MCF5206CAB16A - ColdFire V2 32-Bit MPU 16MHz 160-QFP | NVIDIA
部品番号: MCF5206CAB16A ✗ 生産終了MCF5206CAB16A 概要
A microprocessor (MPU) like the ColdFire V2 is a CPU-centric integrated circuit that relies on external memory for program and data storage, in contrast to a microcontroller (MCU) which integrates flash, RAM and peripherals on-die. The ColdFire architecture belongs to the 68k family lineage and is positioned between legacy 8/16-bit MCUs and high-performance application processors. Within NXP's portfolio, the MCF5206 sits in the embedded-MPU segment aimed at industrial control, factory automation, networking edge nodes, and human-machine interface (HMI) terminals where deterministic instruction throughput and a rich peripheral set outweigh the need for zero external memory components.
Key features include the ColdFire V2 core with 32-bit ALU, integrated SDRAM/DDR-style memory controller, DMA engine, timers, UART, I2C, QSPI, CAN, USB device, and general-purpose I/O. The device operates from a 3.3 V supply with 5 V tolerant I/O on selected pins, and the 160-QFP QFP package provides generous board-routing area for legacy designs. The ROMless configuration allows designers to use external boot memory such as parallel NOR flash, supporting flexible firmware upgrades and secure boot schemes in field-deployed equipment.
The ColdFire V2 core uses a variable-length RISC-style instruction set (ColdFire ISA revision A) with a two-stage pipeline, delivering approximately 16 MIPS at 16 MHz while consuming under 300 mW typical. The integrated memory controller supports SDRAM, SRAM and ROM with chip-select glueless interface, reducing external logic. The deterministic interrupt controller and enhanced debug module (single-wire BDM) simplify real-time firmware development, while peripherals such as the Fast Ethernet MAC-ready bus and USB device controller allow direct connectivity to industrial networks and PC hosts.
Typical applications include industrial PLC and motion controllers, factory HMI panels, networked sensor hubs, point-of-sale terminals, medical instrument front-ends, and legacy equipment upgrades where a known ColdFire software base is preserved. The wide operating temperature range and proven ColdFire toolchain (CodeWarrior, GCC ColdFire, Eclipse-based IDEs) make it a stable platform for long-lifecycle industrial products.
When designing with the MCF5206CAB16A, ensure proper decoupling (100 nF + 10 uF bulk) at each VDD/VSS pin pair and maintain a continuous ground plane under the 160-QFP footprint to reduce EMI on the external memory bus. Use series termination on address and data lines when the bus length exceeds 50 mm to preserve signal integrity at 16 MHz.
This page synthesizes distributor pricing, drop-in alternative MPNs from the MCF5206 family, and practical design notes not found in the standalone NXP product brief.
ドロップイン代替品: MCF5206CAB16A — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCF5206CAB16A （同一形状・フットプリント） — 相違点: Core Architecture, Maximum Clock Frequency.
MCF5206ECAB40
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCF5206CFT16A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MCF5206CAB16A 最大定格＆電気的特性
| Core Architecture | ColdFire V2 (MCF520x family) |
| Core Count | 1 |
| データバス幅 | 32-bit |
| 最大クロック周波数 | 16 MHz |
| Program Memory Type | ROMless (external boot memory required) |
| 電源電圧 | 3.3 V |
| パッケージ / ケース | 160-BQFP (28x28 mm) |
| 実装タイプ | Surface Mount |
| Peripherals | UART, I2C, QSPI, CAN, USB Device, Timers, DMA |
| Connectivity | UART, I2C, SPI, CAN, USB |
MCF5206CAB16A 160-bqfp (28x28 mm) ピン配置ガイド
MCF5206CAB16A (160-bqfp (28x28 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCF5206CAB16A.
詳細は データシート をご参照ください。
主な用途
MCF5206CAB16A の用途: 6 件s: Industrial PLC and Motion Controllers, Factory HMI and Operator Panels, Networked Sensor Hubs and Edge Nodes, Point-of-Sale and Retail Terminals, Medical Instrument Front-Ends, Legacy Equipment Upgrades and Replacements.
Industrial PLC and Motion Controllers
The MCF5206CAB16A's 16 MHz ColdFire V2 core, deterministic interrupt controller, and integrated CAN / UART peripherals make it a fit for industrial PLC and motion controller applications where deterministic real-time response and legacy 32-bit codebases matter. Its ROMless architecture allows secure boot from external NOR flash, while the 160-BQFP package gives generous routing channels for the external memory bus on multi-layer control boards. Power dissipation is moderate, allowing fan-less DIN-rail mounting when paired with adequate copper pours. Pin-to-pin compatibility with the MCF5206ECAB40 (40 MHz) enables an in-family performance upgrade path for next-generation controllers without PCB rework, provided firmware timing is revalidated.
おすすめ
Factory HMI and Operator Panels
The MCF5206CAB16A's 32-bit ColdFire V2 core, USB device controller and external memory bus make it a practical host for factory HMI panels driving character or low-resolution graphics LCDs with touch overlays. The 3.3 V core with 5 V tolerant I/O simplifies connection to legacy HMI keypad scanners and optocoupler inputs, while the integrated QSPI eases attachment of serial flash for bitmap resources. Compared to MCU-only solutions, the 160-BQFP package and external memory bus enable larger framebuffer and font storage without re-flashing. Choose the MCF5206CAB16A when migrating from 8/16-bit HMI designs that need 32-bit throughput with minimal firmware rewrite.
おすすめ
Networked Sensor Hubs and Edge Nodes
For networked sensor hubs and edge nodes, the MCF5206CAB16A's CAN 2.0B, UART, I2C and USB device interfaces let it aggregate sensor traffic from multiple field-bus segments and present pre-processed data over Ethernet via an external MAC/PHY. The ColdFire V2 core's deterministic execution at 16 MHz supports fixed-cycle sensor sampling without jitter, while the DMA engine offloads bulk data movement. The ROMless architecture lets designers use encrypted external boot flash for secure provisioning of edge nodes. Pin-compatible upgrade to the 40 MHz MCF5206ECAB40 enables higher sample rates on the same PCB when the firmware is rebuilt for the faster timing.
おすすめ
Point-of-Sale and Retail Terminals
The MCF5206CAB16A's USB device controller, multiple UARTs and integrated DMA make it a host processor for point-of-sale terminals driving barcode scanners, receipt printers, magnetic-stripe readers and customer displays. The 160-BQFP package accommodates the bus multiplexing required for parallel LCDs, keypads and external SRAM buffers at 16 MHz. The ColdFire V2 architecture supports POS terminal firmware with deterministic transaction-handling latency, and the ROMless configuration simplifies PCI-style secure boot from external NOR. Choose the MCF5206CAB16A when maintaining legacy ColdFire firmware; consider the MCF5223x family for new POS designs needing more peripherals.
おすすめ
Medical Instrument Front-Ends
In medical instrument front-ends, the MCF5206CAB16A's deterministic ColdFire V2 core, low-latency interrupt controller and serial peripherals make it a host for data acquisition front-ends interfacing with precision ADCs and sensors. The 3.3 V core and 5 V tolerant I/O simplify interfacing with analog front-ends and opto-isolated signal conditioning. The 160-BQFP package supports multilayer boards with split analog/digital ground planes required for medical EMC compliance. Compared to higher-speed MPUs, the 16 MHz operation generates less EMI on sensitive analog front-ends. Choose the MCF5206CAB16A when preserving validated IEC 60601 firmware; otherwise migrate to MCF5223x for new medical designs.
おすすめ
Legacy Equipment Upgrades and Replacements
The MCF5206CAB16A is the natural replacement target for legacy equipment originally built around the 16 MHz MCF5206 silicon. Its identical pinout to the rest of the MCF5206 BQFP-160 family means existing boards can be refreshed without PCB rework. The ColdFire V2 instruction set is backward-compatible with prior MCF5200 designs, allowing firmware binaries to run unchanged when compiled for the same memory map. NXP's NRND status means designers should plan migration to MCF5223x or MCF51CN for new designs, but for one-for-one board repairs the MCF5206CAB16A remains the lowest-risk drop-in. Use the MCF5206ECAB40 for in-field speed upgrades that accept firmware revalidation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCF5206CAB16A — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCF5206ECAB40 | MCF5206CFT16A |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 160-BQFP (28x28 mm) | 160-BQFP (28x28 mm) | 160-BQFP / CQFP ceramic |
| Maximum Core Clock | 16 MHz | 40 MHz | 16 MHz |
| Core Architecture | ColdFire V2 | ColdFire V2 | ColdFire V2 |
| Data Bus Width | 32-bit | 32-bit | 32-bit |
| Program Memory | ROMless (external boot) | ROMless (external boot) | ROMless (external boot) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Pin-Compatible | Yes (reference) | Yes (same BQFP-160) | Yes (same BQFP-160) |
| Lifecycle Status | NRND | NRND | NRND |
主な差別化要因
- ColdFire V2 32-bit MPU with rich on-chip peripheral set in a single 160-BQFP package （vs MCF52233CAF60)
- 16 MHz speed grade preserves proven 16 MHz firmware timing （vs MCF5206ECAB40)
- Freescale and NXP labels are functionally identical silicon （vs Freescale-branded equivalent)
設計ノート
Place a 100 nF ceramic decoupling capacitor as close as possible to each VDD/VSS pin pair of the MCF5206CAB16A, supplemented by a single 10 uF bulk tantalum or ceramic capacitor near the package. The ColdFire V2 core draws approximately 60 to 120 mA typical at 16 MHz depending on peripheral activity. A continuous 3.3 V plane tied to a star-grounded analog/digital split reduces switching noise on the external memory bus. Avoid routing high-speed signals across the package's power-plane gap.
Route the external address and data bus with matched lengths and 33 ohm series termination when the bus length exceeds 50 mm to preserve signal integrity at 16 MHz. The 160-BQFP 0.65 mm pitch allows traces to escape on inner layers with via-in-pad only if the assembly process supports micro-vias; otherwise use dog-bone fan-outs. Maintain a continuous ground plane under the BQFP footprint to provide a reference for the bus and to suppress EMI. Keep clock traces short and guard them with ground on both sides.
Do not assume any ColdFire V2 family member is drop-in compatible - the MCF5206CAB16A shares its 160-BQFP pinout only with other 160-BQFP variants such as MCF5206ECAB40 and MCF5206CFT16A, NOT with the 100-LQFP MCF52233CAF60. Also note that firmware compiled for 16 MHz timing loops may malfunction if the part is replaced with the 40 MHz MCF5206ECAB40 without recompilation. Verify boot-mode configuration pins (BM[1:0]) are correctly pulled for the chosen boot source (external NOR flash, serial flash via QSPI, or BDM-only) before first power-up.
Because the MCF5206CAB16A is ROMless, the external boot memory and SDRAM should be placed within 50 mm of the address/data bus pins to keep stub lengths short. Use a separate chip-select for boot flash and SDRAM and route chip-select traces with the same length-matching discipline as the address bus. Keep the BDM (Background Debug Mode) header accessible on the PCB for in-circuit firmware development and field firmware upgrades via single-wire debug. Avoid placing noisy switch-mode power converters within 30 mm of the bus to minimise coupling onto the address/data lines.
コンプライアンス情報
RoHS / REACH / lead-free / halogen-free status could not be confirmed from the verified web data; check the NXP product page or distributor environmental disclosures. AEC-Q100 is not applicable because the part is a microprocessor for industrial control rather than an automotive-qualified IC. Conflict-minerals declaration status not in verified data.
