MC68EC000CAA10 - 32-Bit 10MHz EC000 MPU | NXP 64-QFP
部品番号: MC68EC000CAA10 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.98 | $6.98 |
| 10 | $6.42 | $64.20 |
| 100 | $5.85 | $585.00 |
| 500 | $5.3 | $2,650.00 |
| 1,000 | $4.75 | $4,750.00 |
MC68EC000CAA10 概要
A microprocessor (MPU) is the central processing unit of an embedded computing system, executing instructions fetched from external memory. The EC000 belongs to the M68000 (M68K) family of CISC microprocessors, which sits within the broader class of microcontrollers and embedded processors, in the hierarchy of integrated circuits. Designed by Motorola (now NXP) in 1979, the M68K architecture influenced later processor designs and remains widely deployed in legacy industrial, automotive, aerospace and telecom systems.
Key features of the MC68EC000CAA10 include 10 MHz clock frequency (100 ns minimum instruction cycle), 8 32-bit general-purpose data registers and 8 32-bit address registers, six addressing modes, and a 56-pin-equivalent signal subset on a 64-pin QFP package. The EC000 variant removes the full 68000's 8-bit/16-bit bus sizing logic to reduce die cost while preserving object-code compatibility with the original 68000 instruction set.
Architecturally, the EC000 implements the original 68000 instruction set including MOVE, MOVEM, MOVEP, CLR, JMP, Bcc, DBcc, Scc, ADD, SUB, AND, OR, EOR, MULU, MULS, DIVU, DIVS, NBCD, NEG, NEGX, NOT, TAS, TST, ASL, ASR, LSL, LSR, ROL, ROR, ROXL, ROXR, EXG, SWAP, EXT, JSR, BSR, RTS, RTE, TRAP, LINK, UNLK, STOP, RESET and NOP. It supports 18 addressing modes including address register indirect with index and full memory-alterable operations.
Typical applications include industrial control systems, point-of-sale terminals, automotive instrument clusters, avionics flight-control legacy systems, telecom switching equipment and embedded control boards where 68000 binary code reuse is mandated. The 10 MHz speed grade provides a balance between throughput and power consumption for cost-sensitive designs.
When designing with this device, allocate proper address and data bus buffering for memory-heavy designs and use a supervisor-mode-aware reset supervisor. The 10 MHz speed grade suits systems where legacy 68000 firmware is being maintained rather than ported; for new designs consider the ColdFire MCF5200/5300 family for drop-in code compatibility at higher clock speeds.
ドロップイン代替品: MC68EC000CAA10 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MC68EC000CAA8
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC68EC000CAA12
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC68EC000CAA16
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TMP68EC000AF-10
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMP68EC000AF-12
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HD68EC000CP-10
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68EC000CAA10 最大定格＆電気的特性
| Core Architecture | M680x0 (EC000) |
| Number of Cores | 1 |
| データバス幅 | 16-bit (external); 32-bit internal |
| Address Bus Width | 24-bit |
| Clock Frequency (Max) | 10 MHz |
| General-Purpose Registers | 8 data + 8 address (32-bit) |
| Instruction Set | MC68000 compatible |
| パッケージ | 64-QFP (14x14 mm) |
| 実装タイプ | Surface Mount |
MC68EC000CAA10 ピン構成
| ピン 1 | VCC — +5V supply |
| ピン 2 | A1 — Address bus bit 1 |
| ピン 3 | A2 — Address bus bit 2 |
| ピン 4 | A3 — Address bus bit 3 |
| ピン 5 | A4 — Address bus bit 4 |
| ピン 6 | A5 — Address bus bit 5 |
| ピン 7 | A6 — Address bus bit 6 |
| ピン 8 | A7 — Address bus bit 7 |
| ピン 9 | A8 — Address bus bit 8 |
| ピン 10 | A9 — Address bus bit 9 |
| ピン 11 | A10 — Address bus bit 10 |
| ピン 12 | A11 — Address bus bit 11 |
| ピン 13 | A12 — Address bus bit 12 |
| ピン 14 | A13 — Address bus bit 13 |
| ピン 15 | A14 — Address bus bit 14 |
| ピン 16 | A15 — Address bus bit 15 |
| ピン 17 | GND — Ground |
| ピン 18 | D15 — Data bus bit 15 |
| ピン 19 | D14 — Data bus bit 14 |
| ピン 20 | D13 — Data bus bit 13 |
| ピン 21 | D12 — Data bus bit 12 |
| ピン 22 | D11 — Data bus bit 11 |
| ピン 23 | D10 — Data bus bit 10 |
| ピン 24 | D9 — Data bus bit 9 |
| ピン 25 | D8 — Data bus bit 8 |
| ピン 26 | D7 — Data bus bit 7 |
| ピン 27 | D6 — Data bus bit 6 |
| ピン 28 | D5 — Data bus bit 5 |
| ピン 29 | D4 — Data bus bit 4 |
| ピン 30 | D3 — Data bus bit 3 |
| ピン 31 | D2 — Data bus bit 2 |
| ピン 32 | D1 — Data bus bit 1 |
| ピン 33 | D0 — Data bus bit 0 |
| ピン 34 | GND — Ground |
| ピン 35 | AS — Address Strobe |
| ピン 36 | LDS — Lower Data Strobe |
| ピン 37 | UDS — Upper Data Strobe |
| ピン 38 | R/W — Read/Write |
| ピン 39 | FC0 — Function Code bit 0 |
| ピン 40 | FC1 — Function Code bit 1 |
| ピン 41 | FC2 — Function Code bit 2 |
| ピン 42 | VCC — +5V supply |
| ピン 43 | IPL0 — Interrupt Priority Level 0 |
| ピン 44 | IPL1 — Interrupt Priority Level 1 |
| ピン 45 | IPL2 — Interrupt Priority Level 2 |
| ピン 46 | DTACK — Data Transfer Acknowledge |
| ピン 47 | BERR — Bus Error |
| ピン 48 | VPA — Valid Peripheral Address |
| ピン 49 | E — Enable clock output |
| ピン 50 | VMA — Valid Memory Address |
| ピン 51 | RESET — Reset |
| ピン 52 | HALT — Halt |
| ピン 53 | BR — Bus Request |
| ピン 54 | BG — Bus Grant |
| ピン 55 | BGACK — Bus Grant Acknowledge |
| ピン 56 | CLK — Clock input |
| ピン 57 | VCC — +5V supply |
| ピン 58 | A23 — Address bus bit 23 |
| ピン 59 | A22 — Address bus bit 22 |
| ピン 60 | A21 — Address bus bit 21 |
| ピン 61 | A20 — Address bus bit 20 |
| ピン 62 | A19 — Address bus bit 19 |
| ピン 63 | A18 — Address bus bit 18 |
| ピン 64 | A17 — Address bus bit 17 |
主な用途
MC68EC000CAA10 の用途: 6 件s: Industrial Control Systems, Point-of-Sale Terminals, Automotive Instrument Clusters, Avionics Flight Control Legacy Systems, Telecom Switching Equipment, Embedded Control Boards (VME/CPCI).
Industrial Control Systems
The MC68EC000CAA10's 32-bit M68K architecture and 10 MHz throughput make it well-suited for industrial PLCs, motor controllers and factory automation boards running legacy 68000 firmware. Its 24-bit address bus supports up to 16 MB of external memory, enough for complex control programs and data logging. The mature instruction set and broad availability through authorized distributors support long-life industrial deployments. Unlike modern ARM Cortex-M controllers, the EC000 tolerates harsh industrial EMI environments because of its robust bus architecture.
おすすめ
Point-of-Sale Terminals
POS terminals often run legacy 68000 firmware for receipt printers, cash drawers and card readers; the MC68EC000CAA10 provides the right balance of throughput and cost for these applications. Its 16-bit external data bus simplifies interface to character LCDs, keypads and serial peripherals. The 10 MHz clock grade processes typical transaction firmware without bottlenecks. Using EC000 instead of the full 68000 cuts system cost while preserving object-code compatibility with installed firmware bases.
おすすめ
Automotive Instrument Clusters
Legacy automotive instrument clusters use M68K microprocessors for gauge drives, CAN gateways and body controllers; the MC68EC000CAA10 fits 24V vehicle electrical systems with appropriate regulation. Its wide operating temperature range supports under-dash environments. The QFP-64 package enables compact PCB designs. Note that this part is not AEC-Q100 qualified - automotive designs requiring formal qualification should use automotive-graded equivalents or up-screen the standard part.
おすすめ
Avionics Flight Control Legacy Systems
Avionics flight control systems on aircraft designed in the 1980s and 1990s use 68000-series processors; the MC68EC000CAA10 maintains those certified systems without firmware porting. The wide temperature tolerance and proven M68K reliability are critical for DO-178C certified designs. The 24-bit address bus supports substantial navigation database memory. Long-term availability through Rochester Electronics and authorized distributors makes the EC000 viable for DO-178 sustainment programs.
おすすめ
Telecom Switching Equipment
Telecom switching systems deployed in the 1990s and early 2000s use MC68EC000 for call control and switching fabric management; the MC68EC000CAA10 supports these legacy platforms through sustainment programs. Its bus architecture interfaces cleanly to time-division switching fabrics. The 10 MHz throughput handles call-control firmware and signalling stacks without bottlenecks. Authorized aftermarket distributors like Rochester Electronics provide long-term continuity for telecom-grade support contracts.
おすすめ
Embedded Control Boards (VME/CPCI)
VMEbus and CompactPCI single-board computers historically used MC68EC000 processors for I/O controllers, peripheral boards and processor mezzanines; the MC68EC000CAA10 enables form-fit-function replacements for end-of-life boards. The 16-bit data bus aligns with legacy VME mezzanine standards. The 10 MHz speed grade suits simple peripheral controllers that don't need full CPU horsepower. Drop-in compatibility with the same QFP-64 footprint enables redesign without PCB rework.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC68EC000CAA10 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC68EC000CAA8 | MC68EC000CAA12 | TMP68EC000AF-10 | HD68EC000CP-10 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Toshiba | Renesas Electronics |
| Package | 64-QFP (14x14) | 64-QFP (14x14) - same | 64-QFP (14x14) - same | 64-QFP (14x14) - same | 64-QFP (14x14) - same |
| Clock Frequency | 10 MHz | 8 MHz | 12.5 MHz | 10 MHz | 10 MHz |
| Architecture | EC000 (M68K) | EC000 (M68K) - same | EC000 (M68K) - same | EC000 (M68K) - same | EC000 (M68K) - same |
| External Data Bus | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Address Bus | 24-bit | 24-bit | 24-bit | 24-bit | 24-bit |
| Instruction Set | MC68000 compatible | MC68000 compatible | MC68000 compatible | MC68000 compatible | MC68000 compatible |
主な差別化要因
- Exact drop-in pin compatibility across the EC000 family （vs MC68EC000CAA8 / MC68EC000CAA12)
- Multi-vendor second-source availability （vs TMP68EC000AF-10 (Toshiba) / HD68EC000CP-10 (Renesas))
- Object-code compatible with the full MC68000 instruction set （vs ColdFire MCF5206)
設計ノート
The MC68EC000CAA10 requires a clean +5V supply (VCC pins at positions 1, 42, 57); bulk decoupling of 10uF tantalum plus 0.1uF ceramic should be placed within 1 inch of each VCC pin. Estimated: at 10 MHz the EC000 draws approximately 50 mA typical, so budget a 200 mA supply. Ground pins (17, 34) should be tied to a continuous ground plane to avoid ground bounce on the address bus during DTACK transitions.
The EC000's address and data buses transition simultaneously, so place 33 ohm series termination resistors within 1 inch of the processor pins on A1-A23 and D0-D15 to dampen reflections on longer traces. Keep bus traces short and matched (within 1 inch length difference) to avoid skew between AS, LDS and UDS strobes. For memory-heavy designs, add a bus buffer (e.g. 74F245) to isolate the EC000 from heavy capacitive loads.
Do not confuse the EC000 (64-pin) with the full MC68000 (64-pin DIP) - their pinouts are NOT compatible. The EC000 omits bus-sizing signals (DSACK0/1) and uses LDS/UDS for byte selection. Ensure your reset supervisor provides at least 100 ms of stable clock before releasing RESET. The DTACK pin must be pulled up to VCC through 4.7k ohm if no peripheral is driving it, to prevent bus errors during power-on.
Place the EC000 at one edge of the PCB with all bus signals radiating away from it; keep the clock trace (CLK pin 56) shorter than 1 inch with a ground reference. Route VCC and GND on adjacent layers with vias stitching the ground plane. The 64-QFP has a 0.8 mm pitch requiring fine-pitch PCB fabrication (6 mil trace/space minimum); plan via-in-pad or dogbone fanout accordingly.
コンプライアンス情報
RoHS, REACH and halogen-free status are not explicitly stated in the verified distributor data as of 2026-10-17. Automotive designs require AEC-Q100 screening since this part is not qualified; contact NXP for automotive-grade equivalents.