MC56F8365VFGE - 16-bit DSC, 56800E Core, 512KB Flash, 60MHz | NXP
部品番号: MC56F8365VFGE ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $71.63 | $71.63 |
| 10 | $64.47 | $644.70 |
| 100 | $53.72 | $5,372.00 |
| 500 | $46.56 | $23,280.00 |
| 1,000 | $42.97 | $42,970.00 |
MC56F8365VFGE 概要
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic real-time control capability of a microcontroller with the computational throughput of a digital signal processor (DSP). Within the broader taxonomy, a DSC sits between microcontroller (MCU) and digital signal processor (DSP), belonging to the embedded processor family of semiconductors. The 56800E core used in the MC56F8365VFGE is Harvard-architecture, supports single-cycle MAC operations, and includes a barrel shifter and DO-loop hardware, making it suitable for sensorless motor control, power conversion, and real-time signal conditioning tasks.
Key features of the MC56F8365VFGE include 512KB of Flash memory organized as 256K x 16, 60 MHz maximum CPU clock frequency, dual 12-bit ADCs with up to 8 channels each, and an on-chip temperature sensor. The device also offers up to 12 PWM outputs with programmable dead-time insertion, two SCI (UART) modules, one SPI module, one I2C module, and a CAN 2.0 A/B controller. The 128-LQFP package exposes extensive GPIO and dedicated peripheral pins for multi-phase inverter drive, encoder feedback, and fault input handling.
The 56800E core uses a modified Harvard architecture with separate program and data buses plus a dedicated peripheral bus. This enables deterministic interrupt response and parallel peripheral operation, both critical for closed-loop motor control. The JTAG/Enhanced OnCE debug port supports real-time trace and hardware breakpoints, simplifying firmware development for safety-critical and energy-in-motion control applications.
Typical applications include three-phase AC induction and PMSM motor drives, digital switch-mode power supplies, uninterruptible power systems, photovoltaic inverters, industrial servo controllers, and automotive body electronics. The 60 MHz performance and integrated analog peripherals make it well-suited for sensorless vector control (FOC) of brushless DC motors where deterministic loop timing is essential.
When designing with this device, allocate sufficient decoupling (100 nF + 10 uF per VDD/VSS pair) and follow NXP's PCB layout recommendations in the 56F8365 datasheet to minimize ADC noise. Verify that your application fits within the 512KB Flash / 32KB RAM budget and that the 128-LQFP footprint matches available assembly tooling. This page synthesizes lifecycle alerts, package information, and design considerations not consolidated in the manufacturer datasheet.
ドロップイン代替品: MC56F8365VFGE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC56F8365VFGE （同一形状・フットプリント） — 相違点: Core Architecture, Communication Interfaces, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
MC56F8335VFGE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC56F8355MFGE
✅ ドロップイン✓ 在庫あり
$15.7 / 個
データシートを見る →MC56F8357VFGE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC56F8365VFGE 最大定格＆電気的特性
| Core Architecture | 56800E (Harvard, 16-bit DSC) |
| データバス幅 | 16 bit |
| Program Memory (Flash) | 512 KB (256K x 16) |
| RAM | 32 KB |
| Maximum CPU Clock | 60 MHz |
| CAN | 1 x CAN 2.0 A/B |
| SCI (UART) | 2 x SCI |
| SPI | 1 x SPI |
| I2C | 1 x I2C |
| パッケージ | 128-LQFP (14x20 mm) |
| 実装タイプ | Surface Mount |
| 電源電圧 | 3.3 V |
MC56F8365VFGE 128-lqfp (14x20 mm) ピン配置ガイド
MC56F8365VFGE (128-lqfp (14x20 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC56F8365VFGE.
詳細は データシート をご参照ください。
主な用途
MC56F8365VFGE の用途: 6 件s: Three-Phase PMSM Motor Control, AC Induction Motor VFD, Digital Switch-Mode Power Supply, Uninterruptible Power System (UPS), Solar Photovoltaic Inverter, Industrial Servo Controller.
Three-Phase PMSM Motor Control
The MC56F8365VFGE drives permanent magnet synchronous motors (PMSM) and brushless DC motors using field-oriented control (FOC). Its 60 MIPS 56800E core executes the Park/Clarke transforms and PI current loops within a sub-20 us control period. Dual 12-bit ADCs sample phase currents simultaneously, and the 12 PWM outputs with programmable dead-time generate the inverter gate signals directly. This eliminates an external gate driver FPGA in sub-2 kW drives.
おすすめ
AC Induction Motor VFD
For variable-frequency drives (VFD) controlling AC induction motors, the MC56F8365VFGE handles scalar V/Hz and indirect FOC algorithms. The 60 MHz CPU sustains V/Hz profiles plus slip compensation while leaving margin for keypad/HMI processing. CAN 2.0 A/B enables Modbus/CANopen integration into industrial PLC networks. The 128-LQFP provides ample GPIO for opto-isolated fault inputs and relay outputs.
おすすめ
Digital Switch-Mode Power Supply
In digital SMPS designs, the MC56F8365VFGE implements voltage-mode and peak-current-mode control loops. The high-resolution PWM outputs deliver duty cycle updates every 100 ns, supporting switching frequencies up to 500 kHz. Dual ADCs sense output voltage and primary-side current simultaneously, while the 512KB Flash stores compensation coefficients and fault logging for the entire product lifecycle. This DSC approach replaces analog UC3842-style controllers with a tunable firmware solution.
おすすめ
Uninterruptible Power System (UPS)
UPS topologies invert for double-conversion designs, where the MC56F8365VFGE runs the inverter control loop, battery charger state machine, and AC-line synchronization. Its hardware DO-loop and barrel shifter accelerate RMS calculations, while CAN/SCIs stream telemetry to the system supervisor. The 128-LQFP exposes dedicated pins for grid-sync zero-crossing detection and battery-management I/O, reducing external glue logic.
おすすめ
Solar Photovoltaic Inverter
Photovoltaic string inverters benefit from the MC56F8365VFGE's MPPT algorithm execution at 60 MIPS, dual ADCs for panel voltage and grid current sensing, and CAN for grid-tie communication. The integrated peripherals generate grid-synchronized 50/60 Hz PWM waveforms, while 512KB Flash stores MPPT lookup tables and grid-code country profiles. Real-time trace via JTAG simplifies field commissioning and post-fault diagnostics.
おすすめ
Industrial Servo Controller
Closed-loop servo controllers rely on the MC56F8365VFGE for position-loop closure via encoder feedback, current-loop via dual ADCs, and velocity profile generation. The 56800E DO-loop and barrel shifter compute sine/cosine trajectories in real time. CANopen slave protocol support through the on-chip CAN module enables integration into multi-axis CNC and robotic systems with cycle times under 1 ms.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC56F8365VFGE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC56F8335VFGE | MC56F8355MFGE | MC56F8357VFGE |
|---|---|---|---|---|
| Package | 128-LQFP (14x20 mm) | 128-LQFP (14x20 mm) - same | 128-LQFP - same | 128-LQFP (14x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | 56800E 16-bit | 56800E 16-bit - same | 56800E 16-bit - same | 56800E 16-bit - same |
| Maximum Clock | 60 MHz | 60 MHz - same | 60 MHz - same | 60 MHz - same |
| Lifecycle Status | EOL | EOL (same family) | EOL (same family) | EOL (same family) |
| Pin-Compatible Drop-In | Reference part | Yes (with reduced Flash) | Yes (verify peripherals) | Yes (verify peripherals) |
主な差別化要因
- Highest Flash density in the 56F836x 128-LQFP family （vs MC56F8335VFGE)
- Highest peripheral integration in 56F836x family （vs MC56F8355MFGE)
- 128-LQFP 14x20 mm footprint vs 64-LQFP on 56F8257 （vs MC56F8257VLH)
設計ノート
Estimated: At 60 MHz CPU clock and typical 56800E core current of approximately 70 mA, plus 30 mA for ADC/PWM activity at 3.3 V VDD, the device draws roughly 100 mA. Place one 100 nF + one 10 uF ceramic decoupling pair adjacent to each of the four VDD/VSS pin groups (AVDD, DVDD, PLLVDD, IOVDD). A single bulk 47 uF tantalum or low-ESR ceramic near the regulator output suppresses transient droops during PWM switching edges. Estimated based on typical 56800E-family power budgets - verify against the original 56800E datasheet before committing.
The 128-LQFP has a typical theta_JA of approximately 35-45 C/W (estimated from package family). With 100 mA at 3.3 V drawing 0.33 W, junction temperature rise above ambient is roughly 12-15 C, well inside the -40C to +85C operating range. Still avoid placing the device directly above heat-dissipating power components to keep airflow unobstructed.
Keep ADC analog inputs (ANA0-ANA7, ANB0-ANB7) traces short and isolated from PWM switching traces to avoid digital noise coupling into current-sense measurements. Use a separate analog ground island tied to the main GND at one point near the device AGND pin. Place the JTAG connector within 50 mm of tracer return traces to ensure reliable debugger handshakes and full-speed operation. Decoupling capacitors must be placed within 5 mm of the package pin per the manufacturer datasheet layout guidelines.
Do not assume software/firmware from one 56800E DSC will run unmodified on another even within the same family - interrupt vector tables, peripheral memory maps, and register layouts differ between 56F83xxx variants. The MC56F8365 EOL status means new firmware updates and errata from NXP have ceased - engineering teams should freeze the BSP at the Last Time Buy date to avoid surprises. Always order a 5-10% safety stock above BOM for the multi-year support horizon of deployed equipment.
コンプライアンス情報
RoHS, REACH, lead-free, halogen-free, and conflict-mineral compliance data were not present in the verified web data excerpts. The 128-LQFP package is historically a lead-free surface-mount package, but a confirmed compliance statement should be requested from NXP directly via the product page before using the part in regulated markets.