MC56F8365VFGE - 16-bit DSC, 56800E Core, 512KB Flash, 60MHz | NXP
Артикул: MC56F8365VFGE ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $71.63 | $71,63 |
| 10 | $64.47 | $644,70 |
| 100 | $53.72 | $5.372,00 |
| 500 | $46.56 | $23.280,00 |
| 1.000 | $42.97 | $42.970,00 |
MC56F8365VFGE Обзор
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic real-time control capability of a microcontroller with the computational throughput of a digital signal processor (DSP). Within the broader taxonomy, a DSC sits between microcontroller (MCU) and digital signal processor (DSP), belonging to the embedded processor family of semiconductors. The 56800E core used in the MC56F8365VFGE is Harvard-architecture, supports single-cycle MAC operations, and includes a barrel shifter and DO-loop hardware, making it suitable for sensorless motor control, power conversion, and real-time signal conditioning tasks.
Key features of the MC56F8365VFGE include 512KB of Flash memory organized as 256K x 16, 60 MHz maximum CPU clock frequency, dual 12-bit ADCs with up to 8 channels each, and an on-chip temperature sensor. The device also offers up to 12 PWM outputs with programmable dead-time insertion, two SCI (UART) modules, one SPI module, one I2C module, and a CAN 2.0 A/B controller. The 128-LQFP package exposes extensive GPIO and dedicated peripheral pins for multi-phase inverter drive, encoder feedback, and fault input handling.
The 56800E core uses a modified Harvard architecture with separate program and data buses plus a dedicated peripheral bus. This enables deterministic interrupt response and parallel peripheral operation, both critical for closed-loop motor control. The JTAG/Enhanced OnCE debug port supports real-time trace and hardware breakpoints, simplifying firmware development for safety-critical and energy-in-motion control applications.
Typical applications include three-phase AC induction and PMSM motor drives, digital switch-mode power supplies, uninterruptible power systems, photovoltaic inverters, industrial servo controllers, and automotive body electronics. The 60 MHz performance and integrated analog peripherals make it well-suited for sensorless vector control (FOC) of brushless DC motors where deterministic loop timing is essential.
When designing with this device, allocate sufficient decoupling (100 nF + 10 uF per VDD/VSS pair) and follow NXP's PCB layout recommendations in the 56F8365 datasheet to minimize ADC noise. Verify that your application fits within the 512KB Flash / 32KB RAM budget and that the 128-LQFP footprint matches available assembly tooling. This page synthesizes lifecycle alerts, package information, and design considerations not consolidated in the manufacturer datasheet.
Аналоги без доработки для MC56F8365VFGE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC56F8365VFGE (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Communication Interfaces, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC56F8335VFGE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC56F8355MFGE
✅ Прямая замена✓ В наличии
$15.7 / шт.
Открыть даташит →MC56F8357VFGE
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC56F8365VFGE Максимальные параметры и электрические характеристики
| Core Architecture | 56800E (Harvard, 16-bit DSC) |
| Разрядность шины данных | 16 bit |
| Program Memory (Flash) | 512 KB (256K x 16) |
| RAM | 32 KB |
| Maximum CPU Clock | 60 MHz |
| CAN | 1 x CAN 2.0 A/B |
| SCI (UART) | 2 x SCI |
| SPI | 1 x SPI |
| I2C | 1 x I2C |
| Корпус | 128-LQFP (14x20 mm) |
| Тип монтажа | Surface Mount |
| Напряжение питания | 3.3 V |
Руководство по цоколевке MC56F8365VFGE в корпусе 128-lqfp (14x20 mm)
Цоколевка для MC56F8365VFGE (корпус 128-lqfp (14x20 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC56F8365VFGE.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC56F8365VFGE подходит для 6 применениеs: Three-Phase PMSM Motor Control, AC Induction Motor VFD, Digital Switch-Mode Power Supply, Uninterruptible Power System (UPS), Solar Photovoltaic Inverter, Industrial Servo Controller.
Three-Phase PMSM Motor Control
The MC56F8365VFGE drives permanent magnet synchronous motors (PMSM) and brushless DC motors using field-oriented control (FOC). Its 60 MIPS 56800E core executes the Park/Clarke transforms and PI current loops within a sub-20 us control period. Dual 12-bit ADCs sample phase currents simultaneously, and the 12 PWM outputs with programmable dead-time generate the inverter gate signals directly. This eliminates an external gate driver FPGA in sub-2 kW drives.
Рекомендуется
AC Induction Motor VFD
For variable-frequency drives (VFD) controlling AC induction motors, the MC56F8365VFGE handles scalar V/Hz and indirect FOC algorithms. The 60 MHz CPU sustains V/Hz profiles plus slip compensation while leaving margin for keypad/HMI processing. CAN 2.0 A/B enables Modbus/CANopen integration into industrial PLC networks. The 128-LQFP provides ample GPIO for opto-isolated fault inputs and relay outputs.
Рекомендуется
Digital Switch-Mode Power Supply
In digital SMPS designs, the MC56F8365VFGE implements voltage-mode and peak-current-mode control loops. The high-resolution PWM outputs deliver duty cycle updates every 100 ns, supporting switching frequencies up to 500 kHz. Dual ADCs sense output voltage and primary-side current simultaneously, while the 512KB Flash stores compensation coefficients and fault logging for the entire product lifecycle. This DSC approach replaces analog UC3842-style controllers with a tunable firmware solution.
Рекомендуется
Uninterruptible Power System (UPS)
UPS topologies invert for double-conversion designs, where the MC56F8365VFGE runs the inverter control loop, battery charger state machine, and AC-line synchronization. Its hardware DO-loop and barrel shifter accelerate RMS calculations, while CAN/SCIs stream telemetry to the system supervisor. The 128-LQFP exposes dedicated pins for grid-sync zero-crossing detection and battery-management I/O, reducing external glue logic.
Рекомендуется
Solar Photovoltaic Inverter
Photovoltaic string inverters benefit from the MC56F8365VFGE's MPPT algorithm execution at 60 MIPS, dual ADCs for panel voltage and grid current sensing, and CAN for grid-tie communication. The integrated peripherals generate grid-synchronized 50/60 Hz PWM waveforms, while 512KB Flash stores MPPT lookup tables and grid-code country profiles. Real-time trace via JTAG simplifies field commissioning and post-fault diagnostics.
Рекомендуется
Industrial Servo Controller
Closed-loop servo controllers rely on the MC56F8365VFGE for position-loop closure via encoder feedback, current-loop via dual ADCs, and velocity profile generation. The 56800E DO-loop and barrel shifter compute sine/cosine trajectories in real time. CANopen slave protocol support through the on-chip CAN module enables integration into multi-axis CNC and robotic systems with cycle times under 1 ms.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC56F8365VFGE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC56F8335VFGE | MC56F8355MFGE | MC56F8357VFGE |
|---|---|---|---|---|
| Package | 128-LQFP (14x20 mm) | 128-LQFP (14x20 mm) - same | 128-LQFP - same | 128-LQFP (14x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | 56800E 16-bit | 56800E 16-bit - same | 56800E 16-bit - same | 56800E 16-bit - same |
| Maximum Clock | 60 MHz | 60 MHz - same | 60 MHz - same | 60 MHz - same |
| Lifecycle Status | EOL | EOL (same family) | EOL (same family) | EOL (same family) |
| Pin-Compatible Drop-In | Reference part | Yes (with reduced Flash) | Yes (verify peripherals) | Yes (verify peripherals) |
Ключевые отличия
- Highest Flash density in the 56F836x 128-LQFP family (против MC56F8335VFGE)
- Highest peripheral integration in 56F836x family (против MC56F8355MFGE)
- 128-LQFP 14x20 mm footprint vs 64-LQFP on 56F8257 (против MC56F8257VLH)
Заметки по проектированию
Estimated: At 60 MHz CPU clock and typical 56800E core current of approximately 70 mA, plus 30 mA for ADC/PWM activity at 3.3 V VDD, the device draws roughly 100 mA. Place one 100 nF + one 10 uF ceramic decoupling pair adjacent to each of the four VDD/VSS pin groups (AVDD, DVDD, PLLVDD, IOVDD). A single bulk 47 uF tantalum or low-ESR ceramic near the regulator output suppresses transient droops during PWM switching edges. Estimated based on typical 56800E-family power budgets - verify against the original 56800E datasheet before committing.
The 128-LQFP has a typical theta_JA of approximately 35-45 C/W (estimated from package family). With 100 mA at 3.3 V drawing 0.33 W, junction temperature rise above ambient is roughly 12-15 C, well inside the -40C to +85C operating range. Still avoid placing the device directly above heat-dissipating power components to keep airflow unobstructed.
Keep ADC analog inputs (ANA0-ANA7, ANB0-ANB7) traces short and isolated from PWM switching traces to avoid digital noise coupling into current-sense measurements. Use a separate analog ground island tied to the main GND at one point near the device AGND pin. Place the JTAG connector within 50 mm of tracer return traces to ensure reliable debugger handshakes and full-speed operation. Decoupling capacitors must be placed within 5 mm of the package pin per the manufacturer datasheet layout guidelines.
Do not assume software/firmware from one 56800E DSC will run unmodified on another even within the same family - interrupt vector tables, peripheral memory maps, and register layouts differ between 56F83xxx variants. The MC56F8365 EOL status means new firmware updates and errata from NXP have ceased - engineering teams should freeze the BSP at the Last Time Buy date to avoid surprises. Always order a 5-10% safety stock above BOM for the multi-year support horizon of deployed equipment.
Информация о соответствии
RoHS, REACH, lead-free, halogen-free, and conflict-mineral compliance data were not present in the verified web data excerpts. The 128-LQFP package is historically a lead-free surface-mount package, but a confirmed compliance statement should be requested from NXP directly via the product page before using the part in regulated markets.