MC68HCP11E1FU - 8-Bit 3 MHz ROMless MCU | Freescale Semiconductor
部品番号: MC68HCP11E1FU ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $10.1951 | $10.20 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC68HCP11E1FU 概要
A microcontroller is a programmable semiconductor that integrates a CPU, memory interfaces, and peripherals into one embedded-control component. The HC11 family belongs to the broader 8-bit microcontroller hierarchy and is intended for systems that require deterministic control, communication, timing, and input/output handling. Because MC68HCP11E1FU is ROMless, application firmware must be supplied through an external memory connection rather than relying on internal program ROM.
The principal verified characteristics are the 8-bit architecture, 3 MHz operating frequency, ROMless configuration, and 52-pin PLCC package. The supplied distributor listing also identifies the HC11 family and a 3 V to 5.5 V operating range. Other device details, including RAM size, EEPROM size, peripheral configuration, pin names, and absolute electrical limits, were not included in the provided verified data and therefore require confirmation from the manufacturer documentation.
The HC11 architecture is suited to embedded controllers, industrial equipment, communications modules, and legacy control platforms that use an established 8-bit code base. Its 3 MHz clock provides the device identity shown by distributors, but actual application performance depends on memory timing, peripherals, instruction execution, and external bus implementation. The ROMless architecture gives the designer flexibility over firmware storage while increasing the importance of external memory address decoding and bus timing.
Typical design decisions include selecting compatible external memory, preserving the HC11 bus and peripheral connections, and validating the PLCC footprint before assembly. Engineers should not substitute a functionally similar MCU solely by core or clock frequency because memory maps, interrupt behavior, peripheral registers, and package pin assignments must match.
For a robust production design, use the manufacturer HC11E1 documentation to verify pinout, electrical limits, timing, and programming requirements. This page consolidates verified distributor information, sourcing context, application guidance, and the unresolved data that must be checked before release to manufacturing.
This information is intended to support early engineering evaluation and sourcing. Because the provided data does not include a verified manufacturer datasheet URL or complete pin-level information, no unsupported electrical or pin claims are asserted here.
ドロップイン代替品: MC68HCP11E1FU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC68HCP11E1FU （同一形状・フットプリント） — 相違点: Program Memory, ADC, Architecture, Core, Device Type.
クイック比較ツール — 並列比較する代替部品を選択:
MC68HCP11E1CFU3
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC68HC11E0CFNE3
✅ ドロップイン✓ 在庫あり
$9.95 / 個
データシートを見る →MC68HC11E1FN
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68HC711MA8FU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$11.6 / 個
データシートを見る →MC68HC16Z1MAG16
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC68HCP11E1FU 最大定格＆電気的特性
| Product Type | 8-bit ROMless microcontroller |
| CPU Family | HC11 |
| Operating Frequency | 3 MHz |
| Program Memory Configuration | ROMless |
| Operating Voltage Range | 3 V to 5.5 V |
| Package Type | 52-pin PLCC |
| Package Dimensions | 19.13 mm x 19.13 mm |
| 実装タイプ | Surface mount |
| Device Classification | Embedded microcontroller |
| Architecture | 8-bit |
| Manufacturer | Freescale Semiconductor |
MC68HCP11E1FU 19.13 mm x 19.13 mm ピン配置ガイド
MC68HCP11E1FU (19.13 mm x 19.13 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC68HCP11E1FU.
詳細は データシート をご参照ください。
主な用途
MC68HCP11E1FU の用途: 6 件s: Legacy HC11 Industrial Controller, External-Memory Embedded System, Communications Interface Controller, Data Acquisition and Monitoring Unit, Motor and Equipment Control, Programmable Logic Controller.
Legacy HC11 Industrial Controller
MC68HCP11E1FU fits an established HC11 control platform that uses an 8-bit CPU, 3 MHz operating rate, and external program memory. It can be used where the original firmware and bus architecture are already qualified, allowing the controller design to retain proven application logic while using a ROMless MCU with external memory. The 52-pin PLCC package requires a footprint and pinout check before layout release. Because the supplied data does not confirm industrial temperature grade, EMC performance, or complete peripheral details, qualification must use the manufacturer HC11E1 documentation.
おすすめ
External-Memory Embedded System
The ROMless configuration of MC68HCP11E1FU makes it appropriate for an embedded system that separates application firmware from the MCU. External memory can be selected to match the required firmware capacity and bus timing, while the MCU handles the HC11 control function. The 3 MHz device identity and 3 V to 5.5 V operating range provide the initial platform constraints, but address decoding, memory timing, reset behavior, and bus contention must be verified from the manufacturer documentation before schematic release.
おすすめ
Communications Interface Controller
MC68HCP11E1FU can serve as the control element in a legacy communications peripheral or protocol controller when its HC11 peripherals, interrupt handling, and external bus support match the system. The 8-bit architecture and 3 MHz clock are suitable for coordinating protocol state machines and I/O activity, but the available evidence does not identify UART, SPI, CAN, or other communication peripherals. Confirm the exact pinout and peripheral registers before selecting this MCU for a new communications design.
おすすめ
Data Acquisition and Monitoring Unit
A monitoring or data-acquisition product can use MC68HCP11E1FU when the existing HC11 firmware performs sensor sampling, control sequencing, and external data handling. The ROMless architecture permits firmware capacity to scale with the external memory design, and the 3 MHz operating point supports many traditional embedded-control tasks. However, analog front-end accuracy, sensor timing, watchdog behavior, and I/O capacity are not specified in the provided data, so those requirements must be checked against the complete datasheet and reference design.
おすすめ
Motor and Equipment Control
MC68HCP11E1FU may be evaluated for legacy motor or equipment-control functions where an established HC11 software base already controls relays, actuators, or sequencing logic. Its 8-bit CPU and 3 MHz identity are appropriate for deterministic supervisory control, but motor-drive timing, I/O levels, isolation, and protection requirements are outside the verified data. A new motor-control product should not rely on this MCU without reviewing absolute maximum ratings, peripheral availability, thermal limits, and application-specific safety requirements.
おすすめ
Programmable Logic Controller
MC68HCP11E1FU can be considered for a legacy programmable-logic or embedded sequencer that relies on HC11 code and external program storage. The 8-bit architecture is suitable for straightforward control loops and state-machine tasks, while the ROMless configuration allows the firmware organization to follow the original system architecture. The 52-pin PLCC footprint and 3 V to 5.5 V range are verified identity features, but I/O count, timing, watchdog, and electrical drive capability must be confirmed before using it as a new PLC platform.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC68HCP11E1FU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC68HCP11E1CFU3 | MC68HC11E0CFNE3 | MC68HC11E1FN | MC68HC711MA8FU |
|---|---|---|---|---|---|
| Brand | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
主な差別化要因
- ROMless architecture enables application-controlled external firmware storage （vs MC68HC11E0CFNE3)
- Verified 3 MHz operating identity for HC11 firmware timing context （vs MC68HC11E1FN)
- 52-pin PLCC package with 19.13 mm x 19.13 mm dimensions （vs MC68HCP11E1CFU3)
設計ノート
Before committing the PCB, obtain the official HC11E1 family documentation and compare the 52-pin PLCC land pattern, pin numbering, and exposed package details against the verified 19.13 mm by 19.13 mm package statement. Do not rely on package name alone: a PLCC device with the same nominal pin count can still have different pin assignments. Mark all external-memory, clock, reset, and control-signal nets in the schematic and review them against the manufacturer application guidance.
Design the supply rail around the verified 3 V to 5.5 V operating range, but confirm the actual core, I/O, and absolute maximum limits from the manufacturer datasheet. Place the required bypass capacitors close to the MCU power pins using the manufacturer reference layout, and provide clean return paths for the external-memory bus. Estimated: if the system draws a device load of 50 mA at 5 V, the supply power is 0.25 W; this is an illustrative calculation, not a verified MC68HCP11E1FU specification.
Do not substitute a device based only on the HC11 family name, 3 MHz frequency, or PLCC package. A valid replacement must match external-memory organization, address decoding, interrupt vectors, timer behavior, I/O pin functions, electrical levels, and firmware assumptions. The supplied cross-reference results did not establish a fully verified drop-in replacement, so prototype any candidate with bus, memory, reset, and peripheral tests before production use.
コンプライアンス情報
One distributor snippet mentions RoHS compliance, but the supplied verified data does not include a supporting declaration. Compliance fields remain unknown rather than inferred.
