MC705C8ACFNER - 8-Bit 2.1MHz MCU, 8KB OTP | NXP
部品番号: MC705C8ACFNER ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $13.7957 | $13.80 |
| 10 | $13.7957 | $137.96 |
| 100 | $13.7957 | $1,379.57 |
| 500 | $13.7957 | $6,897.85 |
| 1,000 | $13.7957 | $13,795.70 |
MC705C8ACFNER 概要
A microcontroller is a compact embedded-computing component that integrates a processor core, program memory, data memory, and peripherals into one package. The HC05 belongs to the 8-bit microcontroller hierarchy, where an integrated CPU executes firmware for control, measurement, communication, and automation tasks. OTP memory is intended for fixed programmed behavior and is not rewritable after programming.
The MC705C8ACFNER's principal verified features are its 8-bit HC05 architecture, 2.1 MHz operating speed, 8 KB OTP memory, 3.3 V or 5 V supply description, and 44-pin PLCC package. The listed 16.59 mm by 16.59 mm body size supports legacy through-hole PCB layouts when the original land pattern and pin function assignment are retained. Surface-mount mounting is reported by one distributor source, while another source lists bulk packaging, so assembly planning should follow the exact manufacturer package drawing and orderable variant.
This part is positioned for cost-sensitive embedded controls requiring a straightforward 8-bit architecture and one-time programmable firmware storage. Its 2.1 MHz clock rating provides a concrete performance reference for control loops, digital I/O sequencing, and compact peripheral integration, although the available verified data does not state RAM capacity, peripheral inventories, ADC resolution, timer counts, or communication blocks.
Typical applications include appliance controllers, simple industrial control modules, instrumentation interfaces, keypad and display control, motor sequencing, and legacy embedded systems. A migration or redesign should not assume compatibility with another MCU family solely because the memory size is similar. Firmware timing, interrupt behavior, port multiplexing, reset circuitry, and electrical limits must be checked against the manufacturer datasheet before substitution.
For PCB integration, verify the 44-pin J-lead PLCC footprint, pin-1 orientation, solder-profile requirements, and available board area. Because OTP devices are programmed only once, firmware validation and production provisioning must occur before the final programming operation. This page combines verified distributor data, package information, practical design guidance, and explicitly identified data gaps for engineering review.
ドロップイン代替品: MC705C8ACFNER — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC705C8ACFNER （同一形状・フットプリント） — 相違点: Mounting Type, Microcontroller Family, Package, Program Memory Size.
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC705C8ACFNER 最大定格＆電気的特性
| Microcontroller Family | HC05 series |
| Processor Architecture | 8-bit HC05 CISC |
| Maximum Clock Speed | 2.1 MHz |
| Program Memory Type | OTP |
| Program Memory Size | 8 KB (8K x 8) |
| Supply Voltage Description | 3.3 V or 5 V |
| Package Type | 44-pin PLCC / 44-LCC (J-Lead) |
| Package Body Size | 16.59 mm x 16.59 mm |
| 動作温度範囲 | -40 °C to +85 °C (TA) |
| 実装タイプ | Surface Mount |
| Manufacturer | NXP Semiconductors |
| Core Processor | HC05 |
| Manufacturer Category | Microcontrollers |
MC705C8ACFNER 16.59 mm x 16.59 mm ピン配置ガイド
MC705C8ACFNER (16.59 mm x 16.59 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC705C8ACFNER.
詳細は データシート をご参照ください。
主な用途
MC705C8ACFNER の用途: 6 件s: Appliance Control, Simple Industrial Control Module, Keypad and Display Interface, Basic Instrumentation Interface, Legacy Equipment Replacement, Motor Sequencing Controller.
Appliance Control
The MC705C8ACFNER fits compact appliance-control logic where an 8-bit processor manages discrete inputs, outputs, timing, and fixed control functions. Its verified 2.1 MHz HC05 core provides a defined execution-rate reference, while 8 KB of OTP memory is appropriate for stable production firmware. The main design constraint is the one-time-programming requirement: validate timing, state-machine logic, and fault handling before programming. The 44-pin PLCC package may also require careful inspection of an existing through-hole footprint and its assembly process.
おすすめ
Simple Industrial Control Module
The MC705C8ACFNER can serve as the control core for a small automation module when the required functions are limited and the product is programmed once during manufacturing. The verified -40 °C to +85 °C ambient range provides a documented temperature envelope, but industrial qualification is not established by the supplied data. Designers should verify I/O thresholds, reset behavior, watchdog requirements, isolation, and EMC performance. The 44-pin PLCC footprint also makes it suitable mainly for boards designed around the same package and assembly constraints.
おすすめ
Keypad and Display Interface
The MC705C8ACFNER is appropriate for a compact keypad, display, or menu-control subsystem when firmware must combine input scanning with fixed output sequencing. The 8-bit architecture and 2.1 MHz operating speed are useful for straightforward digital state machines, but the verified material does not specify LCD drivers, serial interfaces, GPIO count, or RAM. Those missing details must be checked before claiming direct interface compatibility. OTP storage favors fixed production behavior, while the PLCC package requires a matching mechanical footprint.
おすすめ
Basic Instrumentation Interface
The MC705C8ACFNER can support basic instrumentation front ends that require digital control, status handling, and fixed acquisition sequencing. Its 2.1 MHz core is a useful starting point for low-bandwidth control logic, but the verified sources do not confirm ADC resolution, sensor interfaces, calibration storage, or communication peripherals. Those features must be established from the manufacturer datasheet and firmware requirements. The OTP format is useful for production-stable control code, although field updates would require a different device strategy.
おすすめ
Legacy Equipment Replacement
The MC705C8ACFNER is relevant to maintenance and continuation of legacy equipment where the original PCB uses a 44-pin PLCC footprint and the original firmware behavior is known. Its 8 KB OTP memory can preserve a stable control image, but OTP programming limits revision flexibility. Before installing the part, compare pin functions, supply rails, clock circuitry, port loads, and timing with the installed device. A package match alone is insufficient to establish a safe drop-in replacement.
おすすめ
Motor Sequencing Controller
The MC705C8ACFNER can implement a small motor-sequencing controller when the design uses discrete outputs, simple interlocks, and fixed timing. The 8-bit core and 2.1 MHz clock are sufficient as a documented starting point for state-machine control, but motor-drive protection, current sensing, isolation, and timing tolerances are not specified in the verified results. Use external driver circuitry as required and validate worst-case startup, stall, and fault behavior. The PLCC package must match the mechanical and soldering requirements of the target assembly.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC705C8ACFNER — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
主な差別化要因
- Legacy HC05 control architecture in a 44-pin PLCC package （vs MC68HC705L32FU)
- OTP-based production configuration （vs MC9S08QG4CDNER)
- Defined 2.1 MHz operating point （vs MC908AP32CFAER)
設計ノート
Treat the 44-pin PLCC footprint as a mechanical and electrical commitment. Before layout, obtain the exact manufacturer land-pattern drawing and verify pin-1 orientation, J-lead geometry, pad dimensions, and solder-process requirements. The verified distributor data identifies a 44-pin PLCC/LCC package and a 16.59 mm x 16.59 mm body, but those summary values alone are not sufficient to generate a production footprint.
Do not substitute an MCU solely by matching the 8-bit core and 8 KB memory size. Firmware compatibility depends on the pinout, memory map, reset behavior, clock configuration, timer resources, interrupt vector table, peripheral registers, and electrical timing. Validate the original schematic and manufacturer datasheet before treating any candidate as a replacement.
Confirm the exact supply and I/O voltage limits from the manufacturer datasheet. The verified results describe the device as 3.3 V or 5 V, but they do not provide separate core, I/O, reset, and absolute-maximum limits. Include appropriate decoupling, validate power-up and reset behavior in the final circuit, and avoid assuming that the package operating-temperature report establishes industrial or automotive compliance.
OTP program memory cannot be erased and rewritten during normal production. Maintain a controlled programming process, version the firmware externally, test identical devices before the final program operation, and provide a recovery plan for incorrect images. This is especially important when the MCU controls safety interlocks, motor sequencing, or equipment that cannot tolerate a failed update.
コンプライアンス情報
The verified search results identify NXP Semiconductors as the manufacturer but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed from the current manufacturer product documentation.
