCI |
| Analog Channels | 1 channel |
| 電源電圧 | 3 V |
| パッケージ | 20-pin SOIC |
| 実装タイプ | Surface mount |
| Analog Input Stage | Input operational amplifier with active RC low-pass filter |
| Filtering Method | Switched-capacitor filter |
| Signal Conversion | Analog voice to PCM and PCM to analog voice |
| Band Limiting | Integrated encoder and decoder filtering |
| Application | PCM voice telecommunications systems |
MC145481DW 20-pin soic ピン配置ガイド
MC145481DW (20-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MC145481DW.
詳細は データシート をご参照ください。
主な用途
MC145481DW の用途: 6 件s: Legacy Digital Telephone Interface, PCM Voice Channel Equipment, Voice Processing Module, Telecommunications Line Card Audio Path, Legacy Voice Encoder and Decoder, Telephony Test and Measurement Equipment.
Legacy Digital Telephone Interface
The MC145481DW fits a legacy digital telephone path that must convert analog voice into a 6-bit companded PCM stream. Its single ADC, selectable A-Law or Mu-Law companding, and support for Long Frame Sync, Short Frame Sync, IDL, and GCI timing reduce the number of separate conversion and filter blocks required. The NXP datasheet describes the integrated switched-capacitor filtering that limits the analog signal before encoding. In an existing handset or line equipment design, this makes the device useful for a repair or extension where the surrounding clock and framing architecture must remain unchanged.
おすすめ
PCM Voice Channel Equipment
The MC145481DW is suitable for a PCM channel module that accepts analog speech and transmits it as a companded digital word stream. Its 6-bit interface, one ADC and one DAC, and multiple supported frame formats allow the codec-filter to sit between an analog line circuit and a digital transport backplane. Integrated band limiting and smoothing remove the need for separate encoder and decoder filter stages, while pin-selectable companding supports the two dominant legacy voice formats. System timing, frame-sync polarity, and companding must match the connected channel equipment exactly.
おすすめ
Voice Processing Module
The MC145481DW can serve as the analog-to-digital and digital-to-analog boundary in a standalone voice-processing module. The device performs voice digitization, reconstruction, band limiting, and smoothing in one 20-pin SOIC package, making it practical for legacy voice-handling subsystems with limited board area. Its active input operational amplifier and RC low-pass stage suppress very high-frequency noise before the switched-capacitor encoder filter. The implementation remains clock-sensitive, so the module must provide the required frame-sync format and a clean analog reference network.
おすすめ
Telecommunications Line Card Audio Path
The MC145481DW is appropriate for an older telecommunications line card requiring a compact analog voice channel. One ADC and one DAC support bidirectional voice conversion, while the 6-bit PCM interface connects directly to a companded system bus. The NXP datasheet states that the device remains compatible with Motorola-family telecom products, including interface and transcoding companions, which is useful when extending older multi-channel equipment. Analog input conditioning, supply bypassing, and clock routing remain critical because the codec-filter combines precision analog stages with digital framing signals in one package.
おすすめ
Legacy Voice Encoder and Decoder
The MC145481DW provides a combined encoder and decoder for legacy 6-bit A-Law or Mu-Law voice signals. The encoder filters and digitizes the analog input, while the decoder reconstructs and smooths the analog output, reducing external circuitry in a compact PCM audio subsystem. Its supported timing formats allow it to operate in systems using Short Frame Sync, Long Frame Sync, IDL, or GCI conventions. Because the device is obsolete, engineers should use it primarily for compatibility with installed equipment and verify current supply through a formal quotation.
おすすめ
Telephony Test and Measurement Equipment
The MC145481DW can be used in legacy test equipment that must generate or analyze companded PCM voice channels. Its selectable A-Law and Mu-Law modes allow one codec-filter to cover both common formats, while the multiple supported frame timing schemes help instrument designs emulate different telephone-system environments. The integrated input and reconstruction filters simplify creation of repeatable voice test signals. Instrument designers must still provide accurate clocking, analog termination, and sufficient decoupling, and should account for the obsolete product status when planning laboratory spares.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC145481DW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC145481DWR2 | MC145481DW-03 |
|---|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-SOIC | 20-SOIC | 20-SOIC |
| Device Type | PCM codec-filter | PCM codec-filter | PCM codec-filter |
| ADC/DAC Count | 1 ADC / 1 DAC | 1 ADC / 1 DAC | 1 ADC / 1 DAC |
| PCM Resolution | 6 bit | 6 bit | 6 bit |
| Companding | Pin-selectable Mu-Law or A-Law | Pin-selectable Mu-Law or A-Law | Pin-selectable Mu-Law or A-Law |
| Supported Clock Formats | Short Frame Sync, Long Frame Sync, IDL, and GCI | Short Frame Sync, Long Frame Sync, IDL, and GCI | Short Frame Sync, Long Frame Sync, IDL, and GCI |
| Supply Voltage | 3 V | 3 V | 3 V |
主な差別化要因
- Combines conversion, companding, and filtering in one codec-filter package (vs MC145481DWR2)
- Supports four legacy PCM timing environments (vs MC145481DW-03)
- Pin-selectable A-Law or Mu-Law companding (vs MC145481DWR2)
設計ノート
Route the analog input and reconstructed analog output away from the PCM clock, frame-sync, and data traces. Place the input network at the ADC pins and keep the switched-capacitor clocking signals over a quiet ground region. The NXP datasheet describes an input operational amplifier followed by an active RC filter and a switched-capacitor encoder filter, so separating those paths helps prevent digital switching activity from modulating the voice signal.
Confirm Short Frame Sync, Long Frame Sync, IDL, or GCI operation before assigning the clock and framing nets. These formats have different timing relationships, and a mismatch can produce incorrect framing, intermittent data errors, or aliasing artifacts. The MC145481 datasheet notes compatibility with multiple Motorola-family telecom interfaces, but compatibility does not remove the need to verify edge timing, signal polarity, and data alignment against the selected system convention.
Use the supply and bypass configuration specified in the manufacturer datasheet, and keep the decoupling capacitor adjacent to the device power pin. The MC145481DW operates from a 3 V supply, so supply noise can appear directly in the reconstructed analog output even when the PCM bus is quiet. Check the analog and digital ground arrangement in the application circuit and avoid routing return current from the switching-capacitor clock nodes through the sensitive analog return path.
Do not select a modern audio codec as a direct replacement without checking the complete interface contract. Resolution, companding, frame timing, analog gain structure, supply voltage, and pinout can all differ. The MC145481DW is intended for a legacy 6-bit PCM voice environment, so an apparently similar codec may require a redesigned PCB, clock subsystem, and software interface. For repair applications, preserve the original device behavior and operating clock configuration.
コンプライアンス情報
The MC145481 is an older PCM codec-filter, and no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. AEC-Q100 is not applicable to this non-automotive interface device.