NXP Semiconductors

MC33399DR2 - LIN Bus 1/1 Transceiver | NXP Semiconductors

部品番号: MC33399DR2 ✗ 生産終了
8-SOIC Package
MOQ: 1 |

MC33399DR2 概要

NXP Semiconductors MC33399DR2 is a 1/1 LIN-bus physical-layer transceiver packaged in an 8-pin SOIC. Its single-transceiver architecture connects a microcontroller-based LIN node to a LIN network by providing the interface between digital controller signals and the wired bus. The SOIC-8 package, gull-wing terminals, eight terminals, and automotive temperature grade make the device associated with compact automotive networking designs where component sourcing follows a defined package and environmental classification.

A LIN physical-layer interface is a communications IC used in low-cost, single-wire vehicle networks. LIN belongs to the broader hierarchy of interface ICs, where a physical-layer transceiver sits between a host microcontroller and an external bus. The MC33399DR2 is used where one node must exchange LIN signals with the network while the host processor handles higher-level tasks such as framing, diagnostics, and application data.

The MC33399DR2 is identified as a half LIN-bus transceiver with one transmitter and one receiver. It is offered in an 8-SOIC package with a rectangular package body and gull-wing terminal form. The automotive temperature-grade classification is important for engineers evaluating the part for vehicle electrical environments. The exact operating voltage, current consumption, data rate, logic thresholds, and protection ratings should be confirmed from the manufacturer datasheet before final circuit release.

Its principal engineering value is a dedicated physical interface that separates network communication from the host microcontroller. This division of responsibility allows the controller software to operate at the protocol layer while the transceiver handles bus-facing signal transmission and reception. The 8-SOIC outline also supports compact mixed-signal and automotive-control layouts, although exposed-pin clearance, soldering profile, and thermal performance still require normal SOIC assembly practices.

Typical applications include LIN-based vehicle body controllers, door and seat modules, climate-control peripherals, lighting controls, switches, sensor interfaces, and other distributed nodes that use a one-wire LIN network. In these systems, the transceiver provides the physical connection while a microcontroller handles command interpretation and bus scheduling. The MC33399DR2 can also serve as a development interface when reproducing LIN-network behavior in automotive electronics prototypes.

For layout, keep the LIN bus connection and its protection network away from sensitive analog and high-speed digital traces. Follow the pin-description and recommended-application diagrams in the manufacturer datasheet when assigning pins and selecting external components. Verify the exact package drawing and land pattern against the MC33399DR2 ordering information rather than relying on a generic 8-SOIC footprint.

This product page combines the confirmed LIN transceiver classification, 8-SOIC package information, source traceability, sourcing guidance, and application-focused engineering guidance. It also separates confirmed product attributes from parameters that still require confirmation during schematic and qualification work, helping designers move from part identification to a controlled design review.

ドロップイン代替品: MC33399DR2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

MC33171DR2

✅ ドロップイン
📦 8-SOIC
Uses the same 8-SOIC LIN-transceiver package, while voltage range and power-consumption specifications differ and require datasheet verification

📋 参考代替品(カタログ未掲載)

MC33399DR2 仕様

Device Type 1/1 LIN-bus transceiver
LIN Interface Type Half LIN-bus physical-layer interface
Manufacturer NXP Semiconductors
パッケージ 8-SOIC
Number of Terminals 8
Terminal Form Gull wing
Package Code SOP
Package Shape Rectangular
Temperature Grade Automotive
Transmitter Count 1
Receiver Count 1
実装タイプ Surface mount
RoHS ステータス RoHS non-compliant

MC33399DR2 rectangular ピン配置ガイド

MC33399DR2 (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MC33399DR2 の rectangular パッケージピン配置図

詳細なピン配置データはありません: MC33399DR2.

詳細は データシート をご参照ください。

主な用途

MC33399DR2 の用途: 6 件s: Automotive LIN Body-Control Node, Vehicle Door and Seat Module, LIN Climate-Control Peripheral, Automotive Switch and Lighting Controller, LIN Sensor Gateway, Automotive Electronics Test Interface.

🚗

Automotive LIN Body-Control Node

The MC33399DR2 fits an automotive LIN body-control node because it provides one transmitter and one receiver in an 8-SOIC package and is identified with an automotive temperature-grade classification. A host microcontroller handles command decoding, diagnostics, and application logic, while the transceiver connects those functions to the LIN bus. The 8-pin surface-mount outline supports compact controller boards, but the layout must follow the manufacturer pin-description and application diagrams. Verify the exact supply limits, bus-voltage tolerance, and automotive temperature range before releasing the schematic. The MC33399DR2 is suitable only when the confirmed ordering code satisfies the vehicle program’s electrical and sourcing requirements.

🚗

Vehicle Door and Seat Module

A door, seat, or access module can use the MC33399DR2 as the LIN physical interface between a local microcontroller and the vehicle network. Its one-transmitter, one-receiver arrangement separates bus signaling from the controller’s protocol processing, while the 8-SOIC package provides a compact eight-terminal implementation. The confirmed automotive temperature-grade classification supports evaluation for vehicle environments. During design review, compare the manufacturer’s bus and logic specifications with the host MCU levels and confirm protection requirements for the cable-connected network. Because the MC33399DR2 is obsolete, use the Quote Request form on this page to establish whether traceable supply can support the intended production interval.

🏭

LIN Climate-Control Peripheral

The MC33399DR2 can serve as the network interface in a climate-control peripheral that exchanges commands and sensor information through LIN. The 1/1 transceiver provides the physical transmitter and receiver paths, allowing the microcontroller to manage temperature measurements, fan requests, and button events without implementing the bus driver directly. Its 8-SOIC package is practical for compact automotive accessory controllers. Confirm the interface voltage range, supply current, and operating-temperature limits in the manufacturer datasheet, and use the recommended external network components unchanged unless the complete design receives separate engineering approval. This role also makes the MC33399DR2 suitable for prototype systems that reproduce LIN communication behavior during module validation.

💡

Automotive Switch and Lighting Controller

For a LIN-connected switch or lighting controller, the MC33399DR2 offers one transmitter and one receiver in an eight-terminal SOIC outline. A microcontroller can encode switch position or lighting commands while the transceiver communicates them over the single-wire LIN network. The compact package and automotive temperature-grade designation are useful attributes for distributed vehicle electronics, while the host controller handles debouncing, diagnostics, and lighting state. Pin mapping, logic thresholds, and bus protection must be verified against the manufacturer documentation because package equivalence alone does not establish interchangeability. For production continuity, request current traceability and lot-level availability through the Quote Request form on this page.

🧩

LIN Sensor Gateway

The MC33399DR2 can form the LIN communication section of a sensor gateway in which a microcontroller aggregates measurements and publishes them to a LIN master. The device’s one transmitter and one receiver provide a compact physical interface, while the 8-SOIC package leaves board area for sensing and conditioning circuitry. Because LIN transceivers connect to an external wired network, the schematic and PCB should follow the manufacturer’s bus, ground, and protection recommendations. Confirm the maximum bus voltage, operating-temperature range, and supply-current behavior before deployment. The obsolete lifecycle status makes lifecycle planning essential; the Quote Request form can establish current supply and lead-time options for an exact quantity.

🔧

Automotive Electronics Test Interface

The MC33399DR2 can be used in a LIN interface test fixture that lets a controller or test system exercise communication with a physical LIN network. Its one transmitter and one receiver support bidirectional bus signaling, and the 8-SOIC package permits straightforward connection to a small test PCB. The interface circuit should be based on the manufacturer application diagram so that bus termination, protection, and grounding match the intended network. During prototype validation, monitor the target’s logic thresholds and supply behavior rather than relying only on its LIN classification. When sourcing additional units for a complete fixture, use the Quote Request form on this page and request current availability and lead time.

What is the MC33399DR2?
The MC33399DR2 is an NXP Semiconductors 1/1 LIN-bus physical-layer transceiver packaged in an 8-SOIC. According to the manufacturer datasheet description, it provides one transmitter and one receiver for connecting a microcontroller-based node to a LIN network. Its package, terminal arrangement, and automotive temperature-grade classification are the principal identity criteria when checking a replacement part.
What package does the MC33399DR2 use?
The MC33399DR2 uses an 8-SOIC package with eight gull-wing terminals, a rectangular package body, and an SOP package code. The listing information identifies the physical package clearly, but engineers should still cross-check dimensions and pin numbering against the manufacturer package drawing. A generic SOIC-8 land pattern should not replace confirmation of the exact MC33399DR2 footprint.
Where can I download the MC33399DR2 datasheet PDF?
The MC33399DR2 datasheet is available through the linked Freescale Semiconductor PDF record on alldatasheet. The document is identified as a 19-page Local Interconnect Network physical-interface datasheet. Use the manufacturer document inside that record for pin descriptions, electrical limits, application information, and recommended circuitry, and record the document revision used during design verification.
What is the pinout of the MC33399DR2?
The MC33399DR2 uses an eight-pin SOIC, but the individual pin names and numbers require confirmation from the manufacturer pin-description table. Use the manufacturer datasheet when assigning supply, ground, transmit, receive, enable, and bus connections. Do not infer the pinout solely from another 8-SOIC LIN transceiver because standard SOIC placement does not guarantee equivalent signal mapping.
What is the MC33399DR2 used for in automotive systems?
The MC33399DR2 is used as the physical-layer connection between a host microcontroller and a LIN vehicle network. According to the manufacturer datasheet, it is a one-transmitter, one-receiver LIN interface with an automotive temperature-grade classification. Typical uses include body-control modules, door modules, climate controls, lighting controllers, switches, and sensor nodes.
Is the MC33399DR2 a LIN transceiver or a voltage regulator?
The MC33399DR2 is a LIN physical-interface transceiver, not a general-purpose voltage regulator. Its one transmitter and one receiver connect a controller to the LIN bus, while protocol framing and application handling remain the responsibility of the host microcontroller. This distinction is important when comparing the part with similarly packaged power-management or communications devices.
MC33399DR2 vs MC33171DR2: which LIN interface fits my design?
The MC33399DR2 and MC33171DR2 are both identified as NXP 8-SOIC LIN-interface devices, but the comparison data indicates that voltage range, power consumption, and package-related considerations should be checked before substitution. Use MC33399DR2 when its manufacturer datasheet and exact ordering configuration match the design. Treat MC33171DR2 as a candidate only after verifying every external pin and electrical limit.
When should I choose the MC33399DR2 over another 8-SOIC LIN transceiver?
Choose the MC33399DR2 when an existing design requires the NXP 1/1 LIN transceiver in the 8-SOIC outline, an automotive temperature-grade classification, and the exact electrical behavior documented for this ordering code. If a replacement is being considered for an existing PCB, confirm pin-to-pin continuity, supply limits, logic thresholds, bus protection requirements, and lifecycle availability before approving the substitution.
Is the MC33399DR2 suitable for a LIN sensor interface?
The MC33399DR2 can support a LIN sensor node when the module includes a suitable host microcontroller and the sensor measurement itself can be represented through LIN protocol data. The device provides one transmitter and one receiver for bus communication, while the controller handles sensor sampling, diagnostics, and application data. Confirm voltage, current, temperature, and bus-performance requirements before deployment.
What can replace the MC33399DR2?
A valid replacement must use the same 8-SOIC footprint, preserve the MC33399DR2 pin mapping, and meet the applicable bus, supply, logic-threshold, timing, and temperature requirements. MC33171DR2 is a documented 8-SOIC comparison candidate, but it should not be treated as an automatic drop-in replacement until its pin assignments and electrical limits are checked against the manufacturer datasheets. Request sourcing support through the Quote Request form on this page.
What is the best drop-in replacement for the obsolete MC33399DR2?
The best drop-in replacement is the device that matches the 8-SOIC footprint and every externally connected function of the MC33399DR2. MC33171DR2 appears in an 8-SOIC comparison, while MC33269DR2-5.0G is not suitable because it is described as a voltage regulator rather than a LIN transceiver. Engineering review and current lifecycle confirmation are required before any replacement is released.
How should I check MC33399DR2 lifecycle availability?
The product is classified as obsolete for this data update, so production planning should treat new procurement as constrained. Confirm the status with the manufacturer product selector or an authorized supply channel and request a formal supply-response plan for any residual demand. The Quote Request form on this page can be used to request current sourcing options, minimum quantities, and lead time for an exact MC33399DR2 order.
Where can I buy MC33399DR2 and what is its current lead time?
Use the Quote Request form on this page to request the current unit availability, minimum order quantity, and production lead time for MC33399DR2. Because the component is classified as obsolete, confirm whether any inventory is traceable and whether the quantity can be allocated to a complete production lot. Do not base a schedule on a historical distributor listing alone.
What are the key specifications of MC33399DR2 that engineers should know?
The confirmed MC33399DR2 specifications are a 1/1 LIN physical interface, one transmitter, one receiver, an 8-SOIC package, eight gull-wing terminals, an SOP package code, a rectangular body, and an automotive temperature grade. The interface voltage range, maximum bus voltage, data rate, supply current, logic levels, and exact operating-temperature limits require confirmation from the manufacturer datasheet before schematic sign-off.
Is MC33399DR2 RoHS compliant?
No. The product listing identifies MC33399DR2 as RoHS non-compliant. This declaration should be handled carefully for new designs and export-related documentation because RoHS status can vary by region, date, and exact ordering code. If restricted-substance compliance is required, request current documentation for the exact MC33399DR2 configuration and consider a compliant replacement only after completing functional and lifecycle review.

エンジニアリング参考データ: MC33399DR2 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MC33399DR2 when an existing LIN node specifically requires the NXP 1/1 transceiver in an 8-SOIC outline with an automotive temperature-grade classification and its documented electrical characteristics. Because the device is obsolete, selection should include a lifecycle and traceability review rather than treating the part as a routine new design choice. MC33171DR2 is the relevant 8-SOIC comparison candidate when a second source is required, but verify pin mapping, voltage range, power consumption, logic thresholds, and bus behavior before approving it. Do not choose MC33269DR2-5.0G as a direct replacement because it is a voltage regulator rather than a LIN transceiver. For new designs, compare current LIN physical-interface options as well as this legacy device so that electrical, package, temperature, and sourcing requirements are satisfied together.

代替品との比較

パラメータ この製品 MC33171DR2
Package 8-SOIC 8-SOIC
Brand NXP Semiconductors NXP Semiconductors
Device Type LIN-bus transceiver LIN-bus transceiver
Terminal Count 8 8

主な差別化要因

  • Directly identified automotive-grade LIN physical interface (vs MC33171DR2)
  • Confirmed eight-pin surface-mount implementation (vs MC33171DR2)
  • Clear separation between network interface and protocol processing (vs MC33269DR2-5.0G)

設計ノート

Build the bus-facing network around the manufacturer’s recommended application circuit and pin-description table. Keep the LIN connection short, maintain the prescribed grounding relationship between transceiver and host controller, and reserve space for the required protection components. Although the MC33399DR2 uses an 8-SOIC, an eight-pin package does not establish pin compatibility with another transceiver; verify every numbered terminal against the exact device.

Confirm supply voltage, current, logic thresholds, and maximum input voltage from the manufacturer datasheet before enabling the bus interface. The device is described as a 1/1 LIN transceiver, but those confirmed electrical limits are not stated here and must not be inferred from the package classification. Use the host microcontroller’s absolute maximum ratings and the automotive module’s supply architecture to define safe component tolerances and startup sequencing.

Do not substitute MC33269DR2-5.0G for MC33399DR2 merely because both appear in an 8-SOIC comparison. The former is described as a voltage regulator, not a LIN physical interface, and may therefore have a fundamentally different pinout and circuit role. Likewise, confirm that MC33171DR2 matches every externally connected function before treating it as a drop-in alternative.

Evaluate the SOIC-8 thermal path using the package dimensions, copper area, surrounding airflow, and the final board assembly. The MC33399DR2 is identified with an automotive temperature grade, but the exact junction-temperature and ambient-temperature limits require confirmation from the manufacturer datasheet. Validate the assembled module at worst-case supply, bus activity, and ambient conditions rather than relying on component category alone.

コンプライアンス情報

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product listing explicitly identifies MC33399DR2 as RoHS non-compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are established. The automotive temperature grade must not be treated as proof of AEC-Q100 qualification.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MC33399DR2 datasheet MC33399DR2 pinout MC33399DR2 datasheet pdf MC33399DR2 8-SOIC MC33399DR2 LIN transceiver MC33399DR2 price MC33399DR2 stock MC33399DR2 equivalent MC33399DR2 replacement MC33399DR2 vs MC33171DR2 NXP MC33399DR2 MC33399DR2 automotive LIN

関連部品&用語

NXP Semiconductors Freescale Semiconductor MC33399DR2 MC33171DR2 MC33269DR2-5.0G LIN bus LIN physical-layer interface 1/1 transceiver interface IC wired network transceiver automotive electronics 8-SOIC SOIC family surface-mount package gull-wing terminal microcontroller body-control module sensor gateway automotive temperature grade RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示