MC33742DW - 5V CAN 2.0 System Basis Chip | NXP
部品番号: MC33742DW ✗ 生産終了MC33742DW 概要
A System Basis Chip, or SBC, is a mixed-signal semiconductor that consolidates functions commonly required in embedded control systems. The MC33742 combines power regulation, reset supervision, serial control, and CAN physical-layer communication in one package. Within the automotive electronics hierarchy, this device belongs to the interface-IC and power-management categories and reduces the component count required around a host microcontroller or DSP.
Key functions include a fixed 5.0 V low-dropout regulator, CAN 2.0-compliant transceiver operation, SPI configuration, reset generation, current limiting, and overtemperature prewarning. The internal regulator is described as fully protected, making it suitable for systems where load transients and thermal conditions must be handled close to the vehicle power network. The 28-SOIC package also supports conventional surface-mount manufacturing and inspection processes.
Technically, the MC33742 is a SMARTMOS device whose integrated functions are controlled through an SPI interface. The CAN transceiver provides the physical communication layer, while the internal regulator supplies a fixed 5.0 V rail to the associated control electronics. Combining these functions can simplify ECU power architecture, reduce wiring, and standardize reset and communication behavior across modules that must operate in electrically harsh environments.
Typical applications include automotive engine-control modules, transmission controllers, body-control modules, climate-control ECUs, seat and door controllers, sensor nodes, and CAN-based industrial control equipment. It is particularly relevant where a 5.0 V regulated rail, deterministic reset behavior, and CAN connectivity are required on the same controller board.
Designers should follow the manufacturer pin-description and application information when assigning tracks, bypass capacitance, transceiver connections, and power-dissipation copper. The fixed 5.0 V output must match downstream logic requirements, and the board layout should preserve the intended thermal and signal-return paths around the 28-pin SOIC device.
This product page combines the NXP manufacturer datasheet information with distributor identification, package details, application guidance, and engineering-oriented design notes. It also identifies the limits of available drop-in substitution information so engineers can distinguish verified same-package options from parts that would require board redesign.
ドロップイン代替品: MC33742DW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC33742DW (同一形状・フットプリント) — 相違点: CAN Standard, Internal Regulator Output, Package, RoHS Status.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC33742DW 仕様
| Device Type | SPI-controlled System Basis Chip |
| CAN Standard | CAN 2.0 |
| Internal Regulator Output | Fixed 5.0 V |
| Regulator Topology | Low-dropout regulator |
| Host Interface | SPI |
| Integrated Reset | Yes |
| Regulator Current Limit | Integrated |
| Overtemperature Prewarning | Integrated |
| パッケージ | 28-pin SOIC |
| 実装タイプ | Surface mount |
| Device Technology | SMARTMOS |
| Automotive CAN Network Support | Yes |
| RoHS ステータス | unknown |
| REACH Status | unknown |
MC33742DW 28-pin soic ピン配置ガイド
MC33742DW (28-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MC33742DW.
詳細は データシート をご参照ください。
主な用途
MC33742DW の用途: 6 件s: Automotive Engine Control Module, Body Control Module, Automotive Transmission Controller, CAN-Based Sensor Node, Industrial CAN Controller, Climate Control ECU.
Automotive Engine Control Module
MC33742DW fits an automotive ECU that requires a local 5.0 V rail and CAN network connectivity around a host processor. The fixed low-dropout regulator supplies the logic rail, while the integrated current limiting and overtemperature prewarning add local protection around that supply. Its CAN 2.0 transceiver connects the controller to sensors and actuators distributed through the vehicle network. SPI configuration allows the host to manage device functions, while the integrated reset helps establish a controlled operating state. The 28-SOIC surface-mount package reduces discrete component count and supports automated PCB assembly. Final qualification must include confirmation of temperature limits, transient requirements, and the exact regulator-load conditions for the selected ECU architecture.
おすすめ
Body Control Module
A body control module can use MC33742DW to consolidate its regulated 5.0 V supply, supervised reset, SPI host interface, and CAN 2.0 communications. This arrangement suits distributed door, lighting, seat, and climate-control subsystems that exchange commands through a vehicle CAN network. The protected internal regulator includes current limiting and overtemperature prewarning, making it useful where downstream load behavior is not completely predictable. SPI control allows the module's microcontroller to configure and monitor the basis-chip functions through a compact serial interface. The monolithic 28-SOIC implementation also simplifies connector planning and board partitioning. Engineers should still calculate worst-case regulator dissipation and provide adequate copper around the package for their selected ambient temperature and load profile.
おすすめ
Automotive Transmission Controller
MC33742DW is suitable for a transmission-control ECU requiring reliable CAN communication and a fixed 5.0 V processor rail. The CAN 2.0 transceiver provides the physical network interface, while the low-dropout regulator, reset, current limiting, and overtemperature prewarning consolidate power-management functions into the same controller board. SPI access supports host-controlled operation without dedicating numerous discrete interface pins. In this application, the integration can shorten interconnects and reduce board area in an environment where the ECU coordinates sensors, actuators, and diagnostic communication. Layout should prioritize short regulator paths, a stable ground reference, and controlled CAN routing. Thermal and transient suitability must be validated against the transmission housing environment and the final vehicle power-network specification.
おすすめ
CAN-Based Sensor Node
A compact CAN sensor node can use MC33742DW when the node requires a regulated 5.0 V rail, host reset supervision, and network communication within one controller assembly. The SPI interface lets a microcontroller or DSP configure the System Basis Chip, while the CAN 2.0 transceiver connects the node to a wider monitoring or control network. Integrated current limiting and overtemperature prewarning are useful for unattended remote modules because they add local supervision around the regulator. The 28-SOIC package supports conventional reflow assembly without requiring a specialized land pattern. When designing the node, confirm the maximum regulator load, cable and transient environment, grounding strategy, and thermal rise. The device should be selected only when its published operating limits provide adequate margin for the remote installation.
おすすめ
Industrial CAN Controller
MC33742DW can support compact industrial controllers that exchange data over a CAN 2.0 network and require a fixed 5.0 V logic supply. The integrated low-dropout regulator, reset, SPI control, current limiting, and overtemperature prewarning provide a useful foundation for machinery-control, test-equipment, or building-automation nodes. The monolithic approach can reduce component count when compared with separate regulator, reset, and CAN-interface devices. Because the device was designed around automotive ECU requirements, industrial users should verify operating temperature, isolation needs, surge exposure, grounding strategy, and regulatory requirements against the NXP datasheet. The PCB should separate CAN routing from sensitive measurement circuits and provide appropriate input filtering determined by the end application's electromagnetic environment.
おすすめ
Climate Control ECU
MC33742DW fits a climate-control ECU that coordinates fan, compressor, temperature-sensor, and user-interface functions over a CAN network. Its fixed 5.0 V regulator provides the local logic rail, and the integrated reset establishes a controlled startup state for the control electronics. SPI control permits the host processor to configure the System Basis Chip, while CAN 2.0 connectivity links the module with other vehicle controllers. The consolidated functions can reduce the number of supporting components and shorten critical power traces on a crowded ECU board. Designers should ensure the regulator can support the module's peak logic load, provide adequate copper for dissipation, and observe the manufacturer's component layout recommendations. CAN termination and protection requirements must be evaluated independently of the on-chip transceiver.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC33742DW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 28-pin SOIC |
| Device Type | SPI-controlled System Basis Chip |
| CAN Standard | CAN 2.0 |
| Internal Regulator Output | Fixed 5.0 V |
| Regulator Topology | Low-dropout regulator |
| Host Interface | SPI |
| Integrated Protection | Current limiting and overtemperature prewarning |
| Reset Function | Integrated |
| Device Technology | SMARTMOS |
主な差別化要因
- Combines CAN, regulated power, reset, and host control (vs Discrete CAN and regulator implementation)
- Fixed 5.0 V integration supports controller power consolidation (vs Adjustable regulator solution)
- Automotive-oriented ECU architecture (vs Basic CAN transceiver only)
設計ノート
Place the regulator input capacitor, regulator output capacitor, and required transceiver bypass components directly beside their associated IC pins. Keep the 5.0 V distribution path short and use a low-impedance ground connection so the internal regulator and SPI interface operate against a stable reference. Follow the NXP application circuit and pin-description table for exact capacitor values and permitted alternatives.
Estimated: calculate dissipation with P = (VIN - 5.0 V) × ILOAD using the maximum VIN and peak load for the design. The regulator is fixed at 5.0 V, so headroom and load determine dissipation. Use the result to size copper around the 28-SOIC and verify that the estimated junction temperature remains below the device limit stated in the manufacturer datasheet.
Route the CAN bus and SPI signals away from noisy power-conversion nodes, and provide a continuous ground reference beneath signal paths where practical. Keep external protection and termination components close to the connector or transceiver interface. Differential CAN routing should preserve symmetry and controlled spacing because geometry affects signal integrity and electromagnetic emissions.
Do not treat SPI-compatible functional blocks as permission to substitute a different package or pinout. Verify every assigned pin against the MC33742 manufacturer datasheet, including reset, regulator, transceiver, and exposed supply connections. Also confirm that the downstream logic requires exactly 5.0 V; the internal regulator is fixed and is not an adjustable output.
コンプライアンス情報
The manufacturer datasheet describes automotive ECU use, but the available records do not explicitly state the requested environmental-compliance declarations.