MC9S08DN16MLF - 40MHz 8-Bit MCU | NXP Semiconductors
部品番号: MC9S08DN16MLF ✓ 生産中MC9S08DN16MLF 概要
An 8-bit microcontroller is a compact processor designed for embedded control rather than high-performance computing. Its operating hierarchy places it among general-purpose microcontrollers, embedded processors, and semiconductor devices. The S08 architecture is useful for appliance controls, industrial interfaces, measurement equipment, and compact embedded products where deterministic control, modest memory requirements, and broad peripheral integration are more important than a large operating system or graphics workload.
The MC9S08DN16MLF combines 16K × 8 Flash program storage with 1K × 8 RAM and supports as many as 32 interrupt or reset sources. Its 39 I/O pins offer substantial board-level connectivity for sensors, switches, displays, communications links, and actuators. The integrated ADC supports 16 analog inputs at 12-bit resolution, with a 2.5-microsecond conversion time suitable for monitoring changing analog signals without requiring a separate converter.
The device uses an external oscillator, and its documentation identifies an HC08 instruction set with the added BGND instruction. The 40 MHz CPU operates with a 20 MHz bus, creating a clear division between instruction-processing capability and bus bandwidth. Designers must account for this relationship when configuring timing, peripheral clocks, communication baud rates, and interrupt service routines.
Typical uses include industrial control panels, environmental sensors, motor controllers, data-acquisition modules, appliance interfaces, and compact embedded instruments. Its combination of Flash memory, RAM, GPIO, and a multichannel ADC allows a controller to acquire analog measurements and manage external peripherals without duplicating interface hardware on the printed circuit board.
The principal design consideration is package and firmware verification. Use the pin-description table in the manufacturer datasheet when assigning tracks, and confirm peripheral multiplexing before finalizing the PCB. Adequate decoupling, a valid external clock arrangement, and programming access to the Flash memory are essential for reliable operation.
This page combines core device specifications, application-oriented engineering guidance, drop-in candidate information, and a parameter comparison focused on helping designers confirm whether the MC9S08DN16MLF fits an existing 48-LQFP hardware and software platform.
ドロップイン代替品: MC9S08DN16MLF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08DN16MLF (同一形状・フットプリント) — 相違点: Instruction Set, Oscillator Type, ADC Conversion Time, ADC Resolution, Mounting Type.
MC9S08DN16AMLF
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC9S08DV16MLF
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC9S08DN16MLF 最大定格&電気的特性
| Product Type | 8-bit HCS08 microcontroller |
| Series | S08 |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Program Memory Size | 16 KB (16K × 8) |
| Program Memory Type | Flash |
| RAM Size | 1 KB (1K × 8) |
| Number of I/O Pins | 39 pins |
| ADC Resolution | 12 bits |
| ADC Channel Count | 16 channels |
| ADC Conversion Time | 2.5 microseconds |
| Oscillator Type | External oscillator |
| パッケージ | 48-LQFP (7 mm × 7 mm) |
| Packaging | Tray |
| Interrupt and Reset Sources | Up to 32 sources |
| Instruction Set | HC08 with added BGND instruction |
MC9S08DN16MLF 48-lqfp (7 mm × 7 mm) ピン配置ガイド
MC9S08DN16MLF (48-lqfp (7 mm × 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08DN16MLF.
詳細は データシート をご参照ください。
主な用途
MC9S08DN16MLF の用途: 6 件s: Industrial Sensor Monitoring, Appliance Control Panel, Data Acquisition Module, Motor and Actuator Control, Communication Gateway, Environmental Monitoring Device.
Industrial Sensor Monitoring
The MC9S08DN16MLF is suitable for industrial monitoring modules that combine several analog sensors with digital status and alarm signals. Its 16-channel, 12-bit ADC supports measurements from pressure, temperature, and level-sensing stages, while the stated 2.5-microsecond conversion time allows sequential sampling with useful timing margin. The 39 I/O pins can connect switches, indicators, and interface transceivers without an additional I/O expander. With 16 KB Flash and 1 KB RAM, the MCU can host acquisition routines, filtering, threshold logic, diagnostics, and a communication protocol. Design the analog front end around the ADC input limits in the manufacturer datasheet, isolate noisy switching stages, and reserve clean grounding and decoupling paths for accurate measurements.
おすすめ
Appliance Control Panel
The MC9S08DN16MLF fits appliance control panels that coordinate user inputs, indicators, relays, and motor-control signals. Its 39 GPIO pins provide substantial interface capacity for buttons, display segments, status LEDs, and discrete sensors, while the 16 KB Flash memory accommodates control sequences, lookup tables, and diagnostic routines. The 1 KB RAM supports state variables and communication buffering for a compact single-board design. The 12-bit ADC can monitor supply voltage, temperature, or analog feedback from a power-control stage. Because relay and motor nodes can inject transients, use separate protection networks, maintain short return-current paths, and place bulk and high-frequency decoupling capacitors near the controller.
おすすめ
Data Acquisition Module
The MC9S08DN16MLF can serve as the control core of a compact data-acquisition module when each channel must be sampled with greater resolution than an 8-bit alternative. Its 16-channel, 12-bit ADC and stated 2.5-microsecond conversion time support repeated acquisition, scaling, filtering, and thresholding in firmware. The 40 MHz HCS08 CPU provides processing headroom, although the bus operates at 20 MHz and should be used as the basis for memory-access timing. Sixteen kilobytes of Flash and 1 KB RAM are sufficient for focused acquisition firmware, but large sample buffers should be moved to external memory. Use a quiet reference arrangement, balanced routing, and separate analog and digital grounding where the board partition permits.
おすすめ
Motor and Actuator Control
The MC9S08DN16MLF can coordinate motors, valves, relays, and other actuators in compact embedded equipment. Its 39 GPIO pins provide ample connections for control signals, position sensors, limit switches, and fault inputs, while the ADC can supervise current, temperature, or analog position feedback at 12-bit resolution. The 40 MHz CPU supports responsive control routines, but software should account for the 20 MHz bus and peripheral timing. Place output drivers and switching devices away from the MCU analog section, use gate resistors and protection networks where required, and provide local bulk capacitance at every power stage. Firmware should include startup delays, current limiting, and safe-state behavior for actuator faults.
おすすめ
Communication Gateway
The MC9S08DN16MLF is applicable to small protocol-conversion or embedded gateway designs where local I/O and serial control are more important than high data throughput. The 16 KB Flash region can hold protocol drivers and configuration logic, while the 1 KB RAM can support command buffers and state machines. Its external-oscillator configuration requires a stable clock source, and the 20 MHz bus should be used for peripheral timing calculations. Use level-appropriate interfaces for RS-485, UART, or other external links rather than driving them directly from the MCU. Keep communication transceivers and protection devices at the board edge, provide controlled return paths for surge currents, and isolate switching-node energy from the S08 clock and ADC circuitry.
おすすめ
Environmental Monitoring Device
The MC9S08DN16MLF supports environmental monitoring products that gather periodic readings from multiple analog and digital sensors. The 12-bit, 16-channel ADC is well matched to temperature, humidity, light, and air-quality sensing front ends, while 39 I/O pins provide connections for sensor enables, alarms, status indicators, and external communications. The 16 KB Flash capacity permits firmware for calibration, filtering, threshold evaluation, and periodic reporting, and the 1 KB RAM can hold recent samples and sensor state. A low-power strategy should deactivate unused peripherals and schedule conversions carefully. Protect sensitive sensor inputs from switching noise and verify the external clock and watchdog behavior before deploying the controller in unattended equipment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08DN16MLF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08DN16AMLF | MC9S08DV16MLF |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7 mm × 7 mm) | 48-LQFP (7 mm × 7 mm) | 48-LQFP (7 mm × 7 mm) |
| CPU Architecture | 8-bit HCS08 | 8-bit S08 | 8-bit S08 |
| Flash Memory | 16 KB | 16 KB | 16 KB |
主な差別化要因
- Double the working RAM of the documented AMLF alternative (vs MC9S08DN16AMLF)
- Higher native ADC resolution (vs MC9S08DN16AMLF)
- Documented 16-channel analog acquisition resource (vs MC9S08DV16MLF)
設計ノート
Route the external clock, reset, and programming signals according to the manufacturer pin-description table before assigning the remaining GPIO functions. The 48-LQFP footprint offers 39 I/O pins, but several functions may be multiplexed. Keep sensitive ADC inputs away from relay, motor, and switching-regulator traces, and use a continuous ground reference beneath the analog section where practical. Verify the land pattern against the 7 mm × 7 mm package drawing and check all exposed or routed supply connections during schematic review.
Place local decoupling capacitors at the S08 supply pins and near every IC that converts or switches the same rail. Add bulk capacitance at the power-source output and use separate return paths for high-current loads. The available operating-voltage limits are not stated here, so obtain them from the MC9S08DN16MLF manufacturer datasheet before selecting regulators or defining undervoltage behavior. Verify startup sequencing, reset release, and brownout margins for the complete board rather than evaluating only the MCU rail in isolation.
Do not treat the related MC9S08DN16AMLF as an automatic firmware-compatible replacement: its documented RAM is 512 B versus 1 KB and its ADC is 10 bits versus 12 bits. Likewise, confirm all MC9S08DV16MLF details before substitution. Review linker memory limits, register definitions, ADC scaling code, pin multiplexing, temperature grade, and clock-tree settings. If firmware exceeds 512 B of RAM or depends on 12-bit conversion results, retain the MC9S08DN16MLF or redesign the application before approving an alternate device.
コンプライアンス情報
The MC9S08DN16MLF compliance attributes require confirmation from the manufacturer product documentation or a material declaration.