NXP Semiconductors

MC33794DH - Electric Field Imaging Sensor Interface | NXP

部品番号: MC33794DH ✓ 生産中
7 mA Vdss 44-HSOP Package 120 kHz Speed
MOQ: 1 |

MC33794DH 概要

The NXP Semiconductors MC33794DH is an electric field imaging device and sensor interface IC designed for noncontact object detection. The device generates a low-frequency sine wave, applies it through external electrodes, and evaluates changes in the resulting electric field. It features logic input and logic output interfaces, a 7 mA supply current, and a 44-HSOP package with an exposed pad. Its operating frequency is adjustable with an external resistor and is optimized for 120 kHz.

An electric field imaging sensor interface is a specialized form of sensor interface IC used to connect an analog sensing structure to digital control and measurement electronics. The MC33794DH sits between external electrodes and a host processor or controller: it excites the electrodes, processes the field response, and communicates the detection result through logic-level signals. This category combines capacitive or electric-field sensing, excitation control, signal conditioning, and digital interfacing in one dedicated semiconductor.

The principal features include noncontact sensing, externally adjustable excitation frequency, logic-level input and output, low 7 mA supply current, and operation around a 120 kHz-optimized excitation point. The 44-HSOP package provides 44 external leads and an exposed thermal pad. The exposed pad supports heat transfer from the IC, while the wide-bodied package gives the external electrode and signal-routing connections adequate separation for a high-voltage sensing interface.

The internal operating concept is based on driving an electric field through connected electrodes and detecting the response produced when an object enters or leaves that field. The low-frequency sine-wave excitation provides the sensing energy, while the adjustable frequency allows the interface to be tuned for a particular electrode geometry, target dielectric characteristic, or measurement environment. Because the excitation frequency is established with an external resistor, component tolerance, parasitic capacitance, electrode area, and proximity to metal structures should be considered during circuit optimization.

Typical uses include touchless control panels, occupancy detection, liquid-level sensing, appliance controls, proximity sensing, and embedded capacitive measurement systems. The IC is especially useful when a design must detect a dielectric object without mechanical contact, where moving parts would be undesirable, or where contamination on a traditional sensing surface could affect reliability. External electrode design and calibration remain central to obtaining repeatable results.

A key design consideration is the separation between the high-voltage sensing interface and sensitive logic. Use the manufacturer pin-description table and recommended application schematic when assigning every pin, especially power, electrode outputs, logic inputs, and logic outputs. Place the frequency-setting resistor close to its specified device pin, provide stable supply decoupling, and route electrode connections away from sensitive analog and digital paths. The exposed pad must follow the manufacturer’s thermal and electrical land-pattern guidance.

This product record combines the electric-field sensing function, verified package and interface characteristics, sourcing information, and practical implementation guidance. It is intended to help engineers evaluate whether the MC33794DH fits a noncontact sensing architecture while recognizing that electrode geometry, frequency tuning, isolation, and application-specific calibration determine the achievable measurement performance.

ドロップイン代替品: MC33794DH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

MC33794DH 最大定格&電気的特性

Device Type Electric field imaging device and sensor interface IC
Manufacturer NXP Semiconductors
Primary Function Noncontact electric-field object detection
Excitation Signal Low-frequency sine wave
Optimized Excitation Frequency 120 kHz
Frequency Adjustment External resistor
電源電流 7 mA
Input Interface Logic input
Output Interface Logic output
Sensor Interface ISO9141
パッケージ 44-HSOP
パッケージ / ケース 44-BSSOP, 11.00 mm width, exposed pad
Lead Count 44 leads
実装タイプ Surface mount
Packaging Tube

MC33794DH 44-bssop, 11.00 mm width, exposed pad ピン配置ガイド

MC33794DH (44-bssop, 11.00 mm width, exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MC33794DH の 44-bssop, 11.00 mm width, exposed pad パッケージピン配置図

詳細なピン配置データはありません: MC33794DH.

詳細は データシート をご参照ください。

主な用途

MC33794DH の用途: 8 件s: Noncontact Touch Control, Appliance User Interfaces, Occupancy Detection, Liquid Level Sensing, Proximity Sensing, Dielectric Object Recognition, Industrial Presence Sensing, Smart Home Control Surface.

📱

Noncontact Touch Control

The MC33794DH fits a noncontact touch-control panel in which external electrodes create an electric field and a user approaches the sensing surface without mechanically touching it. Its logic output can report a detection event to a controller, while the adjustable low-frequency sine-wave excitation allows the circuit to be tuned around a 120 kHz-optimized operating point. The 7 mA supply current helps keep the sensing subsystem power demand controlled. Successful implementation still depends on electrode geometry, target dielectric properties, PCB isolation, and calibration because the IC detects a change in the complete field structure rather than a single fixed capacitance.

🏭

Appliance User Interfaces

The MC33794DH can support touch-free controls in household appliances where sealed panels, wear resistance, or hygienic operation matters. External electrodes placed behind a nonconductive panel allow the device to sense a finger or object approaching the user interface without exposing electrical contacts. The adjustable excitation frequency provides a tuning mechanism for the panel material and electrode geometry, while the logic interface supports connection to a control MCU. The design must account for the dielectric contribution of the panel and verify detection repeatability across the complete temperature and humidity range intended for the appliance.

🧩

Occupancy Detection

MC33794DH-based occupancy sensing can detect when a person enters or leaves a defined field, allowing equipment to operate only when space is occupied. The external electrodes establish the sensing region, and the IC’s active sine-wave excitation and logic output provide a compact interface for a controller. The 44-HSOP exposed-pad package supports thermal dissipation in a compact assembly, while the stated 7 mA supply current is useful when power budgeting a low-power monitoring subsystem. Deployment should include tests with stationary objects, moving people, adjacent metal structures, and the intended furniture because these factors can reshape the electric field and change detection sensitivity.

⚡

Liquid Level Sensing

The MC33794DH is suitable for exploratory noncontact liquid-level sensing where the liquid changes the dielectric or field conditions around an electrode structure. Because the device actively excutes the field and evaluates its response, it can form the sensing front end of a level-detection system rather than relying only on a passive capacitance measurement. The externally adjustable excitation permits tuning for the electrode arrangement and fluid interface. A production design should validate conductivity, container material, fill rate, temperature, and calibration drift, because the relationship between field response and liquid level depends on the complete physical system.

⚡

Proximity Sensing

A MC33794DH proximity sensor can detect objects approaching a sealed surface without exposing a conventional mechanical switch or exposed capacitive electrode. The sensor interface generates an adjustable low-frequency sine wave, drives external electrodes, and reports the sensed condition through a logic output. This arrangement is useful for automatic doors, cabinet controls, protective covers, and compact products where a mechanical opening may be undesirable. Sensitivity and selectivity depend strongly on electrode dimensions and nearby conductive objects, so the physical installation should be modeled and calibrated rather than copied without adjustment.

🔧

Dielectric Object Recognition

The MC33794DH can support dielectric object recognition when different target materials create distinguishable electric-field responses. Its adjustable excitation frequency gives the designer a way to tune the sensing condition for a particular electrode geometry and target, while logic-level signaling allows a controller to apply thresholds or classification rules. Compared with a simple fixed threshold detector, this arrangement can be refined through hardware tuning and firmware evaluation. Reliable recognition requires repeatable target orientation, controlled electrode spacing, and environmental compensation; the IC supplies the excitation and interface function but does not eliminate the need for application-specific characterization.

🏭

Industrial Presence Sensing

MC33794DH-based presence sensing can support industrial controls that need to detect hands, tools, or workpieces without relying on exposed contacts. The external-electrode architecture permits the sensing surface to be separated from the electronics, and the logic output provides a straightforward signal for a machine controller. Its 7 mA stated supply current is helpful in equipment where the sensing subsystem must coexist with a larger power budget, while the exposed pad assists heat transfer in the 44-HSOP assembly. For industrial use, validate detection against conductive fixtures, lubricants, debris, temperature changes, and the grounding conditions of the machine because all can alter field coupling.

🧩

Smart Home Control Surface

The MC33794DH can implement a concealed smart-home control surface by placing electrodes beneath a decorative panel and using the IC to detect a nearby touch. This avoids mechanical switches and can support clean, flush interfaces on kitchen appliances, cabinetry, or wall controls. The 120 kHz-optimized and externally adjustable excitation provides a basis for tuning the electrode network to the chosen panel material. A practical deployment should evaluate false triggers from moisture, moving conductive objects, and neighboring equipment. Firmware can apply thresholds and timing rules, but stable field behavior begins with controlled electrode geometry and careful grounding of the exposed-pad structure.

What is the MC33794DH used for?
The MC33794DH is used for noncontact object detection through an electric-field sensing arrangement. According to the NXP manufacturer datasheet, external electrodes create an electric field, and the IC detects objects that enter or disturb that field. The device generates a low-frequency sine wave and provides logic input and logic output interfaces, making it suitable for touch controls, occupancy sensing, appliance interfaces, and other systems requiring contact-free detection.
What type of sensor interface is the MC33794DH?
The MC33794DH is an electric field imaging device and sensor interface IC with logic input and logic output interfaces. The NXP manufacturer datasheet identifies it as a dedicated circuit for noncontact detection of objects using external electrodes. Unlike a conventional passive capacitive sensor, this IC actively excites the electric field and processes the resulting response, providing a more integrated interface between the sensing electrodes and downstream control electronics.
How is the MC33794DH excitation frequency adjusted?
The MC33794DH excitation frequency is adjusted with an external resistor. The NXP manufacturer datasheet states that the internal low-frequency sine-wave generator is optimized for 120 kHz and allows frequency adjustment through an external resistance. Component tolerance, electrode capacitance, PCB parasitics, and the physical dimensions of the sensing electrodes can affect the final operating point, so the application circuit should be tuned with those interactions in mind.
What is the supply current of the MC33794DH?
The MC33794DH has a specified supply current of 7 mA. This value comes from the NXP manufacturer datasheet and applies to the device’s active operating conditions. When designing a power rail, use 7 mA as the stated device current and confirm the full operating-voltage range and any additional application-specific requirements against the manufacturer’s electrical characteristics before finalizing the power budget.
What package does the MC33794DH use?
The MC33794DH uses a 44-HSOP package with an exposed pad, also described as a 44-BSSOP case measuring approximately 11.00 mm wide. The device has 44 external leads and is supplied in a tube according to the product listing. Its exposed pad requires the land pattern, thermal treatment, and electrical connection specified in the NXP manufacturer datasheet rather than an improvised generic footprint.
Where can I download the MC33794DH datasheet PDF?
The MC33794DH datasheet PDF is available from the NXP manufacturer documentation through the MC33794 electric field imaging device datasheet. Use the manufacturer’s PDF for the authoritative pin descriptions, electrical characteristics, recommended application circuit, exposed-pad connection, and operating limits. The product datasheet field on this page links directly to the MC33794 PDF, while the pin-description table should be used to assign all 44 leads before PCB routing.
Where can I find the MC33794DH pinout?
The MC33794DH pinout is defined by the pin-description table and package drawing in the NXP manufacturer datasheet for the 44-HSOP package. The package has 44 leads and an exposed pad, so the exposed thermal or electrical pad must be distinguished from the numbered external pins. Use the manufacturer numbering shown on the package drawing when assigning electrodes, supply pins, frequency-setting components, and logic signals to the PCB footprint.
Is the MC33794DH suitable for noncontact touch controls?
Yes, the MC33794DH is suitable for noncontact touch controls because its electric-field sensing function detects objects without mechanical contact. The NXP manufacturer datasheet identifies noncontact sensing as the intended operating principle, and the device includes logic interfaces suitable for connection to a controller. Actual sensitivity depends on electrode geometry, target material, excitation tuning, environmental coupling, and the calibration procedure used in the final application.
What is the best drop-in replacement for the MC33794DH?
The best drop-in replacement must use the same 44-HSOP footprint, preserve pin-to-pin assignments, and maintain compatible excitation, supply, and logic-interface behavior. No verified drop-in substitute is identified for the MC33794DH, so an engineer should not install a merely similar sensor interface without checking every pin and electrical characteristic. Use the NXP cross-reference service and the manufacturer application circuit to validate any proposed replacement before committing it to a PCB.
Can another electric-field sensor IC replace the MC33794DH?
Another electric-field sensor IC can replace the MC33794DH only after confirming mechanical, electrical, and behavioral compatibility. A valid substitute needs the same 44-HSOP land pattern, corresponding electrode and logic pins, a compatible supply range, and equivalent frequency-adjustment behavior. No verified pin-compatible replacement is established for this device, so function-level similarity alone does not qualify as a drop-in replacement.
When should I choose the MC33794DH over a conventional capacitive sensor?
Choose the MC33794DH when the design benefits from an integrated excitation and detection function rather than a passive electrode alone. Its low-frequency sine-wave excitation, externally adjustable frequency, and logic output provide a dedicated interface for noncontact object detection. A conventional capacitive front end may suit applications with simpler signal processing, while the MC33794DH is preferable when the manufacturer’s sensing architecture and calibration approach can be implemented directly.
Is the MC33794DH the same as a generic ISO9141 interface IC?
The MC33794DH is identified as an ISO9141 sensor interface with logic input and logic output, but it also performs the active electric-field imaging function described in the NXP manufacturer datasheet. It should not be treated as a generic communications transceiver. The external electrodes, adjustable sine-wave excitation, and dedicated sensing algorithm distinguish this device from ordinary ISO9141 interface circuits.
Where can I buy MC33794DH online?
MC33794DH can be requested through the Request a Quote form on this page, where the exact suffix, quantity, packaging, and delivery requirements should be stated. The device is listed as a 44-HSOP sensor interface IC and is also described in tube packaging. Confirm current stock, lead time, minimum order quantity, and authorized-channel status through the request workflow before releasing a production order.
What is the price of the MC33794DH?
The current MC33794DH price is shown through the Request a Quote form on this page and can change with quantity, packaging, availability, and market conditions. The Request a Quote form is the appropriate route for a firm commercial response because it captures the required part number, quantity, and delivery terms. No fixed price should be assumed for planning until a current quotation has been returned.
What is the lead time and stock status for the MC33794DH?
Current MC33794DH lead time and stock status should be confirmed through the Request a Quote form on this page. The manufacturer’s product information and distribution records should be checked for the exact MC33794DH suffix and tube packaging before production commitments are made. A responsive procurement response will establish available quantity, manufacturing lead time, minimum order quantity, and the applicable delivery schedule.
What are the key specifications of the MC33794DH that engineers should know?
The key MC33794DH specifications are its 7 mA supply current, adjustable low-frequency sine-wave excitation optimized for 120 kHz, logic input and logic output interfaces, and 44-HSOP package with an exposed pad. The NXP manufacturer datasheet also identifies it as an ISO9141 sensor interface intended for noncontact object detection. These features define its role as an active electric-field sensing controller rather than a passive sensor.

エンジニアリング参考データ: MC33794DH — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MC33794DH when the design requires an integrated, active electric-field sensing function for noncontact object detection. It is especially relevant when the sensing electrodes can be connected directly to the device, the excitation can be tuned with an external resistor around the manufacturer’s recommended circuit, and a controller can use the logic output. The 44-HSOP exposed-pad package provides a defined mechanical and thermal implementation route, while the 7 mA stated supply current supports low-power sensing subsystems. No verified pin-compatible alternative is established, so the MC33794DH should remain the primary choice unless the manufacturer publishes a compatible suffix or a replacement is independently validated. Before committing, confirm the supply limits, complete 44-pin assignments, operating temperature, and all electrical characteristics from the manufacturer datasheet. If the application instead needs a passive capacitive electrode or a different sensing physics, use a front end designed for that approach rather than forcing an interface with a similar function but different electrode requirements.

代替品との比較

パラメータ この製品
Brand NXP Semiconductors
Package 44-HSOP with exposed pad
Device Type Electric field imaging device and sensor interface IC
Supply Current 7 mA
Excitation Signal Low-frequency sine wave
Optimized Frequency 120 kHz
Frequency Adjustment External resistor
Input Interface Logic input
Output Interface Logic output
Sensor Interface ISO9141
Lead Count 44 leads
Packaging Tube

設計ノート

Keep the external-electrode network and its associated routing physically separate from sensitive logic and low-level sensing paths. The sensing electrodes interact with stray capacitance, ground planes, cables, enclosure metal, and adjacent circuitry, so moving a trace or changing a ground reference can alter the response. Follow the manufacturer application layout, minimize exposed sensing-node area, and evaluate the complete installed enclosure because PCB-level geometry alone does not determine the final field behavior.

Do not treat the adjustable excitation as a free-running timing function. The external resistor influences an operating point optimized around 120 kHz, and tolerance, electrode capacitance, target materials, and PCB parasitics can shift the usable response. Select the resistance from the manufacturer guidance, measure the chosen network in its final mechanical assembly, and calibrate detection thresholds using expected targets and worst-case environmental conditions instead of relying on a bench setup with no enclosure.

Use the exposed pad according to the NXP manufacturer package drawing and recommended land pattern. The exposed pad can provide electrical as well as thermal functions, so it must not be left unconnected unless the application guidance specifically permits that arrangement. Provide a stable ground reference and adequate copper for heat spreading, inspect solder fillet quality after assembly, and verify the operating temperature at the hottest expected ambient condition. The 7 mA supply-current specification does not include heat contributed by external sensor-node loading.

Design the supply path for a 7 mA sensing IC while accounting separately for the external electrode network and any downstream logic. Use the manufacturer's specified supply range and bypass requirements rather than inferring them from the package or interface type. A quiet and stable supply reference helps preserve repeatable field measurements. If the sensing electrodes require additional circuitry, include its current, protection requirements, and startup behavior in the complete power budget instead of sizing the rail from the MC33794DH current alone.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified for MC33794DH in the manufacturer and distributor product information. The manufacturer product page and current compliance declarations should be checked for the exact device revision before a regulated production release.

関連検索

MC33794DH datasheet MC33794DH pinout MC33794DH datasheet pdf MC33794DH specifications MC33794DH 120 kHz MC33794DH 7 mA MC33794DH 44-HSOP MC33794DH exposed pad MC33794DH application circuit MC33794DH noncontact sensing MC33794DH equivalent MC33794DH replacement MC33794DH price MC33794DH stock NXP MC33794DH

関連部品&用語

NXP Semiconductors MC33794DH MC33794 electric field imaging device sensor interface IC noncontact sensing interface IC semiconductor electric field sine-wave excitation 120 kHz 7 mA supply current ISO9141 logic input logic output external resistor 44-HSOP 44-BSSOP exposed pad surface mount tube packaging touch control occupancy detection dielectric object detection
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示