MCF51MM256CLK - 50MHz 32-Bit MCU 256KB Flash | NXP
部品番号: MCF51MM256CLK ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MCF51MM256CLK 概要
The ColdFire V1 MCU is a member of the 32-bit microcontroller hierarchy: MCU, embedded processor, ColdFire architecture, and semiconductor. Its 50 MHz core provides deterministic control performance for meters, industrial equipment, medical instruments, human-interface systems, and connected products. The 256 KB flash configuration provides embedded firmware storage while supporting integration of measurement routines, display control, communications, and application-specific logic.
Key documented features include 32-bit processing, 50 MHz operation, 256 KB flash memory, USB connectivity, graphic-display support, and precision analog measurement capability. The product is identified as the MCF51MM256/128 family and is associated with low-cost, low-power, high-performance embedded designs. Its 80-LQFP package provides a clearly defined PCB footprint and external connectivity for memory, peripherals, analog interfaces, and control signals.
The MCF51MM256CLK is suitable for handheld metering devices, medical products, industrial instrumentation, and embedded systems that need a balance of processing performance, analog measurement, connectivity, and low power. The ColdFire V1 architecture is especially relevant when firmware benefits from 32-bit addressability and higher computational capability without moving immediately to a more complex application processor.
Designers should verify the complete pinout, electrical limits, clock requirements, memory configuration, USB implementation, and analog settling requirements against the NXP manufacturer datasheet before layout or firmware deployment. Because the part is listed as End of Life by NXP, new production designs should confirm lifecycle status and evaluate an approved successor or redesign plan.
This page combines the verified manufacturer and distributor identity, available package and memory information, sourcing context, and practical engineering considerations. It is intended to help engineers determine whether the legacy MCF51MM256CLK remains suitable for maintenance, repair, or controlled legacy production.
ドロップイン代替品: MCF51MM256CLK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCF51MM256CLK （同一形状・フットプリント） — 相違点: Package, Core Architecture, Mounting Type, Flash Memory, Lifecycle Status.
クイック比較ツール — 並列比較する代替部品を選択:
MCF51EM256CLL
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MCF51MM256CLK 最大定格＆電気的特性
| Product Type | 32-bit microcontroller (MCU) |
| Architecture | ColdFire V1 |
| 最大クロック周波数 | 50 MHz |
| Flash Memory | 256 KB (256K x 8) |
| Core Width | 32 bit |
| パッケージ | 80-LQFP (12 x 12 mm) |
| Package Pin Count | 80 pins |
| Temperature Grade | Industrial |
| Terminal Form | Gull wing |
| USB Connectivity | Supported by MCF51MM256/128 family |
| Graphic Display Support | Supported by MCF51MM256/128 family |
| Analog Measurement Capability | Precision analog measurement capability |
| Power Characteristics | Ultra-low-power operation supported by family |
| Operating Voltage | 2.5 V / 3.3 V |
| Manufacturer | NXP Semiconductors |
| ライフサイクル状態 | End of Life |
| Datasheet | MCF51MM256/128 manufacturer data sheet |
MCF51MM256CLK 80 pins ピン配置ガイド
MCF51MM256CLK (80 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCF51MM256CLK.
詳細は データシート をご参照ください。
主な用途
MCF51MM256CLK の用途: 6 件s: Handheld Metering, Medical Monitoring Equipment, Industrial Instrumentation, USB-Connected Embedded Products, Graphic Display Interface, Battery-Powered Portable Device.
Handheld Metering
The MCF51MM256CLK fits handheld metering equipment where a 50 MHz 32-bit ColdFire V1 core can support measurement processing, control logic, and user-interface updates while the family provides precision analog capability. Its 256 KB flash gives embedded firmware room for calibration, signal conditioning, display routines, and communications. In a battery-powered meter, verify low-power modes, analog settling, and regulator headroom against the NXP data sheet; the MCU itself does not determine the final measurement accuracy.
おすすめ
Medical Monitoring Equipment
The MCF51MM256CLK is relevant to medical monitoring and portable diagnostic products because NXP identifies the MCF51MM256/128 family as suitable for applications requiring significant precision analog capability. Its 32-bit 50 MHz architecture can coordinate acquisition, filtering, alarms, and interface behavior, while USB connectivity can support a host or service connection. These features do not constitute medical certification; engineers must validate accuracy, safety, EMC, and regulatory requirements at the complete-product level.
おすすめ
Industrial Instrumentation
For industrial instrumentation, the MCF51MM256CLK provides 32-bit processing, 50 MHz operation, and 256 KB flash in an 80-LQFP package suitable for control, acquisition, and communication firmware. The family's USB and analog capabilities can reduce the number of separate functions in a compact instrument. Confirm operating-temperature limits, EMC susceptibility, grounding, and isolation architecture in the final system rather than assuming that the MCU specification covers the complete industrial environment.
おすすめ
USB-Connected Embedded Products
The MCF51MM256CLK is appropriate for legacy embedded products that combine local control with USB connectivity. Its 50 MHz ColdFire V1 core can handle protocol tasks and application logic, and the 256 KB flash can store a substantial embedded image. The USB implementation must follow the NXP electrical, firmware, and layout requirements; include proper bus protection, controlled-impedance routing, grounding, and connector design based on the device data sheet.
おすすめ
Graphic Display Interface
The MCF51MM256CLK can serve as the controller in a compact graphic-display product because the MCF51MM256/128 family is explicitly described as providing graphic-display support. The 32-bit core and 50 MHz clock provide headroom for display updates and user-interface logic, while 256 KB flash stores firmware and graphics resources. Confirm the exact display interface, memory requirements, timing, and pin multiplexing from the complete NXP documentation before selecting it for a new design.
おすすめ
Battery-Powered Portable Device
The ultra-low-power operation attributed to the MCF51MM256/128 family makes this MCU relevant to battery-powered portable equipment, although the actual battery life depends on the complete power architecture and firmware duty cycle. Use the low-power modes, clock settings, and analog sequencing specified by NXP, and account for regulator quiescent current, sensor current, display load, and USB activity. Validate real-world current consumption across standby, active, and measurement states.
おすすめ
エンジニアリング参考データ: MCF51MM256CLK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCF51EM256CLL |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
主な差別化要因
- Verified 50 MHz 32-bit ColdFire V1 performance （vs MCF51EM256CLL)
- Verified 256 KB flash configuration （vs MCF51EM256CLL)
- Documented family capability for USB and graphic displays （vs MCF51EM256CLL)
- Defined industrial 80-LQFP 12 x 12 mm package identity （vs MCF51EM256CLL)
設計ノート
Design the power tree around the verified 2.5 V / 3.3 V operating indication, but confirm every voltage, sequencing, decoupling, and current requirement from the NXP MCF51MM256/128 data sheet. Place bulk and high-frequency decoupling close to the appropriate supply pins, keep analog and digital return paths controlled, and verify regulator headroom for the selected 50 MHz operating mode. Estimated current and dissipation values require the actual load, temperature, and efficiency and therefore are not specified here.
For an 80-LQFP legacy design, preserve the original footprint, pin numbering, pad geometry, and escape-routing strategy when making a like-for-like repair. Route clocks and sensitive analog signals away from high-current switching nodes, use a continuous ground reference where practical, and follow the datasheet’s package and thermal recommendations. Because the exact exposed-pad or thermal-pad arrangement is not present in the supplied verified snippets, inspect the official package drawing before fabrication.
Validate USB, clock, and display interfaces with the actual board stack-up and firmware timing. USB routing should use controlled impedance where required, provide continuous reference planes, and include appropriate protection and return-path continuity. For precision analog measurements, evaluate source impedance, sampling timing, grounding, filtering, and calibration rather than relying only on the MCU’s stated precision-analog capability.
Do not infer a drop-in replacement from a similar MPN, flash size, or family name. The supplied cross-reference evidence does not verify MCF51EM256CLL as pin-compatible with MCF51MM256CLK. For maintenance, confirm package, pinout, supply voltage, clocking, memory map, peripheral functions, interrupt behavior, and firmware dependencies. For new designs, first confirm whether an End of Life MCU is acceptable for the product’s qualification and sourcing plan.
コンプライアンス情報
The supplied verified data does not provide compliance declarations. Do not infer RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status from the distributor listings.
