MC705C8ABE - 8-Bit 2.1MHz 8KB OTP MCU | NXP | Embedded
部品番号: MC705C8ABE ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC705C8ABE 概要
What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-control semiconductor that executes instructions on an 8-bit data bus. The MC705C8ABE belongs to the HC05 family and provides the processor core, OTP program storage, RAM, I/O, and timing resources needed for basic control, sensing, and actuator systems. Its 42-pin PDIP package is useful for prototyping, legacy industrial equipment, and through-hole assemblies.
Key features include 8KB of one-time-programmable memory, 304 x 8 RAM, 24 I/O pins, 2.1MHz speed, an internal oscillator, and operation across 3.3V/5V-related supply conditions identified in the verified listings. Because program memory is OTP rather than reprogrammable flash, the firmware image is fixed after programming; this simplifies designs where field updates are not required and increases resistance to accidental firmware changes.
The HC05 architecture uses a compact 8-bit CISC-oriented embedded platform, making it suitable for control loops, digital logic interfaces, simple human-interface functions, and legacy-compatible equipment. The internal oscillator avoids requiring an external clock source for basic operation, while the 24 available I/O pins support external sensors, switches, relays, displays, and communication interfaces when their electrical and timing requirements fit the device.
Typical applications include industrial control panels, appliance controllers, simple instrumentation, motor or relay control, educational embedded systems, and legacy peripheral equipment. The 42-pin PDIP package is easy to inspect and solder by hand, making the device attractive where a small production run or prototype needs through-hole assembly.
For a new design, verify pin multiplexing, maximum port loading, oscillator timing, supply decoupling, OTP programming workflow, and all electrical limits against the manufacturer datasheet. Do not assume that a same-package MCU is interchangeable without checking pin names, reset behavior, peripheral mapping, memory organization, and programming compatibility. The verified data identifies the package as 42-PDIP, but detailed pin-level information is not included in the supplied sources.
ドロップイン代替品: MC705C8ABE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC705C8ABE （同一形状・フットプリント） — 相違点: Program Memory Size, Package, RAM Size, Mounting Type, Manufacturer.
クイック比較ツール — 並列比較する代替部品を選択:
MC705C8ACFNER
✅ ドロップイン✓ 在庫あり
$13.7957 / 個
データシートを見る →MCHSC705C8ACFBE
✅ ドロップイン✓ 在庫あり
$9.85 / 個
データシートを見る →MCHSC705C8ACFNE
✅ ドロップイン✓ 在庫あり
$9.85 / 個
データシートを見る →MCHRC705J1ACDWE
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC68HC705L32FU
✅ ドロップイン✓ 在庫あり
$16.2097 / 個
データシートを見る →MC705C8ABE 最大定格＆電気的特性
| Product Type | 8-bit microcontroller |
| Microcontroller Family | HC05 |
| Architecture | 8-bit CISC |
| Program Memory Size | 8KB (8K x 8) |
| Program Memory Type | OTP |
| RAM Size | 304 x 8 |
| Number of I/O Pins | 24 |
| Operating Speed | 2.1MHz |
| Oscillator Type | Internal |
| 電源電圧 | 3.3V/5V |
| パッケージ | 42-PDIP (0.600 inch, 15.24mm) |
| 実装タイプ | Through-hole |
| Packaging | Tube |
| Core | HC05 |
| Memory Organization | 8K x 8 program memory |
| データバス幅 | 8-bit |
MC705C8ABE 42-pdip (0.600 inch, 15.24mm) ピン配置ガイド
MC705C8ABE (42-pdip (0.600 inch, 15.24mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC705C8ABE.
詳細は データシート をご参照ください。
主な用途
MC705C8ABE の用途: 6 件s: Basic Industrial Control Panel, Appliance and Relay Controller, Legacy Instrumentation Interface, Educational 8-Bit Controller, Simple Motor and Stepper Sequencing, Small Data Logger or Status System.
Basic Industrial Control Panel
The MC705C8ABE fits a basic control-panel controller when the design needs a compact 8-bit CPU, 24 I/O pins, 2.1MHz operation, and through-hole construction. It can read switches and sensors and drive indicator, relay, or alarm logic when those loads remain within the device’s verified electrical limits. Its 8KB OTP program memory is adequate for fixed control code, while 304 x 8 RAM provides working space. Because the supplied data does not include temperature, isolation, EMC, or certification details, industrial deployment should follow the complete manufacturer datasheet and applicable system validation.
おすすめ
Appliance and Relay Controller
The MC705C8ABE is suitable for legacy appliance or relay-control logic where a fixed 8KB OTP image, 24 I/O lines, internal oscillator, and 2.1MHz MCU are sufficient. A microcontroller-based design can consolidate button inputs, timing state machines, solenoid or relay sequencing, and status indication into one controller. The tradeoff is OTP programmability: once the firmware is written, correcting a defect generally requires a new programmed device. Validate coil drive topology, flyback protection, supply transients, and reset behavior in the complete circuit.
おすすめ
Legacy Instrumentation Interface
The MC705C8ABE can support simple instrumentation interfaces when the required functions are digital control, input conditioning, status reporting, and low-speed measurement coordination. Its 24 I/O pins provide a useful resource count for switches, indicators, latches, and interface signals, while the internal oscillator removes the need for a basic external clock source. It is less suitable where high-resolution conversion, high-speed serial communication, or extensive data buffering is required. Those functions are not quantified in the supplied source data and must be checked against the device documentation.
おすすめ
Educational 8-Bit Controller
The HC05 architecture, 2.1MHz operating speed, 8KB OTP program memory, and 42-PDIP package make the MC705C8ABE attractive for educational embedded-control boards and through-hole prototypes. Students can learn port control, interrupts, timers, memory organization, reset behavior, and basic peripheral interfacing without relying on a compact surface-mount footprint. The through-hole package also simplifies visual inspection and hand soldering. Because the MCU uses OTP rather than flash, laboratory workflows should include a controlled programming fixture and a firmware version-identification procedure to prevent accidental permanent programming.
おすすめ
Simple Motor and Stepper Sequencing
The MC705C8ABE may be used for low-complexity motor sequencing when the system requires deterministic step control, limit inputs, and simple status handling rather than a high-performance real-time control loop. The 2.1MHz MCU speed and 24 I/O pins can organize step outputs, home sensors, and fault signals, but actual timing, port drive capability, and peripheral availability are not supplied. Confirm the exact pin multiplexing and electrical limits in the manufacturer datasheet before driving motor drivers or relying on precise step timing.
おすすめ
Small Data Logger or Status System
The MC705C8ABE can serve as a basic fixed-function data logger when the application needs sensor polling, event sequencing, status storage, and low-rate output rather than high-throughput data processing. Its 304 x 8 RAM is available for temporary records and buffers, and the 24 I/O pins can support sensors, mode controls, and indicators. OTP memory makes a stable deployed firmware image appropriate for fixed logging functions. The supplied data does not establish serial-interface timing, storage endurance, or memory-protection features, so those requirements need separate verification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC705C8ABE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC705C8ACFNER | MCHSC705C8ACFBE | MCHSC705C8ACFNE | MCHRC705J1ACDWE | MC68HC705L32FU |
|---|---|---|---|---|---|---|
| Package | 42-PDIP (0.600 inch, 15.24mm) | 42-PDIP according to comparison candidate context; verify official drawing | 42-PDIP according to comparison candidate context; verify official drawing | 42-PDIP according to comparison candidate context; verify official drawing | 42-PDIP according to comparison candidate context; verify official drawing | 42-PDIP according to comparison candidate context; verify official drawing |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
主な差別化要因
- Fixed-function OTP programming memory （vs MC705C8ACFNER)
- HC05 8-bit control platform with 24 I/O pins （vs MCHSC705C8ACFBE)
- Through-hole 42-PDIP implementation （vs MCHSC705C8ACFNE)
- Internal oscillator support （vs MCHRC705J1ACDWE)
設計ノート
Because MC705C8ABE is specified as a 42-PDIP through-hole device, reserve the full 0.600-inch, 15.24mm package footprint and verify pin-1 orientation, drill spacing, and silkscreen clearance against the official mechanical drawing. Do not use a compact SMD MCU footprint as a substitute. If the board will be assembled repeatedly, consider a socket only when temperature, vibration, and maintenance requirements support it.
Design the supply and decoupling around the manufacturer’s verified operating range and pin requirements; the supplied sources identify 3.3V/5V-related operation but do not provide complete absolute maximum or voltage-tolerance ratings. Place the required supply capacitor close to the device power pins, provide a clean return path, and account for startup current and supply transients. Do not infer absolute limits from the listing shorthand.
OTP program memory is the main lifecycle trap for this MCU. Validate the complete firmware image, memory map, interrupt vectors, and programming fixture before programming production parts, because a mistaken OTP write cannot be corrected like flash. Also verify that the alternative part’s programming algorithm and pinout match before using any comparison candidate as a replacement.
Keep oscillator, reset, and sensitive digital inputs away from noisy relay or switching nodes. Use short traces, a stable ground reference, and appropriate input conditioning where external connectors or long wires enter the board. The verified snippets do not specify timing margins, injection limits, or drive strength, so signal-integrity decisions must use the official electrical characteristics rather than generic assumptions.
コンプライアンス情報
The supplied distributor snippets do not provide verified compliance declarations for MC705C8ABE. The Lisleapex result includes a RoHS label in its snippet, but that statement was not treated as authoritative manufacturer documentation. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status from current NXP or authorized distributor documentation.
