MC33399DR2 - LIN Bus 1/1 Transceiver | NXP Semiconductors
MPN: MC33399DR2 ✗ סוף ייצורMC33399DR2 סקירה
A LIN physical-layer interface is a communications IC used in low-cost, single-wire vehicle networks. LIN belongs to the broader hierarchy of interface ICs, where a physical-layer transceiver sits between a host microcontroller and an external bus. The MC33399DR2 is used where one node must exchange LIN signals with the network while the host processor handles higher-level tasks such as framing, diagnostics, and application data.
The MC33399DR2 is identified as a half LIN-bus transceiver with one transmitter and one receiver. It is offered in an 8-SOIC package with a rectangular package body and gull-wing terminal form. The automotive temperature-grade classification is important for engineers evaluating the part for vehicle electrical environments. The exact operating voltage, current consumption, data rate, logic thresholds, and protection ratings should be confirmed from the manufacturer datasheet before final circuit release.
Its principal engineering value is a dedicated physical interface that separates network communication from the host microcontroller. This division of responsibility allows the controller software to operate at the protocol layer while the transceiver handles bus-facing signal transmission and reception. The 8-SOIC outline also supports compact mixed-signal and automotive-control layouts, although exposed-pin clearance, soldering profile, and thermal performance still require normal SOIC assembly practices.
Typical applications include LIN-based vehicle body controllers, door and seat modules, climate-control peripherals, lighting controls, switches, sensor interfaces, and other distributed nodes that use a one-wire LIN network. In these systems, the transceiver provides the physical connection while a microcontroller handles command interpretation and bus scheduling. The MC33399DR2 can also serve as a development interface when reproducing LIN-network behavior in automotive electronics prototypes.
For layout, keep the LIN bus connection and its protection network away from sensitive analog and high-speed digital traces. Follow the pin-description and recommended-application diagrams in the manufacturer datasheet when assigning pins and selecting external components. Verify the exact package drawing and land pattern against the MC33399DR2 ordering information rather than relying on a generic 8-SOIC footprint.
This product page combines the confirmed LIN transceiver classification, 8-SOIC package information, source traceability, sourcing guidance, and application-focused engineering guidance. It also separates confirmed product attributes from parameters that still require confirmation during schematic and qualification work, helping designers move from part identification to a controlled design review.
חלופות תחליף ישיר עבור MC33399DR2 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MC33171DR2
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC33399DR2 מפרטים
| Device Type | 1/1 LIN-bus transceiver |
| LIN Interface Type | Half LIN-bus physical-layer interface |
| Manufacturer | NXP Semiconductors |
| מארז | 8-SOIC |
| Number of Terminals | 8 |
| Terminal Form | Gull wing |
| Package Code | SOP |
| Package Shape | Rectangular |
| Temperature Grade | Automotive |
| Transmitter Count | 1 |
| Receiver Count | 1 |
| סוג הרכבה | Surface mount |
| סטטוס RoHS | RoHS non-compliant |
מדריך תצורת פינים של MC33399DR2 rectangular
תצורת פינים עבור MC33399DR2 (מארזת rectangular). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MC33399DR2.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC33399DR2 מתאים עבור 6 יישוםs: Automotive LIN Body-Control Node, Vehicle Door and Seat Module, LIN Climate-Control Peripheral, Automotive Switch and Lighting Controller, LIN Sensor Gateway, Automotive Electronics Test Interface.
Automotive LIN Body-Control Node
The MC33399DR2 fits an automotive LIN body-control node because it provides one transmitter and one receiver in an 8-SOIC package and is identified with an automotive temperature-grade classification. A host microcontroller handles command decoding, diagnostics, and application logic, while the transceiver connects those functions to the LIN bus. The 8-pin surface-mount outline supports compact controller boards, but the layout must follow the manufacturer pin-description and application diagrams. Verify the exact supply limits, bus-voltage tolerance, and automotive temperature range before releasing the schematic. The MC33399DR2 is suitable only when the confirmed ordering code satisfies the vehicle program’s electrical and sourcing requirements.
Vehicle Door and Seat Module
A door, seat, or access module can use the MC33399DR2 as the LIN physical interface between a local microcontroller and the vehicle network. Its one-transmitter, one-receiver arrangement separates bus signaling from the controller’s protocol processing, while the 8-SOIC package provides a compact eight-terminal implementation. The confirmed automotive temperature-grade classification supports evaluation for vehicle environments. During design review, compare the manufacturer’s bus and logic specifications with the host MCU levels and confirm protection requirements for the cable-connected network. Because the MC33399DR2 is obsolete, use the Quote Request form on this page to establish whether traceable supply can support the intended production interval.
LIN Climate-Control Peripheral
The MC33399DR2 can serve as the network interface in a climate-control peripheral that exchanges commands and sensor information through LIN. The 1/1 transceiver provides the physical transmitter and receiver paths, allowing the microcontroller to manage temperature measurements, fan requests, and button events without implementing the bus driver directly. Its 8-SOIC package is practical for compact automotive accessory controllers. Confirm the interface voltage range, supply current, and operating-temperature limits in the manufacturer datasheet, and use the recommended external network components unchanged unless the complete design receives separate engineering approval. This role also makes the MC33399DR2 suitable for prototype systems that reproduce LIN communication behavior during module validation.
Automotive Switch and Lighting Controller
For a LIN-connected switch or lighting controller, the MC33399DR2 offers one transmitter and one receiver in an eight-terminal SOIC outline. A microcontroller can encode switch position or lighting commands while the transceiver communicates them over the single-wire LIN network. The compact package and automotive temperature-grade designation are useful attributes for distributed vehicle electronics, while the host controller handles debouncing, diagnostics, and lighting state. Pin mapping, logic thresholds, and bus protection must be verified against the manufacturer documentation because package equivalence alone does not establish interchangeability. For production continuity, request current traceability and lot-level availability through the Quote Request form on this page.
LIN Sensor Gateway
The MC33399DR2 can form the LIN communication section of a sensor gateway in which a microcontroller aggregates measurements and publishes them to a LIN master. The device’s one transmitter and one receiver provide a compact physical interface, while the 8-SOIC package leaves board area for sensing and conditioning circuitry. Because LIN transceivers connect to an external wired network, the schematic and PCB should follow the manufacturer’s bus, ground, and protection recommendations. Confirm the maximum bus voltage, operating-temperature range, and supply-current behavior before deployment. The obsolete lifecycle status makes lifecycle planning essential; the Quote Request form can establish current supply and lead-time options for an exact quantity.
Automotive Electronics Test Interface
The MC33399DR2 can be used in a LIN interface test fixture that lets a controller or test system exercise communication with a physical LIN network. Its one transmitter and one receiver support bidirectional bus signaling, and the 8-SOIC package permits straightforward connection to a small test PCB. The interface circuit should be based on the manufacturer application diagram so that bus termination, protection, and grounding match the intended network. During prototype validation, monitor the target’s logic thresholds and supply behavior rather than relying only on its LIN classification. When sourcing additional units for a complete fixture, use the Quote Request form on this page and request current availability and lead time.
נתוני עזר הנדסיים עבור MC33399DR2 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC33171DR2 |
|---|---|---|
| Package | 8-SOIC | 8-SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Device Type | LIN-bus transceiver | LIN-bus transceiver |
| Terminal Count | 8 | 8 |
מבדילים עיקריים
- Directly identified automotive-grade LIN physical interface (לעומתMC33171DR2)
- Confirmed eight-pin surface-mount implementation (לעומתMC33171DR2)
- Clear separation between network interface and protocol processing (לעומתMC33269DR2-5.0G)
הערות תכנון
Build the bus-facing network around the manufacturer’s recommended application circuit and pin-description table. Keep the LIN connection short, maintain the prescribed grounding relationship between transceiver and host controller, and reserve space for the required protection components. Although the MC33399DR2 uses an 8-SOIC, an eight-pin package does not establish pin compatibility with another transceiver; verify every numbered terminal against the exact device.
Confirm supply voltage, current, logic thresholds, and maximum input voltage from the manufacturer datasheet before enabling the bus interface. The device is described as a 1/1 LIN transceiver, but those confirmed electrical limits are not stated here and must not be inferred from the package classification. Use the host microcontroller’s absolute maximum ratings and the automotive module’s supply architecture to define safe component tolerances and startup sequencing.
Do not substitute MC33269DR2-5.0G for MC33399DR2 merely because both appear in an 8-SOIC comparison. The former is described as a voltage regulator, not a LIN physical interface, and may therefore have a fundamentally different pinout and circuit role. Likewise, confirm that MC33171DR2 matches every externally connected function before treating it as a drop-in alternative.
Evaluate the SOIC-8 thermal path using the package dimensions, copper area, surrounding airflow, and the final board assembly. The MC33399DR2 is identified with an automotive temperature grade, but the exact junction-temperature and ambient-temperature limits require confirmation from the manufacturer datasheet. Validate the assembled module at worst-case supply, bus activity, and ambient conditions rather than relying on component category alone.
מידע על תאימות
The product listing explicitly identifies MC33399DR2 as RoHS non-compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are established. The automotive temperature grade must not be treated as proof of AEC-Q100 qualification.