MC9S08DN16MLF - 40MHz 8-Bit MCU | NXP Semiconductors
부품 번호: MC9S08DN16MLF ✓ 활성MC9S08DN16MLF 개요
An 8-bit microcontroller is a compact processor designed for embedded control rather than high-performance computing. Its operating hierarchy places it among general-purpose microcontrollers, embedded processors, and semiconductor devices. The S08 architecture is useful for appliance controls, industrial interfaces, measurement equipment, and compact embedded products where deterministic control, modest memory requirements, and broad peripheral integration are more important than a large operating system or graphics workload.
The MC9S08DN16MLF combines 16K × 8 Flash program storage with 1K × 8 RAM and supports as many as 32 interrupt or reset sources. Its 39 I/O pins offer substantial board-level connectivity for sensors, switches, displays, communications links, and actuators. The integrated ADC supports 16 analog inputs at 12-bit resolution, with a 2.5-microsecond conversion time suitable for monitoring changing analog signals without requiring a separate converter.
The device uses an external oscillator, and its documentation identifies an HC08 instruction set with the added BGND instruction. The 40 MHz CPU operates with a 20 MHz bus, creating a clear division between instruction-processing capability and bus bandwidth. Designers must account for this relationship when configuring timing, peripheral clocks, communication baud rates, and interrupt service routines.
Typical uses include industrial control panels, environmental sensors, motor controllers, data-acquisition modules, appliance interfaces, and compact embedded instruments. Its combination of Flash memory, RAM, GPIO, and a multichannel ADC allows a controller to acquire analog measurements and manage external peripherals without duplicating interface hardware on the printed circuit board.
The principal design consideration is package and firmware verification. Use the pin-description table in the manufacturer datasheet when assigning tracks, and confirm peripheral multiplexing before finalizing the PCB. Adequate decoupling, a valid external clock arrangement, and programming access to the Flash memory are essential for reliable operation.
This page combines core device specifications, application-oriented engineering guidance, drop-in candidate information, and a parameter comparison focused on helping designers confirm whether the MC9S08DN16MLF fits an existing 48-LQFP hardware and software platform.
드롭인 대체품: MC9S08DN16MLF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08DN16MLF (동일 폼 팩터 및 풋프린트) — 차이점: Instruction Set, Oscillator Type, ADC Conversion Time, ADC Resolution, Mounting Type.
MC9S08DN16AMLF
✅ 드롭인가격 문의
데이터시트 보기 →MC9S08DV16MLF
✅ 드롭인가격 문의
데이터시트 보기 →MC9S08DN16MLF 최대 정격 & 전기적 특성
| Product Type | 8-bit HCS08 microcontroller |
| Series | S08 |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Program Memory Size | 16 KB (16K × 8) |
| Program Memory Type | Flash |
| RAM Size | 1 KB (1K × 8) |
| Number of I/O Pins | 39 pins |
| ADC Resolution | 12 bits |
| ADC Channel Count | 16 channels |
| ADC Conversion Time | 2.5 microseconds |
| Oscillator Type | External oscillator |
| 패키지 | 48-LQFP (7 mm × 7 mm) |
| Packaging | Tray |
| Interrupt and Reset Sources | Up to 32 sources |
| Instruction Set | HC08 with added BGND instruction |
MC9S08DN16MLF 48-lqfp (7 mm × 7 mm) 핀 구성 가이드
MC9S08DN16MLF(48-lqfp (7 mm × 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08DN16MLF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08DN16MLF 적합 용도: 6 애플리케이션s: Industrial Sensor Monitoring, Appliance Control Panel, Data Acquisition Module, Motor and Actuator Control, Communication Gateway, Environmental Monitoring Device.
Industrial Sensor Monitoring
The MC9S08DN16MLF is suitable for industrial monitoring modules that combine several analog sensors with digital status and alarm signals. Its 16-channel, 12-bit ADC supports measurements from pressure, temperature, and level-sensing stages, while the stated 2.5-microsecond conversion time allows sequential sampling with useful timing margin. The 39 I/O pins can connect switches, indicators, and interface transceivers without an additional I/O expander. With 16 KB Flash and 1 KB RAM, the MCU can host acquisition routines, filtering, threshold logic, diagnostics, and a communication protocol. Design the analog front end around the ADC input limits in the manufacturer datasheet, isolate noisy switching stages, and reserve clean grounding and decoupling paths for accurate measurements.
추천
Appliance Control Panel
The MC9S08DN16MLF fits appliance control panels that coordinate user inputs, indicators, relays, and motor-control signals. Its 39 GPIO pins provide substantial interface capacity for buttons, display segments, status LEDs, and discrete sensors, while the 16 KB Flash memory accommodates control sequences, lookup tables, and diagnostic routines. The 1 KB RAM supports state variables and communication buffering for a compact single-board design. The 12-bit ADC can monitor supply voltage, temperature, or analog feedback from a power-control stage. Because relay and motor nodes can inject transients, use separate protection networks, maintain short return-current paths, and place bulk and high-frequency decoupling capacitors near the controller.
추천
Data Acquisition Module
The MC9S08DN16MLF can serve as the control core of a compact data-acquisition module when each channel must be sampled with greater resolution than an 8-bit alternative. Its 16-channel, 12-bit ADC and stated 2.5-microsecond conversion time support repeated acquisition, scaling, filtering, and thresholding in firmware. The 40 MHz HCS08 CPU provides processing headroom, although the bus operates at 20 MHz and should be used as the basis for memory-access timing. Sixteen kilobytes of Flash and 1 KB RAM are sufficient for focused acquisition firmware, but large sample buffers should be moved to external memory. Use a quiet reference arrangement, balanced routing, and separate analog and digital grounding where the board partition permits.
추천
Motor and Actuator Control
The MC9S08DN16MLF can coordinate motors, valves, relays, and other actuators in compact embedded equipment. Its 39 GPIO pins provide ample connections for control signals, position sensors, limit switches, and fault inputs, while the ADC can supervise current, temperature, or analog position feedback at 12-bit resolution. The 40 MHz CPU supports responsive control routines, but software should account for the 20 MHz bus and peripheral timing. Place output drivers and switching devices away from the MCU analog section, use gate resistors and protection networks where required, and provide local bulk capacitance at every power stage. Firmware should include startup delays, current limiting, and safe-state behavior for actuator faults.
추천
Communication Gateway
The MC9S08DN16MLF is applicable to small protocol-conversion or embedded gateway designs where local I/O and serial control are more important than high data throughput. The 16 KB Flash region can hold protocol drivers and configuration logic, while the 1 KB RAM can support command buffers and state machines. Its external-oscillator configuration requires a stable clock source, and the 20 MHz bus should be used for peripheral timing calculations. Use level-appropriate interfaces for RS-485, UART, or other external links rather than driving them directly from the MCU. Keep communication transceivers and protection devices at the board edge, provide controlled return paths for surge currents, and isolate switching-node energy from the S08 clock and ADC circuitry.
추천
Environmental Monitoring Device
The MC9S08DN16MLF supports environmental monitoring products that gather periodic readings from multiple analog and digital sensors. The 12-bit, 16-channel ADC is well matched to temperature, humidity, light, and air-quality sensing front ends, while 39 I/O pins provide connections for sensor enables, alarms, status indicators, and external communications. The 16 KB Flash capacity permits firmware for calibration, filtering, threshold evaluation, and periodic reporting, and the 1 KB RAM can hold recent samples and sensor state. A low-power strategy should deactivate unused peripherals and schedule conversions carefully. Protect sensitive sensor inputs from switching noise and verify the external clock and watchdog behavior before deploying the controller in unattended equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08DN16MLF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08DN16AMLF | MC9S08DV16MLF |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7 mm × 7 mm) | 48-LQFP (7 mm × 7 mm) | 48-LQFP (7 mm × 7 mm) |
| CPU Architecture | 8-bit HCS08 | 8-bit S08 | 8-bit S08 |
| Flash Memory | 16 KB | 16 KB | 16 KB |
주요 차별점
- Double the working RAM of the documented AMLF alternative (vs MC9S08DN16AMLF)
- Higher native ADC resolution (vs MC9S08DN16AMLF)
- Documented 16-channel analog acquisition resource (vs MC9S08DV16MLF)
설계 노트
Route the external clock, reset, and programming signals according to the manufacturer pin-description table before assigning the remaining GPIO functions. The 48-LQFP footprint offers 39 I/O pins, but several functions may be multiplexed. Keep sensitive ADC inputs away from relay, motor, and switching-regulator traces, and use a continuous ground reference beneath the analog section where practical. Verify the land pattern against the 7 mm × 7 mm package drawing and check all exposed or routed supply connections during schematic review.
Place local decoupling capacitors at the S08 supply pins and near every IC that converts or switches the same rail. Add bulk capacitance at the power-source output and use separate return paths for high-current loads. The available operating-voltage limits are not stated here, so obtain them from the MC9S08DN16MLF manufacturer datasheet before selecting regulators or defining undervoltage behavior. Verify startup sequencing, reset release, and brownout margins for the complete board rather than evaluating only the MCU rail in isolation.
Do not treat the related MC9S08DN16AMLF as an automatic firmware-compatible replacement: its documented RAM is 512 B versus 1 KB and its ADC is 10 bits versus 12 bits. Likewise, confirm all MC9S08DV16MLF details before substitution. Review linker memory limits, register definitions, ADC scaling code, pin multiplexing, temperature grade, and clock-tree settings. If firmware exceeds 512 B of RAM or depends on 12-bit conversion results, retain the MC9S08DN16MLF or redesign the application before approving an alternate device.
규정 준수 정보
The MC9S08DN16MLF compliance attributes require confirmation from the manufacturer product documentation or a material declaration.