MCIMX508CVK8BR2 - i.MX50 800MHz ARM Cortex-A8 SoC | NXP
部品番号: MCIMX508CVK8BR2 ✓ 生産中MCIMX508CVK8BR2 概要
An application processor (AP) is a high-integration SoC designed for embedded systems that consolidates a CPU, memory interfaces, display controllers, and a rich set of connectivity peripherals into a single package. The i.MX50 is positioned above general-purpose microcontrollers and below full multimedia applications processors in NXP's portfolio, targeting power-efficient human-machine interface (HMI) and reading applications such as e-readers, smart label printers, and industrial panels where the EPD controller is the primary differentiator.
Key features include the dedicated E Ink hardware accelerator, 128 KB of on-chip SRAM, 192 general-purpose I/Os, an internal oscillator for clock generation, and a temperature grade suitable for commercial environments. The integrated EPD controller offloads waveform calculation and panel driving from the Cortex-A8 core, freeing CPU bandwidth for the user application and the OS.
The i.MX50 architecture pairs the ARM Cortex-A8 with an L1 cache subsystem and a multi-layer bus matrix. E Ink-certified hardware control removes the need for a separate display driver IC, reducing the bill of materials and enabling thinner e-reader designs at long battery life. The 0.06 micrometer process node helps minimize active and idle power consumption, both critical for e-reader use cases measured in weeks of standby.
Typical applications include dedicated e-readers with E Ink Pearl displays, electronic shelf labels (ESL), e-notebooks, and industrial signage where bi-stable reflective display technology is preferred over emissive LCD. The hardware EPD accelerator and 192 I/O count make it well suited to feature-rich variants with touch controllers, front-light drivers, and Wi-Fi companion chips.
When designing with the MCIMX508CVK8BR2, plan the PCB layout around the 0.5 mm pitch 416-ball MAPBGA with at least 4 routing layers and laser-via-compatible breakout. Validate the boot configuration, DDR routing, and EPD panel connector impedance early, as the E Ink certification is panel-specific. Use NXP's BSP and Linux kernel images for software bring-up.
This page synthesizes verified distributor pricing, same-package drop-in alternatives, and design notes from the official datasheet not always present on distributor catalog pages.
ドロップイン代替品: MCIMX508CVK8BR2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCIMX508CVK8BR2 （同一形状・フットプリント） — 相違点: Mounting Type, Package, Manufacturer.
MCIMX507CVK8B
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCIMX508CVK8B
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX508CVM8B
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX508CVK8BR2 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors |
| Product Family | i.MX50 |
| Core Architecture | ARM Cortex-A8 |
| Number of Cores | 1 |
| データバス幅 | 32-bit |
| Maximum CPU Clock | 800 MHz |
| On-Chip SRAM | 128 KB |
| Number of I/Os | 192 |
| パッケージ | 416-MAPBGA (13x13 mm, 0.5 mm pitch) |
| Case | 416-LFBGA (MAPBGA, plastic) |
| 実装タイプ | Surface Mount |
| Oscillator Type | Internal |
| Packaging | Tape & Reel (TR) |
| Process Node | 0.06 micrometer |
| Integrated Display Controller | E Ink EPD (Pearl-certified) |
| Temperature Grade | Commercial |
| RoHS ステータス | Compliant |
MCIMX508CVK8BR2 416-lfbga (mapbga, plastic) ピン配置ガイド
MCIMX508CVK8BR2 (416-lfbga (mapbga, plastic) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCIMX508CVK8BR2.
詳細は データシート をご参照ください。
主な用途
MCIMX508CVK8BR2 の用途: 7 件s: E-Reader with E Ink Pearl Display, Electronic Shelf Label (ESL) Systems, Industrial E-Paper Signage, Smart E-Notebook and Pen Tablets, E-Paper Based Healthcare Devices, E-Ink Picture Frame, Bus Stop and Transit E-Paper Signage.
E-Reader with E Ink Pearl Display
The MCIMX508CVK8BR2 is purpose-built for e-readers using E Ink's Pearl electronic paper. The integrated EPD controller certified for Pearl panels drives waveform calculation directly in hardware, freeing the 800 MHz Cortex-A8 for OS and UI work. With 128 KB of on-chip SRAM, the SoC handles E Ink waveform buffers without external memory pressure, while the 0.06 micrometer process keeps active power low - essential for e-reader battery life measured in weeks.
おすすめ
Electronic Shelf Label (ESL) Systems
Retail electronic shelf labels benefit from the MCIMX508CVK8BR2's low power profile and integrated EPD controller. The 192 GPIO count supports multi-bus interfaces to RF receivers for wireless ESL gateway updates. The 32-bit ARM Cortex-A8 handles price-update protocols and tamper logging while the E Ink hardware engine drives bi-stable reflective displays without CPU intervention. Commercial temperature grade suits indoor retail environments.
おすすめ
Industrial E-Paper Signage
Industrial signage using E Ink panels, including factory floor information boards and warehouse pick-location displays, can leverage the MCIMX508CVK8BR2's EPD controller and rich I/O set. The internal oscillator and 800 MHz Cortex-A8 support standalone operation with deterministic response times. The 416-MAPBGA package's commercial temperature grade and 192 GPIO count allow integration of sensor inputs (temperature, humidity) for warehouse monitoring.
おすすめ
Smart E-Notebook and Pen Tablets
The MCIMX508CVK8BR2 fits smart e-notebooks that combine a Pearl e-paper panel with a digitizer for pen input. The 800 MHz ARM Cortex-A8 processes handwriting recognition in real time while the EPD controller renders the digital ink on panel. With 128 KB SRAM for gesture/ink-stroke buffers and 192 GPIO for touch and front-light subsystems, the SoC supports mid-tier notebook designs without an additional microcontroller.
おすすめ
E-Paper Based Healthcare Devices
Healthcare equipment such as patient information tablets and bedside e-paper displays benefit from the MCIMX508CVK8BR2's low power consumption and certified E Ink panel support. The integrated EPD controller delivers crisp, low-glare readouts that improve patient comfort over emissive LCDs in clinical environments. Internal SRAM supports on-device encryption of patient ID data, while 192 GPIO supports barcode-scanner and RFID reader integration.
おすすめ
E-Ink Picture Frame
E-ink digital photo frames capitalize on the MCIMX508CVK8BR2's E Ink Pearl panel certification and 800 MHz processing for image-format decoding without a discrete image processor. The 128 KB on-chip SRAM holds an image decode pipeline buffer, and the 192 I/O supports SD card, Wi-Fi, and front-light interfaces. The 0.06 micrometer process enables 'always-on' display with weeks of unplugged use.
おすすめ
Bus Stop and Transit E-Paper Signage
Outdoor transit signage using solar or battery power uses the MCIMX508CVK8BR2 for its low power and certified E Ink panel driving. The integrated EPD controller renders schedule updates over cellular or RF links using only the 32-bit Cortex-A8 for protocol handling, with 192 GPIO available for solar-charge controller integration. Commercial temperature grade suits most outdoor signage enclosures with appropriate thermal design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCIMX508CVK8BR2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCIMX507CVK8B | MCIMX508CVK8B | MCIMX508CVM8B |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 416-MAPBGA (13x13 mm, 0.5 mm pitch) | 416-MAPBGA (13x13 mm) - same | 416-MAPBGA (13x13 mm) - same | 416-MAPBGA (13x13 mm) - same |
| Maximum CPU Clock | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Core Architecture | ARM Cortex-A8 (32-bit, single core) | ARM Cortex-A8 (32-bit, single core) | ARM Cortex-A8 (32-bit, single core) | ARM Cortex-A8 (32-bit, single core) |
| On-Chip SRAM | 128 KB (128K x 8) | 128 KB | 128 KB | 128 KB |
| Number of I/Os | 192 | 192 | 192 | 192 |
| E Ink EPD Controller | Integrated, Pearl-certified | Integrated, basic E Ink | Integrated, Pearl-certified (no TR) | Integrated, Pearl-certified |
| Packaging Form | Tape & Reel (TR) | Tray | Tray | Tape & Reel |
| Process Node | 0.06 micrometer | 0.06 micrometer | 0.06 micrometer | 0.06 micrometer |
主な差別化要因
- Pearl-certified E Ink EPD controller integrated （vs MCIMX507CVK8B)
- Tape & Reel (TR) packaging for high-volume SMT （vs MCIMX508CVK8B)
- Extended 13 mm x 13 mm body for thermal headroom （vs MCIMX508CVM8B)
設計ノート
Estimated: The 416-ball MAPBGA at 0.5 mm pitch in a 13 mm x 13 mm body requires a PCB stackup with microvia or laser-drill technology and at least 4 routing layers. Escape routing density is approximately 1 line per ball at 0.5 mm pitch, so 2 layers dedicated to BGA breakout plus 2 layers for system routing is the practical floor.
The commercial temperature grade of MCIMX508CVK8BR2 supports 0 C to +70 C ambient operation. At 800 MHz CPU load in typical e-reader use, the 416-MAPBGA's exposed die thermal resistance works against the package's plastic-body profile; design with bottom-side thermal vias arrayed on a 1 mm grid under the BGA, stitched to a continuous ground plane. Without thermal vias, junction-to-ambient will not support sustained 800 MHz operation in enclosed e-reader housings.
Do not confuse the VK8B package suffix (13 mm body) with the VM8B suffix (smaller 8 mm body); they require different PCB land patterns and ball-to-pad alignment. Verify boot-mode configuration straps, DDR timing, and E Ink panel parameters against the NXP reference manual before committing to the 13 mm layout. Always validate E Ink certification status with the panel vendor because E Ink's Pearl generation has firmware-version dependencies on the EPD controller engine.
コンプライアンス情報
RoHS compliant per NXP product page. Commercial temperature grade; AEC-Q100 not applicable for e-reader SoC. Halogen-free status to be confirmed via NXP material declaration (PDF size 1379 KB, published 2012-04-02 per verified datasheet record).
