MC9S08LG16CLF - 8-Bit 40MHz 18KB Flash LCD MCU | NXP
部品番号: MC9S08LG16CLF ✗ 生産終了MC9S08LG16CLF 概要
The MC9S08LG16CLF belongs to the MC9S08LG family of 8-bit microcontrollers. Its CPU operates from 2.7 V to 5.5 V across the specified temperature ranges, while the LCD-focused feature set supports displays with up to 296 segments. The 18 KB flash capacity provides room for application firmware, display tables, calibration data, and communication routines in a compact embedded control design.
Key characteristics include an 8-bit HCS08 central processing unit, a maximum operating frequency of 40 MHz, and 18 KB of flash memory organized as 18K x 8. The 48-LQFP package exposes the LCD segment and general-purpose I/O resources required by metering and human-interface equipment. The MCU also supports up to 32 interrupt or reset sources according to the family documentation.
The device is identified as NRND by NXP, so it remains documented for legacy and industrial designs but is not positioned as a new-design default. Its 5 V LCD capability and segment-driven architecture make it useful where a dedicated LCD controller, keypad interface, and low-cost embedded control can be consolidated into one device. The 40 MHz maximum clock rate provides additional performance headroom for filtering, measurement, and background processing tasks.
Typical implementations include electricity meters, appliance control panels, HVAC user interfaces, entry-level instrument clusters, and industrial segment displays. In a meter design, the LCD segment outputs can drive the display directly while the HCS08 core performs measurement, calibration, data storage, and communications. The same architecture also suits temperature controllers, pump controllers, and compact equipment panels with dedicated segment layouts.
For new PCB layouts, confirm the exact LCD segment mapping, pin multiplexing, and peripheral assignments in the manufacturer datasheet before routing the display electrodes. The NRND lifecycle status should be checked against the current NXP product-change notice when qualifying supply for production. This page combines device specifications, application guidance, lifecycle information, and design considerations for engineers evaluating the MC9S08LG16CLF.
ドロップイン代替品: MC9S08LG16CLF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08LG16CLF (同一形状・フットプリント) — 相違点: CPU Architecture, Flash Memory, Product Type.
MC9S08LG16VLF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08LG32CLF
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08LG32VLF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08LG16CLF 最大定格&電気的特性
| Product Type | 8-bit HCS08 S08 microcontroller |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 18 KB (18K x 8) |
| Supply Voltage Range | 2.7 V to 5.5 V |
| LCD Segment Support | Up to 296 segments |
| LCD Operating Voltage | 5 V segment operation |
| パッケージ | 48-LQFP (7x7 mm) |
| ピン数 | 48 |
| 実装タイプ | Surface mount |
| CPU Architecture | 8-bit HCS08 with BGND instruction |
| Interrupt and Reset Sources | Up to 32 |
| Temperature Range 1 | -40°C to +85°C |
| Temperature Range 2 | -40°C to +105°C |
| Termination Form | Gull wing |
| Package Code | LFQFP |
| ライフサイクル状態 | NRND |
| RoHS Compliance | Compliant |
| REACH Status | Compliant |
MC9S08LG16CLF lfqfp ピン配置ガイド
MC9S08LG16CLF (lfqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08LG16CLF.
詳細は データシート をご参照ください。
主な用途
MC9S08LG16CLF の用途: 6 件s: Electric Metering and Utility Displays, Home Appliance Control Panels, HVAC User Interfaces and Equipment Displays, Entry-Level Instrument Clusters, Industrial Measurement and Metering Panels, Compact Embedded Control and Sensor Displays.
Electric Metering and Utility Displays
The MC9S08LG16CLF is well suited to electric meters because the MC9S08LG family provides 5 V segment LCD drive for displays with up to 296 segments. Its 8-bit HCS08 CPU can execute measurement conditioning, calibration, tamper detection, and billing logic, while 18 KB of flash holds firmware and display tables. Placing the MCU and LCD driver in one package reduces board area and avoids a separate segment controller.
おすすめ
Home Appliance Control Panels
Appliance panels benefit from the MC9S08LG16CLF's combination of 40 MHz processing capability, 18 KB flash, and direct segment LCD support. The MCU can manage keypad inputs, relay or motor commands, temperature acquisition, and display updates in one embedded controller. Its 2.7 V to 5.5 V operating range also allows design work across legacy 5 V appliance electronics and mixed-signal control boards.
おすすめ
HVAC User Interfaces and Equipment Displays
The MC9S08LG16CLF supports HVAC systems that use dedicated segment LCDs for temperature, fan state, operating mode, and status indicators. Its 18 KB flash is sufficient for embedded control code, display formatting, sensor conversion routines, and configuration storage, while the 40 MHz CPU leaves performance margin for filtering and background tasks. The family also targets industrial environments where a dedicated display controller adds unnecessary cost.
おすすめ
Entry-Level Instrument Clusters
The MC9S08LG16CLF can consolidate low-speed instrument-cluster functions into an 8-bit control solution. The MC9S08LG family's support for up to 296 segments allows dense displays to show numeric measurements, annunciators, and status legends, while the HCS08 CPU handles sensing and control logic. This is especially useful for industrial equipment and automotive products where a compact 48-LQFP package and a 5 V display bus are preferred.
おすすめ
Industrial Measurement and Metering Panels
Industrial meter panels can use the MC9S08LG16CLF to drive a segment LCD while performing acquisition, scaling, limits checking, and local configuration. The 40 MHz maximum HCS08 frequency provides headroom for digital filtering and communication routines, and the 18 KB flash avoids external program memory in moderate-complexity designs. Its documented voltage and temperature ranges support industrial equipment qualification when the exact ordering grade is selected appropriately.
おすすめ
Compact Embedded Control and Sensor Displays
The MC9S08LG16CLF is appropriate for compact embedded controllers that need a readable local display without the overhead of a graphical LCD controller. Firmware can combine keypad scanning, sensor conditioning, threshold logic, and segment updates within the 18 KB flash budget. The 48-LQFP 7x7 mm package keeps the footprint small for space-constrained industrial modules, while 5 V segment capability simplifies compatibility with many legacy display assemblies.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08LG16CLF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08LG16VLF | MC9S08LG32CLF | MC9S08LG32VLF |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| CPU Architecture | 8-bit HCS08 S08 | 8-bit HCS08 S08 | 8-bit HCS08 S08 | 8-bit HCS08 S08 |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| LCD Segment Support | Up to 296 segments | Up to 296 segments | Up to 296 segments | Up to 296 segments |
主な差別化要因
- Dedicated segment LCD integration in an 8-bit MCU (vs MC9S08LG16VLF)
- Established 18 KB flash configuration for embedded metering firmware (vs MC9S08LG32CLF)
- 40 MHz performance headroom for local measurement and control (vs MC9S08LG32VLF)
設計ノート
Assign LCD segment outputs only after checking the exact segment-to-pin mapping in the MC9S08LG16 family datasheet. Because many LCD functions are multiplexed with general-purpose I/O, firmware configuration can change the electrical use of adjacent pins. Reserve test points for the segment lines and keep external signal routing away from display glass connections where possible.
The MC9S08LG16CLF supports a 2.7 V to 5.5 V supply range and the LG family provides 5 V segment operation. Decouple the core and analog supply pins according to the manufacturer layout, place the required bulk and bypass capacitors close to their pins, and verify LCD drive-voltage timing at the temperature extremes used by the product.
Do not treat a same-package family member as a transparent substitution. The LG16 and LG32 devices occupy the same 48-LQFP footprint, but flash resources, temperature-grade codes, LCD routing, and configuration data can differ. Review the ordering code, memory size, pin function table, and existing firmware configuration before approving any substitute.
Because NXP lists the MC9S08LG16CLF as NRND, validate lifecycle risk rather than relying on a single distributor's stock position. Check the product-change notice, design a second source, and freeze the firmware and LCD configuration once the component is approved for an ongoing industrial or automotive program.
コンプライアンス情報
RoHS compliance and REACH status are identified in the distributor product information. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status were not identified for the exact ordering code.