MC9S08RD16CFJ - 8-Bit 8MHz 16KB Flash MCU | Motorola
料号: MC9S08RD16CFJ ✓ 量产中MC9S08RD16CFJ 概述
An S08 microcontroller is an 8-bit embedded processor within the broader hierarchy of microcontrollers, embedded processors, and semiconductor devices. The S08 family targets cost-sensitive control systems that combine flash memory, digital peripherals, timers, serial interfaces, and interrupt-driven firmware in one device. MC9S08RD16CFJ occupies the lower end of the S08 RD family in memory capacity while retaining an 8 MHz system clock.
The principal device characteristics visible in the manufacturer and distributor records are the 8 MHz operating frequency, 16 KB flash memory, 8-bit CISC processor, 2.5 V or 3.3 V supply support, and 32-LQFP package. The LQFP package provides 32 external connections and a 7 x 7 mm body size, making it suitable for compact consumer, industrial, appliance, and general-purpose embedded-control boards.
The HC08/S08 architecture uses an 8-bit CISC execution model intended for straightforward control loops, digital I/O handling, timers, and communication tasks. Flash memory allows firmware to be programmed and updated in the field, while the 8 MHz clock provides sufficient processing bandwidth for supervisory tasks and moderate peripheral workloads. Exact RAM size, EEPROM capacity, peripheral configuration, and timing characteristics should be confirmed in the MC9S08RD16 device documentation before final schematic and firmware design.
Typical uses for MC9S08RD16CFJ include appliance controls, small motor controllers, building equipment interfaces, sensor nodes, remote controls, and compact consumer products. Its 8-bit architecture is especially appropriate when firmware primarily coordinates digital inputs, drives discrete outputs, operates timers, and communicates through a UART, SPI, or I2C peripheral. The 32-LQFP footprint is useful where a small PCB area and exposed lead visibility during inspection are priorities.
PCB design should preserve the device-specific pin assignments, power and decoupling requirements, clock connections, programming interface, and exposed thermal-pad or thermal-via strategy stated in the manufacturer documentation. Place the input capacitors and bulk or bypass capacitance close to the supply pins, route programming signals away from sensitive analog or high-speed switching nodes, and verify the recommended clock and reset implementation before production release.
This product record combines the exact orderable MPN, package and memory details, source-backed comparisons, and practical selection guidance. It also identifies where design engineers must consult the complete MC9S08RD16 documentation for RAM, EEPROM, peripheral, electrical-limit, and pin-function details before committing a new PCB layout.
直接替换替代料: MC9S08RD16CFJ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MC9S08RD16CFB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC9S08RD16CFA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC9S08RD16CFJ 最大额定值与电气特性
| Microcontroller Type | 8-bit microcontroller |
| Processor Core | HC08/S08 CISC core |
| 最大时钟频率 | 8 MHz |
| Flash Memory Size | 16 KB |
| Flash Organization | 16K x 8 bits |
| 电源电压 | 2.5 V or 3.3 V |
| 封装 | 32-LQFP, 7 x 7 mm |
| 引脚数 | 32 pins |
| 安装类型 | Surface mount |
MC9S08RD16CFJ 32-lqfp, 7 x 7 mm 引脚配置指南
MC9S08RD16CFJ(32-lqfp, 7 x 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MC9S08RD16CFJ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08RD16CFJ 适用于 6 应用s: Appliance Control, Industrial Sensor Node, Small Motor Controller, Remote Control, Building Equipment Interface, Consumer Electronics.
Appliance Control
MC9S08RD16CFJ fits compact appliance-control boards that coordinate push buttons, relays, indicators, and a small display. Its 8-bit S08 processor operates at up to 8 MHz, while 16 KB of flash provides room for operating modes, safety checks, and user-interface state machines. The 2.5 V or 3.3 V operating capability supports low-voltage designs, and the 32-LQFP package keeps the controller compact. Firmware should organize real-time tasks around the device timers and interrupt architecture rather than rely on blocking delays.
Industrial Sensor Node
MC9S08RD16CFJ is appropriate for a small industrial sensor node that gathers digital measurements and reports status over a serial link. The 16 KB flash capacity accommodates protocol handling, calibration data, and device identification, while the 8 MHz clock supports interrupt-driven acquisition and periodic communication. A 32-LQFP footprint simplifies routing to discrete sensors and interface components. The design must confirm the exact peripheral set, RAM allocation, and I/O voltage limits in the MC9S08RD16 documentation before final sensor selection.
Small Motor Controller
MC9S08RD16CFJ can manage a small brushed-motor or actuator-control subsystem when the timing and current requirements remain within the S08 RD family's limits. Its 8 MHz CISC core can execute duty-cycle control, limit detection, and fault-state routines, and the 16 KB flash supports compact control firmware. The 32-LQFP package leaves perimeter pins for control signals and feedback. Designers should use external driver circuitry for current switching and verify PWM, timer, and thermal requirements against the complete device documentation.
Remote Control
MC9S08RD16CFJ suits a compact remote-control product with buttons, indicators, and a host interface. The S08 architecture supports straightforward key scanning, debouncing, command encoding, and low-power state management without requiring a high-complexity processor. Its 8 MHz operating speed and 16 KB flash provide ample capacity for compact application firmware, while the 32-LQFP package supports a small PCB. Battery life depends on the implementation, so use the recommended clock, sleep, and wake-up configuration when designing the product.
Building Equipment Interface
MC9S08RD16CFJ is suitable for a dedicated building-equipment interface that translates switches and sensors into commands for another controller. The 8-bit S08 core can handle digital filtering, status LEDs, timing, and serial reporting, while 16 KB flash is suitable for configuration and diagnostic routines. The 3.3 V operating option supports conventional control logic, and the 32-LQFP footprint is compact for multi-function boards. Exact communication peripherals, pin multiplexing, and reset behavior must be checked against the exact MC9S08RD16CFJ documentation.
Consumer Electronics
MC9S08RD16CFJ can serve as the embedded controller in a cost-sensitive consumer product such as a small accessory, controller, or household module. Its 8 MHz S08 core provides adequate throughput for sequential logic and peripheral management, while 16 KB flash supports a focused firmware image. The 32-LQFP 7 x 7 mm package supports compact assembly, and 2.5 V or 3.3 V operation offers flexibility in low-voltage power architectures. Firmware and external component choices should be validated for production test, programming, and end-of-line functional coverage.
工程参考数据: MC9S08RD16CFJ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S08RD16CFB | MC9S08RD16CFA |
|---|---|---|---|
| Brand | Motorola | Motorola | Motorola |
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Processor Core | HC08/S08 8-bit CISC | HC08/S08 8-bit CISC | HC08/S08 8-bit CISC |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 16 KB (16K x 8 bits) | 16 KB (16K x 8 bits) | 16 KB (16K x 8 bits) |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Temperature Grade | -40 C to +85 C | -40 C to +105 C | -40 C to +125 C |
| Microcontroller Category | 8-bit flash MCU | 8-bit flash MCU | 8-bit flash MCU |
关键差异点
- Standard industrial temperature option (对比 MC9S08RD16CFA)
- Lower-cost application profile (对比 MC9S08RD16CFB)
- Identical core and memory organization (对比 MC9S08RD16CFB)
设计说明
Assign every PCB net from the MC9S08RD16 pin-description table rather than from the physical LQFP position alone. Confirm that power, ground, reset, clock, programming, and multiplexed peripheral functions match the exact suffix. Place the required bypass capacitor adjacent to the supply pins, provide adequate ground-return paths, and follow the manufacturer land-pattern dimensions for the 32-LQFP 7 x 7 mm outline.
Design the supply network for the device's 2.5 V or 3.3 V operating range and verify current limits, tolerance, and ripple against the electrical-characteristics tables. Use local high-frequency bypass capacitance and a nearby bulk-capacitor reservoir to control transient response. If the MCU drives loads through the same supply rail, separate high-current paths from sensitive traces and prevent switching noise from propagating back into the regulator output.
Do not substitute an S08 device based only on its 32-LQFP outline. Firmware compatibility and PCB interchangeability can depend on memory organization, peripheral mapping, reset behavior, pin multiplexing, clock configuration, and supply limits. For a new board, use MC9S08RD16CFJ only after checking the complete datasheet and reference design; for an existing PCB, compare those functions line by line before approving a drop-in replacement.
合规信息
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN.