Motorola

MC9S08RD16CFJ - 8-Bit 8MHz 16KB Flash MCU | Motorola

部品番号: MC9S08RD16CFJ ✓ 生産中
2.5 V or 3.3 V Vdss 32-LQFP, 7 x 7 mm Package 8 MHz Speed 16 KB Memory
MOQ: 1 |

MC9S08RD16CFJ 概要

Motorola MC9S08RD16CFJ is an 8-bit S08 microcontroller operating at up to 8 MHz, with 16 KB of flash program memory organized as 16K x 8 bits, in a 32-LQFP 7 x 7 mm package. It is designed for embedded control applications requiring a compact surface-mount microcontroller, an established HC08/S08 instruction architecture, and operation from 2.5 V or 3.3 V supply rails.

An S08 microcontroller is an 8-bit embedded processor within the broader hierarchy of microcontrollers, embedded processors, and semiconductor devices. The S08 family targets cost-sensitive control systems that combine flash memory, digital peripherals, timers, serial interfaces, and interrupt-driven firmware in one device. MC9S08RD16CFJ occupies the lower end of the S08 RD family in memory capacity while retaining an 8 MHz system clock.

The principal device characteristics visible in the manufacturer and distributor records are the 8 MHz operating frequency, 16 KB flash memory, 8-bit CISC processor, 2.5 V or 3.3 V supply support, and 32-LQFP package. The LQFP package provides 32 external connections and a 7 x 7 mm body size, making it suitable for compact consumer, industrial, appliance, and general-purpose embedded-control boards.

The HC08/S08 architecture uses an 8-bit CISC execution model intended for straightforward control loops, digital I/O handling, timers, and communication tasks. Flash memory allows firmware to be programmed and updated in the field, while the 8 MHz clock provides sufficient processing bandwidth for supervisory tasks and moderate peripheral workloads. Exact RAM size, EEPROM capacity, peripheral configuration, and timing characteristics should be confirmed in the MC9S08RD16 device documentation before final schematic and firmware design.

Typical uses for MC9S08RD16CFJ include appliance controls, small motor controllers, building equipment interfaces, sensor nodes, remote controls, and compact consumer products. Its 8-bit architecture is especially appropriate when firmware primarily coordinates digital inputs, drives discrete outputs, operates timers, and communicates through a UART, SPI, or I2C peripheral. The 32-LQFP footprint is useful where a small PCB area and exposed lead visibility during inspection are priorities.

PCB design should preserve the device-specific pin assignments, power and decoupling requirements, clock connections, programming interface, and exposed thermal-pad or thermal-via strategy stated in the manufacturer documentation. Place the input capacitors and bulk or bypass capacitance close to the supply pins, route programming signals away from sensitive analog or high-speed switching nodes, and verify the recommended clock and reset implementation before production release.

This product record combines the exact orderable MPN, package and memory details, source-backed comparisons, and practical selection guidance. It also identifies where design engineers must consult the complete MC9S08RD16 documentation for RAM, EEPROM, peripheral, electrical-limit, and pin-function details before committing a new PCB layout.

ドロップイン代替品: MC9S08RD16CFJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

MC9S08RD16CFB

✅ ドロップイン ⚠️ 仕様未検証
📦 32-LQFP (7x7 mm)
Identical 8 MHz S08 core, 16 KB flash, 32-LQFP footprint and pin arrangement; temperature-grade suffix differs, with the B-grade specified to +105 C versus +85 C for MC9S08RD16CFJ.

📋 参考代替品(カタログ未掲載)

MC9S08RD16CFA

✅ ドロップイン ⚠️ 仕様未検証
📦 32-LQFP (7x7 mm)
Identical 8 MHz S08 core, 16 KB flash, 32-LQFP footprint and pin arrangement; temperature-grade suffix differs, with the A-grade specified to +125 C versus +85 C for MC9S08RD16CFJ.

📋 参考代替品(カタログ未掲載)

MC9S08RD16CFJ 最大定格&電気的特性

Microcontroller Type 8-bit microcontroller
Processor Core HC08/S08 CISC core
最大クロック周波数 8 MHz
Flash Memory Size 16 KB
Flash Organization 16K x 8 bits
電源電圧 2.5 V or 3.3 V
パッケージ 32-LQFP, 7 x 7 mm
ピン数 32 pins
実装タイプ Surface mount

MC9S08RD16CFJ 32-lqfp, 7 x 7 mm ピン配置ガイド

MC9S08RD16CFJ (32-lqfp, 7 x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MC9S08RD16CFJ の 32-lqfp, 7 x 7 mm パッケージピン配置図

詳細なピン配置データはありません: MC9S08RD16CFJ.

詳細は データシート をご参照ください。

主な用途

MC9S08RD16CFJ の用途: 6 件s: Appliance Control, Industrial Sensor Node, Small Motor Controller, Remote Control, Building Equipment Interface, Consumer Electronics.

🔧

Appliance Control

MC9S08RD16CFJ fits compact appliance-control boards that coordinate push buttons, relays, indicators, and a small display. Its 8-bit S08 processor operates at up to 8 MHz, while 16 KB of flash provides room for operating modes, safety checks, and user-interface state machines. The 2.5 V or 3.3 V operating capability supports low-voltage designs, and the 32-LQFP package keeps the controller compact. Firmware should organize real-time tasks around the device timers and interrupt architecture rather than rely on blocking delays.

🏭

Industrial Sensor Node

MC9S08RD16CFJ is appropriate for a small industrial sensor node that gathers digital measurements and reports status over a serial link. The 16 KB flash capacity accommodates protocol handling, calibration data, and device identification, while the 8 MHz clock supports interrupt-driven acquisition and periodic communication. A 32-LQFP footprint simplifies routing to discrete sensors and interface components. The design must confirm the exact peripheral set, RAM allocation, and I/O voltage limits in the MC9S08RD16 documentation before final sensor selection.

⚡

Small Motor Controller

MC9S08RD16CFJ can manage a small brushed-motor or actuator-control subsystem when the timing and current requirements remain within the S08 RD family's limits. Its 8 MHz CISC core can execute duty-cycle control, limit detection, and fault-state routines, and the 16 KB flash supports compact control firmware. The 32-LQFP package leaves perimeter pins for control signals and feedback. Designers should use external driver circuitry for current switching and verify PWM, timer, and thermal requirements against the complete device documentation.

📱

Remote Control

MC9S08RD16CFJ suits a compact remote-control product with buttons, indicators, and a host interface. The S08 architecture supports straightforward key scanning, debouncing, command encoding, and low-power state management without requiring a high-complexity processor. Its 8 MHz operating speed and 16 KB flash provide ample capacity for compact application firmware, while the 32-LQFP package supports a small PCB. Battery life depends on the implementation, so use the recommended clock, sleep, and wake-up configuration when designing the product.

🏭

Building Equipment Interface

MC9S08RD16CFJ is suitable for a dedicated building-equipment interface that translates switches and sensors into commands for another controller. The 8-bit S08 core can handle digital filtering, status LEDs, timing, and serial reporting, while 16 KB flash is suitable for configuration and diagnostic routines. The 3.3 V operating option supports conventional control logic, and the 32-LQFP footprint is compact for multi-function boards. Exact communication peripherals, pin multiplexing, and reset behavior must be checked against the exact MC9S08RD16CFJ documentation.

🧩

Consumer Electronics

MC9S08RD16CFJ can serve as the embedded controller in a cost-sensitive consumer product such as a small accessory, controller, or household module. Its 8 MHz S08 core provides adequate throughput for sequential logic and peripheral management, while 16 KB flash supports a focused firmware image. The 32-LQFP 7 x 7 mm package supports compact assembly, and 2.5 V or 3.3 V operation offers flexibility in low-voltage power architectures. Firmware and external component choices should be validated for production test, programming, and end-of-line functional coverage.

What is MC9S08RD16CFJ?
MC9S08RD16CFJ is an 8-bit Motorola S08 flash microcontroller rated for operation at up to 8 MHz and containing 16 KB of flash memory. According to the manufacturer-linked MC9S08RD16 documentation and distributor product records, the device uses an HC08/S08 CISC core, supports 2.5 V or 3.3 V operation, and is packaged in a 32-LQFP 7 x 7 mm surface-mount package.
How much flash memory does MC9S08RD16CFJ have?
The MC9S08RD16CFJ provides 16 KB of flash program memory, organized as 16K x 8 bits. This storage is intended for firmware, constants, boot logic, and application code in compact embedded products. The manufacturer product records identify the device as an S08 8-bit MCU with an 8 MHz clock and 16 KB flash, while RAM and EEPROM capacity require confirmation from the complete MC9S08RD16 documentation.
What is the operating voltage of MC9S08RD16CFJ?
MC9S08RD16CFJ supports 2.5 V or 3.3 V operation. According to the MC9S08RD16 technical listing, the part is a 2.5 V or 3.3 V S08 microcontroller. Circuit designers should still use the electrical-characteristics tables to confirm voltage tolerances, operating modes, I/O limits, and power-consumption conditions for the selected clock and peripheral configuration.
What package does MC9S08RD16CFJ use?
MC9S08RD16CFJ uses a 32-LQFP package with a 7 x 7 mm body. The manufacturer-linked records consistently identify the device as a 32-pin LQFP, and its surface-mount leads support compact PCB assembly. Because the LQFP outline can differ electrically and mechanically among similar-looking devices, use the MC9S08RD16 pin-description and land-pattern information when assigning tracks.
What is the maximum clock frequency of MC9S08RD16CFJ?
The maximum listed clock frequency for MC9S08RD16CFJ is 8 MHz. This 8 MHz S08 core is intended for embedded-control workloads such as digital I/O sequencing, timers, status logic, and low-to-moderate-rate serial communication. Firmware timing and any peripheral clocking assumptions should be checked against the MC9S08RD16 clock and bus timing documentation.
Where can I download the MC9S08RD16CFJ datasheet PDF?
The MC9S08RD16CFJ datasheet and pin information are available through the linked MC9S08RD16 datasheet record. The document is hosted on the AllDataSheet portal and is presented as the Motorola MC9S08RD16 technical document. Use its pin-description table, electrical characteristics, memory map, and package drawings when creating the schematic or validating the 32-LQFP footprint.
Where can I find the MC9S08RD16CFJ pinout?
The MC9S08RD16CFJ pinout is documented in the pin-description and package sections of the MC9S08RD16 datasheet. The device has 32 pins in an LQFP package, but each signal assignment should be copied from the exact MC9S08RD16CFJ ordering information rather than inferred from an unrelated S08 model. Pay particular attention to power, ground, reset, clock, programming, and multiplexed peripheral pins.
Is MC9S08RD16CFJ suitable for embedded control applications?
MC9S08RD16CFJ is suitable for compact embedded-control applications where an 8-bit processor, 8 MHz clock, and 16 KB flash are sufficient. The S08 CISC architecture is appropriate for timers, digital control, simple user interfaces, and peripheral coordination. Select it when firmware and peripheral requirements fit the device rather than when the application needs large RAM, high-speed control, or high-resolution analog processing.
MC9S08RD16CFJ vs MC9S08RD16 - what is the difference?
MC9S08RD16CFJ is the exact 32-LQFP 7 x 7 mm orderable version of the MC9S08RD16 family, while MC9S08RD16 is the base-family designation used in the datasheet and product-page listings. Both records describe an 8-bit S08 device with an 8 MHz clock and 16 KB flash. Ordering, temperature-grade, and suffix details should be checked against the exact part-number documentation before substitution.
When should I choose MC9S08RD16CFJ over another 8-bit MCU?
Choose MC9S08RD16CFJ when the design requires the S08 instruction set, an 8 MHz operating speed, 16 KB of flash, 2.5 V or 3.3 V supply support, and the 32-LQFP footprint. It is a strong fit for traditional appliance and control products. Consider a different MCU when the application needs more RAM, faster execution, a larger peripheral set, or a newer software ecosystem.
What can replace MC9S08RD16CFJ?
MC9S08RD16CFJ should be replaced only by a device confirmed to match its 32-LQFP land pattern, pin functions, electrical limits, clock behavior, memory map, and firmware requirements. Same-package appearance alone does not establish compatibility. Use the Request a Quote form on this page to request assistance with an exact-fit sourcing or legacy-component replacement review.
Is there a drop-in replacement for MC9S08RD16CFJ?
A drop-in replacement for MC9S08RD16CFJ must preserve the 32-LQFP footprint, pin assignments, supply range, clock configuration, memory organization, bootloader behavior, and peripheral functions. The MC9S08RD16CFJ itself is the exact-orderable 32-LQFP 7 x 7 mm device for this family. Request a quote if an approved second source or legacy replacement is required for your production program.
Where can I buy MC9S08RD16CFJ online?
MC9S08RD16CFJ can be requested through the Request a Quote form on this page. The quote request allows buyers to specify quantity, packaging preference, target date, and production requirements without relying on a static price. Current commercial terms should be confirmed through that form because inventory, lot traceability, and lead time can vary by order configuration.
What is the price of MC9S08RD16CFJ?
Current commercial terms for MC9S08RD16CFJ are handled through the Request a Quote form on this page. The form supports quantity and lead-time review while keeping the commercial offer tied to the requested order configuration. For production planning, include the required package form, annual usage, target date, and any lot-traceability requirements in the request.
What is the lead time and stock status for MC9S08RD16CFJ?
MC9S08RD16CFJ is shown as in stock in the referenced distributor result, but current stock, minimum order quantity, and lead time should be confirmed through the Request a Quote form on this page. Availability can change with quantity and packaging. Provide your forecast and production schedule so the commercial response reflects the actual build plan.

エンジニアリング参考データ: MC9S08RD16CFJ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MC9S08RD16CFJ for a compact embedded-control design that requires the S08 architecture, an 8 MHz clock, 16 KB flash, 2.5 V or 3.3 V operation, and the 32-LQFP footprint. It is appropriate for appliance controls, building-equipment interfaces, remote controls, and small consumer modules where an 8-bit processor provides adequate performance. MC9S08RD16CFB is the relevant choice when the enclosure or operating environment reaches as high as +105 C, while MC9S08RD16CFA extends the upper rating to +125 C. For either alternative, confirm that the temperature grade, electrical limits, memory map, and pin functions match the existing design. Move to a larger 8-bit or 32-bit MCU when the firmware exceeds the available memory, when timing performance is inadequate, or when the design requires a broader peripheral set or a newer development ecosystem.

代替品との比較

パラメータ この製品 MC9S08RD16CFB MC9S08RD16CFA
Brand Motorola Motorola Motorola
Package 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm)
Processor Core HC08/S08 8-bit CISC HC08/S08 8-bit CISC HC08/S08 8-bit CISC
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz
Flash Memory 16 KB (16K x 8 bits) 16 KB (16K x 8 bits) 16 KB (16K x 8 bits)
Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V
Temperature Grade -40 C to +85 C -40 C to +105 C -40 C to +125 C
Microcontroller Category 8-bit flash MCU 8-bit flash MCU 8-bit flash MCU

主な差別化要因

  • Standard industrial temperature option (vs MC9S08RD16CFA)
  • Lower-cost application profile (vs MC9S08RD16CFB)
  • Identical core and memory organization (vs MC9S08RD16CFB)

設計ノート

Assign every PCB net from the MC9S08RD16 pin-description table rather than from the physical LQFP position alone. Confirm that power, ground, reset, clock, programming, and multiplexed peripheral functions match the exact suffix. Place the required bypass capacitor adjacent to the supply pins, provide adequate ground-return paths, and follow the manufacturer land-pattern dimensions for the 32-LQFP 7 x 7 mm outline.

Design the supply network for the device's 2.5 V or 3.3 V operating range and verify current limits, tolerance, and ripple against the electrical-characteristics tables. Use local high-frequency bypass capacitance and a nearby bulk-capacitor reservoir to control transient response. If the MCU drives loads through the same supply rail, separate high-current paths from sensitive traces and prevent switching noise from propagating back into the regulator output.

Do not substitute an S08 device based only on its 32-LQFP outline. Firmware compatibility and PCB interchangeability can depend on memory organization, peripheral mapping, reset behavior, pin multiplexing, clock configuration, and supply limits. For a new board, use MC9S08RD16CFJ only after checking the complete datasheet and reference design; for an existing PCB, compare those functions line by line before approving a drop-in replacement.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MC9S08RD16CFJ datasheet MC9S08RD16CFJ pinout MC9S08RD16CFJ datasheet pdf Motorola MC9S08RD16CFJ MC9S08RD16CFJ specifications MC9S08RD16CFJ 32-LQFP pinout MC9S08RD16CFJ application circuit MC9S08RD16CFJ equivalent MC9S08RD16CFJ replacement MC9S08RD16CFJ vs MC9S08RD16CFB MC9S08RD16CFJ price MC9S08RD16CFJ stock MC9S08RD16CFJ footprint MC9S08RD16CFJ cross reference

関連部品&用語

Motorola MC9S08RD16CFJ MC9S08RD16 MC9S08RD16CFB MC9S08RD16CFA S08 microcontroller HC08 architecture 8-bit microcontroller CISC processor embedded microcontroller microcontroller embedded processor semiconductor flash memory 16 KB flash memory 8 MHz clock 2.5 V supply 3.3 V supply 32-LQFP LQFP package family surface mount SMD appliance control industrial sensor node
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示