NXP Semiconductors

MC145481DW - 6-Bit PCM Codec-Filter | NXP | 20-SOIC

料号: MC145481DW ✗ 停产
3 V Vdss 20-pin SOIC Package Short Frame Sync, Long Frame Sync, IDL, and GCI Speed
最小起订量: 1 |

MC145481DW 概述

The NXP MC145481DW is a general-purpose, single-channel PCM codec-filter with a 6-bit parallel PCM interface, 1 ADC, 1 DAC, and pin-selectable Mu-Law or A-Law companding. The device is offered in a 20-pin SOIC package and performs voice digitization, reconstruction, band limiting, and smoothing within PCM telecommunications systems.

A PCM codec-filter is an interface integrated circuit that converts between analog voice signals and digital PCM streams while also performing the filtering needed to limit signal bandwidth and reconstruct smooth analog audio. Its position in the hierarchy is PCM codec-filter > voice codec > audio interface IC > integrated circuit, where it links microphone or line-level analog circuitry to a digital telephony or transmission system.

Key features include a 6-bit PCM resolution, one analog-to-digital converter and one digital-to-analog converter, selectable A-Law or Mu-Law companding, and support for Short Frame Sync, Long Frame Sync, IDL, and GCI timing formats. An active RC filter preceding the switched-capacitor encoder filter suppresses very high-frequency noise before modulation, while the codec architecture maintains compatibility with related Motorola and NXP PCM interface devices.

The MC145481 uses switched-capacitor filtering rather than a conventional continuously filtered signal path. This approach integrates the encoder and decoder filter functions more efficiently, although external bypass, timing, and impedance details still determine practical signal-chain performance. The 20-pin SOIC package also requires careful layout to separate analog input and output paths from PCM clock and data lines.

Typical uses include digital telephone handsets, voice-processing modules, PCM channel equipment, line-card audio paths, and legacy telecommunications interfaces. These systems benefit from the device's combination of conversion, companding, clock-format flexibility, and filtering in one package, reducing the number of discrete analog filter and codec stages required.

When designing the circuit, verify the exact clock mode, frame-sync polarity, and companding configuration against the manufacturer datasheet before routing signals. Place the analog input network close to the ADC pins, keep the PCM interface traces short, and provide the specified bypass capacitance at the supply pins. This page also organizes replacement options, design cautions, and application guidance around this legacy interface IC.

直接替换替代料: MC145481DW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MC145481DWR2

✅ 直接替换
📦 20-SOIC
Ordering suffix differs; same MC145481 device and 20-pin SOIC footprint, with no verified electrical difference

📋 参考替代料(不在目录中)

MC145481DW-03

✅ 直接替换
📦 20-SOIC
Ordering suffix differs from MC145481DW; same device designation and 20-pin SOIC footprint

📋 参考替代料(不在目录中)

MC145481DW 最大额定值与电气特性

Product Type PCM codec-filter
ADC/DAC Count 1 ADC / 1 DAC
PCM Resolution 6 bit
PCM Interface 6-bit parallel PCM
Companding Pin-selectable Mu-Law or A-Law
Clock Formats Short Frame Sync, Long Frame Sync, IDL, and GCI
Analog Channels 1 channel
电源电压 3 V
封装 20-pin SOIC
安装类型 Surface mount
Analog Input Stage Input operational amplifier with active RC low-pass filter
Filtering Method Switched-capacitor filter
Signal Conversion Analog voice to PCM and PCM to analog voice
Band Limiting Integrated encoder and decoder filtering
Application PCM voice telecommunications systems

MC145481DW 20-pin soic 引脚配置指南

MC145481DW(20-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MC145481DW 的 20-pin soic 封装引脚图

暂无详细引脚数据: MC145481DW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC145481DW 适用于 6 应用s: Legacy Digital Telephone Interface, PCM Voice Channel Equipment, Voice Processing Module, Telecommunications Line Card Audio Path, Legacy Voice Encoder and Decoder, Telephony Test and Measurement Equipment.

📱

Legacy Digital Telephone Interface

The MC145481DW fits a legacy digital telephone path that must convert analog voice into a 6-bit companded PCM stream. Its single ADC, selectable A-Law or Mu-Law companding, and support for Long Frame Sync, Short Frame Sync, IDL, and GCI timing reduce the number of separate conversion and filter blocks required. The NXP datasheet describes the integrated switched-capacitor filtering that limits the analog signal before encoding. In an existing handset or line equipment design, this makes the device useful for a repair or extension where the surrounding clock and framing architecture must remain unchanged.

🌐

PCM Voice Channel Equipment

The MC145481DW is suitable for a PCM channel module that accepts analog speech and transmits it as a companded digital word stream. Its 6-bit interface, one ADC and one DAC, and multiple supported frame formats allow the codec-filter to sit between an analog line circuit and a digital transport backplane. Integrated band limiting and smoothing remove the need for separate encoder and decoder filter stages, while pin-selectable companding supports the two dominant legacy voice formats. System timing, frame-sync polarity, and companding must match the connected channel equipment exactly.

🎧

Voice Processing Module

The MC145481DW can serve as the analog-to-digital and digital-to-analog boundary in a standalone voice-processing module. The device performs voice digitization, reconstruction, band limiting, and smoothing in one 20-pin SOIC package, making it practical for legacy voice-handling subsystems with limited board area. Its active input operational amplifier and RC low-pass stage suppress very high-frequency noise before the switched-capacitor encoder filter. The implementation remains clock-sensitive, so the module must provide the required frame-sync format and a clean analog reference network.

🏭

Telecommunications Line Card Audio Path

The MC145481DW is appropriate for an older telecommunications line card requiring a compact analog voice channel. One ADC and one DAC support bidirectional voice conversion, while the 6-bit PCM interface connects directly to a companded system bus. The NXP datasheet states that the device remains compatible with Motorola-family telecom products, including interface and transcoding companions, which is useful when extending older multi-channel equipment. Analog input conditioning, supply bypassing, and clock routing remain critical because the codec-filter combines precision analog stages with digital framing signals in one package.

🔧

Legacy Voice Encoder and Decoder

The MC145481DW provides a combined encoder and decoder for legacy 6-bit A-Law or Mu-Law voice signals. The encoder filters and digitizes the analog input, while the decoder reconstructs and smooths the analog output, reducing external circuitry in a compact PCM audio subsystem. Its supported timing formats allow it to operate in systems using Short Frame Sync, Long Frame Sync, IDL, or GCI conventions. Because the device is obsolete, engineers should use it primarily for compatibility with installed equipment and verify current supply through a formal quotation.

🖥️

Telephony Test and Measurement Equipment

The MC145481DW can be used in legacy test equipment that must generate or analyze companded PCM voice channels. Its selectable A-Law and Mu-Law modes allow one codec-filter to cover both common formats, while the multiple supported frame timing schemes help instrument designs emulate different telephone-system environments. The integrated input and reconstruction filters simplify creation of repeatable voice test signals. Instrument designers must still provide accurate clocking, analog termination, and sufficient decoupling, and should account for the obsolete product status when planning laboratory spares.

推荐产品汇总

MC145422 Related PCM transceiver family 用于: Legacy Digital Telephone Interface, Telephony Test and Measurement Equipment MC145474 Related S/T-interface transceiver 用于: Legacy Digital Telephone Interface, Telephony Test and Measurement Equipment MC145532 Related ADPCM transcoding interface 用于: PCM Voice Channel Equipment, Legacy Voice Encoder and Decoder MC145481 Base PCM codec-filter device family 用于: PCM Voice Channel Equipment, Legacy Voice Encoder and Decoder MC145572 Related U-interface transceiver 用于: Voice Processing Module MC145574 Related S/T-interface transceiver 用于: Voice Processing Module MC14LC5472 Related telecom interface device 用于: Telecommunications Line Card Audio Path MC145426 Related PCM interface family 用于: Telecommunications Line Card Audio Path
What is the MC145481DW used for?
The MC145481DW is a single-channel PCM codec-filter for analog voice encoding and decoding in digital telecommunications equipment. It combines one ADC, one DAC, a 6-bit PCM interface, band-limiting filters, and pin-selectable Mu-Law or A-Law companding. According to the NXP MC145481 datasheet, the device accepts Short Frame Sync, Long Frame Sync, IDL, and GCI clock formats, making it suitable for legacy PCM channel equipment, voice-processing modules, and telephone interfaces.
What is the resolution of the MC145481DW?
The MC145481DW uses a 6-bit PCM format with one analog-to-digital converter and one digital-to-analog converter. This resolution reflects the companded voice coding era for which the device was designed rather than modern high-resolution audio. The NXP datasheet identifies the IC as a general-purpose per-channel PCM codec-filter with selectable A-Law or Mu-Law companding, and its 20-pin SOIC implementation contains the conversion and filtering functions in one package.
Where can I download the MC145481DW datasheet PDF?
Download the official MC145481 datasheet from the NXP document at https://www.nxp.com/docs/en/data-sheet/MC145481.pdf. The document describes the device as a general-purpose per-channel PCM codec-filter with pin-selectable Mu-Law or A-Law companding. It also identifies the 20-pin SOG and SSOP package options, explains the input operational amplifier and switched-capacitor filtering, and lists supported PCM timing environments.
Where can I find the MC145481DW pinout?
The MC145481DW pin assignments are found in the pin-description and connection-diagram sections of the official NXP MC145481 datasheet. The MC145481DW ordering code corresponds to the 20-pin SOIC implementation, but the pinout table must still be matched to the exact package drawing and revision shown in that document. Use the manufacturer pin table when assigning analog, clock, frame-sync, and PCM data nets rather than relying on a generic package drawing.
What clock formats does the MC145481DW support?
The MC145481DW supports Short Frame Sync, Long Frame Sync, IDL, and GCI timing formats. According to the NXP MC145481 datasheet, the device accepts a variety of PCM clock arrangements and maintains compatibility with related Motorola-family interface components. Because frame-sync timing and polarity differ among telephone-system conventions, confirm the system timing mode in the datasheet before assigning a net to the frame or clock pins on a new PCB.
What is the difference between A-Law and Mu-Law on the MC145481DW?
A-Law and Mu-Law are the two companding formats available through pin selection on the MC145481DW. The NXP datasheet describes the device as a per-channel PCM codec-filter with pin-selectable Mu-Law or A-Law companding. Companding reduces the number of bits needed for acceptable voice quality by applying a nonuniform amplitude scale. Select the format that matches the transmitting and receiving ends of the PCM link; the two formats are not interchangeable.
Is the MC145481DW an active or obsolete part?
The MC145481DW is an obsolete legacy PCM codec-filter rather than a current general-purpose audio converter. The manufacturer documentation describes it as a 20-pin SOG and SSOP device intended for PCM voice systems, and catalog references identify the obsolete status. For new designs, use the Request a Quote form on this page to request availability and sourcing options for the exact MPN before committing a production layout.
What is the price of the MC145481DW?
Current commercial terms for the MC145481DW should be confirmed through the Request a Quote form on this page because this legacy codec-filter is sold through different channels with pricing that changes over time. The form lets you request the unit price, minimum order quantity, and current lead time for the exact 20-pin SOIC MPN. Availability should also be checked against your production schedule rather than assumed from an archived catalog entry.
What is the lead time for MC145481DW?
The current lead time for MC145481DW depends on remaining factory or distribution inventory and should be requested through the Request a Quote form on this page. The device is an obsolete 20-pin SOIC PCM codec-filter, so lead time can be much longer than for an active logic or interface IC. Include your annual usage, required package, and target date on the request to obtain a sourcing answer tied to the exact MPN.
Is MC145481DW available in stock?
MC145481DW stock should be verified through the Request a Quote form on this page instead of inferred from a listing page. This obsolete 6-bit PCM codec-filter may be available from limited remaining inventory, with availability affected by package, quantity, and sourcing channel. Submit the exact MPN MC145481DW and your required quantity so the quotation can confirm current stock, delivery timing, and any traceability requirements.
What is the best drop-in replacement for the MC145481DW?
The closest identified same-package option is the MC145481DWR2, which retains the MC145481 device and 20-pin SOIC footprint while changing the ordering form. Because this part is obsolete, confirm pin compatibility, device revision, and sourcing availability directly with the manufacturer before treating it as a drop-in replacement. The replacement search did not identify enough independent pin-compatible codec families to recommend a cross-brand substitute safely.
Can MC145481DWR2 replace MC145481DW?
MC145481DWR2 is the closest identified MC145481 ordering option for a 20-pin SOIC replacement of MC145481DW. The comparison references associate it with the same base MC145481 device family, but ordering suffixes can indicate different reel or packaging treatment rather than electrical changes. Review the manufacturer ordering table and confirm the required tape-and-reel format before treating the two MPNs as interchangeable in procurement or assembly.
MC145481DW vs MC145481DWR2 - which one should I order?
Choose MC145481DW when your bill of materials specifies the original ordering code and MC145481DWR2 when the manufacturer confirms the alternate 20-pin SOIC ordering form is acceptable for your assembly process. Both relate to the MC145481 PCM codec-filter family, so the electrical distinction is not the main concern; package handling and supply continuity are. Use the Request a Quote form to request availability and the manufacturer ordering information for the required variant.
When should I choose MC145481DW instead of a modern audio codec?
Choose MC145481DW when maintaining a legacy PCM system that requires 6-bit A-Law or Mu-Law companding and Short Frame Sync, Long Frame Sync, IDL, or GCI timing compatibility. A modern audio codec is preferable for new designs that need higher resolution, lower latency, smaller packages, or current production support. MC145481DW remains useful for repairs and extensions of existing telecom equipment where changing the system clock and signal format would be impractical.
Is the MC145481DW suitable for a telephone line interface?
The MC145481DW is suitable for a legacy telephone or PCM voice path that uses the supported 6-bit companded format and frame timing. Its integrated ADC, DAC, and band-limiting filters are designed for voice digitization and reconstruction, while the multiple clock formats support several telecommunications conventions. The audio input level, line impedance, clock source, and companding mode must match the surrounding telephone circuitry, and the part's obsolete lifecycle status requires an availability check.
What are the key specifications of MC145481DW that engineers should know?
The MC145481DW is a 20-pin SOIC, single-channel PCM codec-filter with one ADC, one DAC, 6-bit resolution, pin-selectable Mu-Law or A-Law companding, and a 3 V supply. The NXP datasheet identifies an active RC input filter followed by switched-capacitor filtering and supports Short Frame Sync, Long Frame Sync, IDL, and GCI timing. These are the primary parameters to check against a legacy PCM interface.
What is the best NXP equivalent for the MC145481DW?
The closest identified NXP-family alternative is MC145481DWR2 in the same 20-pin SOIC class as MC145481DW. No independently verified cross-brand pin-compatible codec was identified in the replacement search, so an equivalent from another manufacturer should not be assumed. For a genuine second-source decision, request the current NXP ordering information and obtain a manufacturer-approved cross-reference rather than substituting a codec with different timing or companding behavior.

工程参考数据: MC145481DW ——对比、设计指导和合规信息。

选型指南

Choose the MC145481DW when maintaining or extending equipment built around a 6-bit PCM voice interface using A-Law or Mu-Law companding and Short Frame Sync, Long Frame Sync, IDL, or GCI timing. Its integrated ADC, DAC, active input filtering, and reconstruction filtering simplify the analog and digital signal chain when the original architecture must be preserved. MC145481DWR2 and MC145481DW-03 are the closest same-family ordering options when their suffix and packaging treatment are acceptable. Do not assume that a modern audio codec is a drop-in substitute: higher resolution, different clocking, different companding, and different pin assignments can require substantial redesign. For new products without a legacy compatibility requirement, choose an active audio codec with current supply, software control, and lower-latency digital interfaces.

与替代料对比

参数 本产品 MC145481DWR2 MC145481DW-03
Manufacturer NXP Semiconductors NXP Semiconductors NXP Semiconductors
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 20-SOIC 20-SOIC 20-SOIC
Device Type PCM codec-filter PCM codec-filter PCM codec-filter
ADC/DAC Count 1 ADC / 1 DAC 1 ADC / 1 DAC 1 ADC / 1 DAC
PCM Resolution 6 bit 6 bit 6 bit
Companding Pin-selectable Mu-Law or A-Law Pin-selectable Mu-Law or A-Law Pin-selectable Mu-Law or A-Law
Supported Clock Formats Short Frame Sync, Long Frame Sync, IDL, and GCI Short Frame Sync, Long Frame Sync, IDL, and GCI Short Frame Sync, Long Frame Sync, IDL, and GCI
Supply Voltage 3 V 3 V 3 V

关键差异点

  • Combines conversion, companding, and filtering in one codec-filter package (对比 MC145481DWR2)
  • Supports four legacy PCM timing environments (对比 MC145481DW-03)
  • Pin-selectable A-Law or Mu-Law companding (对比 MC145481DWR2)

设计说明

Route the analog input and reconstructed analog output away from the PCM clock, frame-sync, and data traces. Place the input network at the ADC pins and keep the switched-capacitor clocking signals over a quiet ground region. The NXP datasheet describes an input operational amplifier followed by an active RC filter and a switched-capacitor encoder filter, so separating those paths helps prevent digital switching activity from modulating the voice signal.

Confirm Short Frame Sync, Long Frame Sync, IDL, or GCI operation before assigning the clock and framing nets. These formats have different timing relationships, and a mismatch can produce incorrect framing, intermittent data errors, or aliasing artifacts. The MC145481 datasheet notes compatibility with multiple Motorola-family telecom interfaces, but compatibility does not remove the need to verify edge timing, signal polarity, and data alignment against the selected system convention.

Use the supply and bypass configuration specified in the manufacturer datasheet, and keep the decoupling capacitor adjacent to the device power pin. The MC145481DW operates from a 3 V supply, so supply noise can appear directly in the reconstructed analog output even when the PCM bus is quiet. Check the analog and digital ground arrangement in the application circuit and avoid routing return current from the switching-capacitor clock nodes through the sensitive analog return path.

Do not select a modern audio codec as a direct replacement without checking the complete interface contract. Resolution, companding, frame timing, analog gain structure, supply voltage, and pinout can all differ. The MC145481DW is intended for a legacy 6-bit PCM voice environment, so an apparently similar codec may require a redesigned PCB, clock subsystem, and software interface. For repair applications, preserve the original device behavior and operating clock configuration.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MC145481 is an older PCM codec-filter, and no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. AEC-Q100 is not applicable to this non-automotive interface device.

相关搜索

MC145481DW MC145481DW datasheet MC145481DW datasheet pdf MC145481DW pinout NXP MC145481DW MC145481 6-bit PCM codec MC145481DW 20-SOIC MC145481DW A-Law Mu-Law MC145481DW drop-in replacement MC145481DW vs MC145481DWR2 MC145481DW price MC145481DW stock MC145481DW telephone interface MC145481DW clock format

相关元器件 & 术语

NXP Semiconductors MC145481DW MC145481 MC145481DWR2 MC145481DW-03 PCM codec-filter voice codec audio interface IC integrated circuit 6-bit PCM ADC DAC A-Law companding Mu-Law companding switched-capacitor filter active RC filter Short Frame Sync Long Frame Sync IDL timing GCI timing 20-pin SOIC surface-mount package legacy telecommunications digital telephone interface voice digitization
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情