MC908JL16CSPE - 8-bit HC08 MCU, 16KB Flash, 32-SDIP | NXP
部品番号: MC908JL16CSPE ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.95 | $9.95 |
| 10 | $9.1 | $91.00 |
| 100 | $8.2 | $820.00 |
| 500 | $7.45 | $3,725.00 |
| 1,000 | $6.95 | $6,950.00 |
MC908JL16CSPE 概要
What is an 8-bit microcontroller? An 8-bit microcontroller unit (MCU) is a small self-contained computer-on-a-chip that combines an 8-bit CPU, program memory (ROM/Flash), data memory (RAM), and peripheral interfaces (timers, ADC, I/O, communication ports) on a single die. In the broader hierarchy, this places the MC908JL16CSPE as: microcontroller -> 8-bit MCU -> M68HC08 family -> Freescale/NXP low-cost Flash MCU class -> embedded controller. 8-bit MCUs remain dominant in cost-sensitive and timing-deterministic applications such as motor control, white goods, and sensor interfacing.
Key features of the MC908JL16CSPE include 16KB of in-application re-programmable Flash with security features, an internal oscillator that eliminates the need for an external crystal in many designs, low-power stop and wait modes for battery-friendly operation, a fully static CMOS design, and an enhanced serial communications interface (SCI) plus a serial peripheral interface (SPI). The device is fully upward object-code compatible with the M6805, M146805, and M68HC05 families.
The HC08 CPU uses a 16-bit stack pointer and a 16-bit index register (H:X) to provide fast context switching and C-friendly addressing. The integrated 12-channel 8-bit ADC has a conversion time under 17 µs and is suitable for monitoring sensors such as thermistors, potentiometers, and battery voltage. Two 16-bit timer modules each support input capture, output compare, and PWM generation up to 8-bit resolution, making the MCU suitable for simple closed-loop control loops.
Typical applications include appliance control boards (washing machines, microwave ovens, HVAC control panels), battery chargers, remote controls, industrial sensor interfaces, low-end motor drives, and educational/evaluation boards. Designers choose the JL16 for its combination of Flash re-programmability (simplifying firmware revisions), small package, and low unit cost in production volumes of 10K and above.
When designing with the MC908JL16CSPE, ensure that the reset pin is properly decoupled with a 1 µF capacitor and that the IRQ pin is either pulled high or driven by the system controller. The internal oscillator accuracy is sufficient for asynchronous serial communications up to 9600 baud but is not suitable for CAN, USB, or higher-speed UART links without external oscillator options.
This page synthesizes distributor pricing, drop-in 32-SDIP compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: MC908JL16CSPE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MC68HC908JL16CPE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68HC908JK8CPE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68HC908JK1CPE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68HC908GP32CPE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC68HC08JK1CP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC908JL16CSPE 最大定格＆電気的特性
| Core | M68HC08 (HC08) |
| データバス幅 | 8 bit |
| Maximum Internal Bus Frequency | 8 MHz |
| Program Memory Size | 16 KB (16K x 8) Flash |
| RAM Size | 512 B (512 x 8) |
| Number of I/O Pins | 26 |
| ADC | 12-channel, 8-bit |
| Timers | 2 x 16-bit (TIM1, TIM2) |
| Communication Interfaces | SCI (UART), SPI |
| Oscillator Type | Internal |
| 電源電圧 | 2.7 V to 5.5 V |
| 動作温度 | -40 C to +85 C (industrial) |
| パッケージ | 32-SDIP (0.400 inch, 10.16 mm) |
| 実装タイプ | Through-Hole |
| Packaging | Tube |
| Object-Code Compatibility | M6805, M146805, M68HC05 Families |
| Low-Power Modes | Stop and Wait |
MC908JL16CSPE ピン構成
| ピン 1 | IRQ — External interrupt request (active low) |
| ピン 2 | RST — Reset input (active low) |
| ピン 3 | PTA0 — Port A bit 0 / TCLK |
| ピン 4 | PTA1 — Port A bit 1 / ECHO |
| ピン 5 | PTA2 — Port A bit 2 |
| ピン 6 | PTA3 — Port A bit 3 |
| ピン 7 | VDD — Power supply (2.7 V to 5.5 V) |
| ピン 8 | VSS — Ground |
| ピン 9 | PTA4 — Port A bit 4 / TCLK2 |
| ピン 10 | PTA5 — Port A bit 5 |
| ピン 11 | PTA6 — Port A bit 6 |
| ピン 12 | PTA7 — Port A bit 7 |
| ピン 13 | PTB0 — Port B bit 0 / ADC0 |
| ピン 14 | PTB1 — Port B bit 1 / ADC1 |
| ピン 15 | PTB2 — Port B bit 2 / ADC2 |
| ピン 16 | PTB3 — Port B bit 3 / ADC3 |
| ピン 17 | PTB4 — Port B bit 4 / ADC4 |
| ピン 18 | PTB5 — Port B bit 5 / ADC5 |
| ピン 19 | PTB6 — Port B bit 6 / ADC6 |
| ピン 20 | PTB7 — Port B bit 7 / ADC7 |
| ピン 21 | PTC0 — Port C bit 0 / ADC8 |
| ピン 22 | PTC1 — Port C bit 1 / ADC9 |
| ピン 23 | PTC2 — Port C bit 2 / ADC10 |
| ピン 24 | PTC3 — Port C bit 3 / ADC11 |
| ピン 25 | PTC4 — Port C bit 4 / SS |
| ピン 26 | PTC5 — Port C bit 5 / MOSI |
| ピン 27 | PTC6 — Port C bit 6 / MISO |
| ピン 28 | PTC7 — Port C bit 7 / SPSCK |
| ピン 29 | PTD0 — Port D bit 0 / TxD |
| ピン 30 | PTD1 — Port D bit 1 / RxD |
| ピン 31 | OSC1 — Oscillator input |
| ピン 32 | OSC2 — Oscillator output |
主な用途
MC908JL16CSPE の用途: 6 件s: White Goods and Appliance Control, Battery Charger and Power Management Controllers, Industrial Sensor and Instrumentation Interfaces, Remote Control and Consumer Handheld Devices, HVAC Fan and Pump Motor Control, Educational MCU Trainer and Evaluation Boards.
White Goods and Appliance Control
Use this MPN
おすすめ
Battery Charger and Power Management Controllers
The MC908JL16CSPE's 12-bit accurate internal oscillator and 12-channel ADC make it suitable as a supervisory MCU in 6-12 cell NiMH and Li-ion charging boards. With 16 KB Flash, designers can implement CC/CV charging curves, cell-balancing routines, and safety timers without external memory. The 8 MHz bus frequency is sufficient for low-speed PWM generation at 15 kHz switching, well below audible noise. Use the 16-bit timer PWM channels to drive a high-side n-MOSFET pair and the ADC to monitor cell voltage via a precision resistor divider.
おすすめ
Industrial Sensor and Instrumentation Interfaces
The MC908JL16CSPE integrates a 12-channel 8-bit ADC with sub-17 µs conversion time, ideal for multi-sensor monitoring in industrial process control and building automation panels. With 26 I/O pins, designers can interface the MCU directly to 4-20 mA loop front-ends, thermocouple amplifier outputs, and digital flow-meter pulse trains. The 16 KB Flash program space supports MODBUS RTU protocol stacks and local diagnostic logging. Operate at industrial -40 to +85 C ambient to satisfy DIN-rail mounted control cabinet requirements.
おすすめ
Remote Control and Consumer Handheld Devices
The MC908JL16CSPE's low-power stop and wait modes (sub-µA quiescent current) suit it to battery-powered remote-control designs including TV/STB remote handsets, garage-door openers, and RF keyfobs. The integrated 8 MHz CPU keeps the part responsive to button events, while 16 KB Flash is enough to encode multi-protocol IR transmission tables (RC5, NEC, SIRC) and address-binding logic. A 32-SDIP form factor is friendly for through-hole hobbyist prototype boards using hand-soldered construction.
おすすめ
HVAC Fan and Pump Motor Control
The MC908JL16CSPE's two 16-bit timers generate hardware PWM up to 8-bit resolution, ideal for single-phase brushless DC fan drives and small induction-pump speed controllers. The MCU's 8 MHz CPU runs the algorithm loop within tens of microseconds, leaving headroom for a soft-start ramp and overcurrent trip logic. The 26 digital I/Os let the MCU read tachometer feedback, multiple push-button inputs, and drive a 7-segment LED display via external shift registers. Industrial temperature grade supports residential attic and boiler-room environments.
おすすめ
Educational MCU Trainer and Evaluation Boards
The MC908JL16CSPE is widely used in 8-bit microcontroller textbooks and university labs for HC08 assembly programming instruction. Its generous 32-SDIP package yields a comfortable 0.100 inch row pitch that is breadboard-friendly, and the HC08 ISA is the canonical example for studying accumulator-plus-index addressing modes. 16 KB Flash allows full semester projects (audio player, line-following robot, alarm system) without external memory expansion. The P&E Micro MON08 BDM interface provides single-step debug and watch-point registers for laboratory teaching.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC908JL16CSPE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC68HC908JL16CPE | MC68HC908JK8CPE | MC68HC908JK1CPE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-SDIP (0.400 inch) | 32-SDIP (0.400 inch) - same | 32-SDIP (0.400 inch) - same | 32-SDIP (0.400 inch) - same |
| Core | HC08 8-bit | HC08 8-bit | HC08 8-bit | HC08 8-bit |
| Program Flash | 16 KB | 16 KB | 8 KB (-50%) | 1.5 KB (-91%) |
| RAM | 512 B | 512 B | 1 KB (+100%) | 128 B (-75%) |
| Max Bus Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| I/O Pins | 26 | 26 | 15 (-42%) | 13 (-50%) |
| ADC Channels | 12 ch / 8-bit | 12 ch / 8-bit | 12 ch / 8-bit | 12 ch / 8-bit |
| Timers | 2 x 16-bit | 2 x 16-bit | 2 x 16-bit | 2 x 16-bit |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Lifecycle Status | NRND | NRND | Obsolete | Obsolete |
主な差別化要因
- Largest Flash in JL family SDIP-32 footprint （vs MC68HC908JK8CPE)
- Industry-standard 32-SDIP through-hole form factor （vs MC908JL16CFAE (LQFP))
- Mature HC08 ISA with full M68HC05 object-code compatibility （vs PIC16F877A)
設計ノート
Estimated: at Vdd=5 V and 8 MHz active current approx 9 mA, the MC908JL16CSPE dissipates about 45 mW. Add a 4.7 µF bulk + 0.1 µF ceramic decoupling pair on each Vdd/Vss pin pair to suppress switching noise from internal core transients. In STOP mode the MCU draws under 10 µA; power may be removed from analog peripherals to extend battery life.
Place the 0.1 µF Vdd bypass cap within 50 mil of pins 7-8 and route a single-point ground via to a copper pour. Keep the OSC1/OSC2 traces short and symmetric to reduce stray capacitance; avoid routing high-speed digital traces parallel to the OSC pair. For the SDIP package, keep vias outside the 0.600 inch lead span to ease hand-soldering rework.
The RST pin must be held low during power ramp until Vdd reaches 2.7 V; failure to do so may leave the Flash controller in an indeterminate state. Do not enable the internal oscillator AND connect a crystal simultaneously - select exactly one clock source in the CONFIG register. Stop and Wait modes require interrupts to be cleared before WAI, otherwise the part will not wake.
コンプライアンス情報
The MC908JL16CSPE was originally released with Pb-bearing SDIP package. NXP/Freescale offers Pb-free variants by specific order code suffix (e.g., -ND). Confirm RoHS/REACH status with the manufacturer or with your distributor's shipping carton label. Part is not AEC-Q100 qualified; for automotive use select an AEC-Q100 S08 or Kinetis E-series equivalent.
