Microchip Technology

MCP3426A0-E/MS - 16-Bit Dual-Channel ADC | Microchip Technology

部品番号: MCP3426A0-E/MS ✓ 生産中
2.048 V Vdss 8-pin MSOP Package
MOQ: 1 |

MCP3426A0-E/MS 概要

The Microchip Technology MCP3426A0-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an 8-pin MSOP package. It supports conversion rates up to 15 samples per second and includes an onboard 2.048 V precision reference, enabling a differential input range of ±2.048 V. The device operates across the -40°C to +125°C temperature range.

A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to achieve high resolution from low-noise sensor signals. It belongs to the data-converter IC hierarchy alongside SAR and pipelined converters. Compared with a successive-approximation-register ADC, the MCP3426 architecture is especially useful when low-noise measurement, averaging, and limited conversion speed are more important than rapid transient capture.

The MCP3426 provides two differential input channels, 16-bit resolution, and conversion rates up to 15 SPS. Its integrated 2.048 V reference reduces external reference circuitry and supports a stated differential range of ±2.048 V. The I2C interface supports digital communication with a microcontroller, embedded controller, or data-acquisition system, while the 8-pin MSOP package supports compact surface-mount designs.

The conversion speed of 15 SPS makes this converter appropriate for slowly changing measurements rather than high-frequency waveform sampling. Its delta-sigma filtering can suppress out-of-band noise, but the analog inputs must still be conditioned to prevent overload, settling errors, or common-mode voltage from exceeding the device limits. Differential operation helps reject common-mode interference when the source is arranged around a biased midpoint.

Typical uses include battery-cell monitoring, pressure and temperature measurement, industrial process instrumentation, environmental sensors, portable instrumentation, and low-rate data acquisition. Differential inputs are particularly useful for bridge sensors and current-sense systems where signal polarity may change around zero and rejecting common-mode noise improves measurement integrity.

Careful layout is essential for precision conversion. Keep analog input traces short, connect the reference and ground pins according to the manufacturer pin-description and layout guidance, and place input filtering capacitors close to their associated pins. Confirm the external I2C pull-up values and the programmed gain, conversion rate, and I2C address before production release.

This product summary combines the manufacturer's device description, distributor package and feature data, pin-compatible family options, and practical design guidance. It also distinguishes confirmed operating facts from parameters that require engineering review against the full manufacturer datasheet.

ドロップイン代替品: MCP3426A0-E/MS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MCP3426A0-E/MS (同一形状・フットプリント) — 相違点: Differential Input Range, Input Channels, Package, Input Configuration.

Microchip Technology
Differential Input Range: ±2.048 V differential
Input Channels: 2 differential inputs
Input Configuration: Two differential analog input channels
Microchip Technology
Package: 8-MSOP
Input Configuration: Differential

MCP3426A0T-E/MS

✅ ドロップイン
📦 8-pin MSOP
Same 8-pin MSOP footprint and 16-bit dual-channel delta-sigma architecture; T indicates a different family variant whose acquisition timing and oscillator details require datasheet confirmation

📋 参考代替品(カタログ未掲載)

MCP3426A1-E/MS

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 8-pin MSOP
16 bit · 2 differential inputs · Delta-sigma sigma-delta ADC · 15 SPS · 2.7 V to 5.5 V · 2.048 V · ±2.048 V differential · 8-pin MSOP

価格はお問い合わせください

データシートを見る →

MCP3426A2-E/MS

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 8-pin MSOP
Sigma-delta ADC · 16 bit · 2 channels · Differential · 15 samples per second · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

価格はお問い合わせください

データシートを見る →

MCP3426A3-E/MS

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin MSOP
Same MCP3426 16-bit dual-channel MSOP construction; factory-programmed I2C address differs from the A0 variant, changing bus address by three address steps

📋 参考代替品(カタログ未掲載)

MCP3426A0-E/MC

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 8-pin MSOP
16 bit · 2 channels · Differential · Delta-sigma · 15 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

価格はお問い合わせください

データシートを見る →

MCP3426A0-E/MS 最大定格&電気的特性

分解能 16 bit
Input Channels 2 channels
Input Architecture 2 differential inputs
ADC Architecture 1-channel sigma-delta conversion per differential input
Maximum Conversion Rate 15 SPS
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface I2C
動作温度範囲 -40°C to +125°C
パッケージ 8-pin MSOP
Terminal Count 8 pins
実装タイプ Surface mount
Package Form Gull-wing MSOP
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification unknown

MCP3426A0-E/MS gull-wing msop ピン配置ガイド

MCP3426A0-E/MS (gull-wing msop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

MCP3426A0-E/MS の gull-wing msop パッケージピン配置図

詳細なピン配置データはありません: MCP3426A0-E/MS.

詳細は データシート をご参照ください。

主な用途

MCP3426A0-E/MS の用途: 6 件s: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Environmental Monitoring, Precision Current Measurement, Low-Rate Data Acquisition, Portable Measurement Instruments.

⚡

Battery Cell Monitoring

The MCP3426A0-E/MS suits battery-cell monitoring because it combines 16-bit resolution, two differential channels, and conversion rates up to 15 SPS with an operating range of -40°C to +125°C. Place the converter between a protected cell-divider network and an energy-storage controller, then use differential inputs to reject voltage shared by both measurement nodes. The 2.048 V onboard reference defines a stated ±2.048 V differential measurement range, allowing a bridge or divider to be scaled into that window. Because the maximum rate is 15 SPS, this device is intended for changing cell voltages and temperatures rather than fast switching transients. Validate input protection, common-mode limits, reference accuracy, and divider tolerance before enabling the measurement path in a high-energy system.

🏭

Industrial Pressure Sensing

The MCP3426A0-E/MS is appropriate for slow industrial pressure signals that require more resolution than a coarse system ADC while still supporting low-rate acquisition. Its two differential inputs can monitor a pressure bridge and a temperature or calibration channel, with each analog node driven from the same excitation source for better common-mode rejection. A 15 SPS maximum rate is suitable for process monitoring, panel instruments, and test equipment where the measured pressure changes gradually. The onboard 2.048 V reference provides a defined endpoint for the ±2.048 V differential range. The practical design should include bridge excitation, input overvoltage protection, anti-alias filtering, and a mechanical layout that avoids routing motor or relay-control currents near the high-impedance sensor nodes.

🧩

Temperature and Environmental Monitoring

The MCP3426A0-E/MS can digitize thermistors, RTDs, or other slowly varying environmental sensors when the signal is conditioned into its differential input range. Two channels allow a controller to monitor a process temperature and an ambient reference, or to implement temperature compensation in a second sensor. The 15 SPS maximum rate supports periodic control-loop updates without the overhead and noise of a much faster converter. Differential input architecture helps reduce common-mode pickup when long sensor cables are used, but cable length still calls for input filtering and protection. Use a stable excitation strategy, check the configured gain against the available common-mode headroom, and calibrate the system across the intended temperature range for accurate results.

⚡

Precision Current Measurement

The MCP3426A0-E/MS can serve as the measurement ADC in a precision shunt-monitoring circuit when current is deliberately slowed or averaged for thermal reasons. Its differential inputs accept positive and negative signal polarities around a biased midpoint, making the converter suitable for bidirectional current sensing. The 2.048 V reference and 16-bit nominal resolution support careful shunt scaling, while the 15 SPS ceiling favors power, battery, and actuator current monitoring rather than protection loops. Place the shunt amplifier or differential front end close enough to avoid adding pickup after the signal has been amplified. The complete signal chain must establish the correct common-mode bias, limit transient energy during switching, and ensure that the selected gain and filter bandwidth do not overload the ADC during peak current.

🖥️

Low-Rate Data Acquisition

The MCP3426A0-E/MS is useful in compact, low-rate data-acquisition modules where two slowly changing analog signals must be transferred through I2C. Its 16-bit resolution, dual-channel differential architecture, and conversion rate up to 15 SPS provide useful measurement density without requiring several separate converters. A host controller can issue configuration commands, select acquisition settings, and read each conversion through the serial interface. The device is best suited to process variables, laboratory channels, and equipment monitoring rather than waveform capture. When designing the module, account for input settling between configuration changes and samples, specify external anti-alias filters according to the selected conversion rate, and isolate analog and digital return currents to preserve measurement repeatability.

📱

Portable Measurement Instruments

The MCP3426A0-E/MS fits portable instruments that prioritize low-noise resolution, compactness, and simple serial connectivity. Its 8-pin MSOP package limits board area, while two differential channels can support a measurement sensor plus an internal reference or temperature channel. The 15 SPS maximum rate is adequate for handheld meters displaying slow physical variables and can be adjusted to balance conversion time, filtering, and power consumption. A portable product should use the I2C bus for compact wiring, include pull-up resistors appropriate to bus voltage and capacitance, and protect analog inputs when probe leads are exposed to user-accessible voltages. Battery operation also requires verifying the converter's supply-current behavior and whether its internal reference remains accurate across the product's battery and temperature range.

おすすめ製品の概要

MCP3426 Base two-channel differential delta-sigma ADC family 使用用途: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Environmental Monitoring, Precision Current Measurement, Low-Rate Data Acquisition, Portable Measurement Instruments MCP3426A0-E/MS Microchip Technology 使用用途: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Environmental Monitoring, Precision Current Measurement, Low-Rate Data Acquisition, Portable Measurement Instruments
What is the MCP3426A0-E/MS?
The MCP3426A0-E/MS is a Microchip Technology 16-bit, dual-channel, delta-sigma ADC with differential inputs, an I2C interface, and an 8-pin MSOP package. According to the manufacturer product page, it provides up to 16-bit resolution, includes a precision 2.048 V onboard reference, and supports conversion rates up to 15 SPS. It is intended for low-noise, relatively slow analog measurements rather than high-frequency waveform acquisition.
What is the resolution and conversion rate of MCP3426A0-E/MS?
The MCP3426A0-E/MS provides 16-bit resolution and a maximum conversion rate of 15 samples per second. The manufacturer describes the MCP3426 as a two-channel, low-noise, high-accuracy delta-sigma converter with differential inputs. Its digital filtering and oversampling characteristics make it most suitable for temperature, pressure, battery, and process-control signals that change slowly enough for the selected conversion mode.
What voltage range can MCP3426A0-E/MS measure?
The MCP3426A0-E/MS supports a differential input range of ±2.048 V when its onboard precision 2.048 V reference is used. The manufacturer's product description explicitly identifies this differential range. Common-mode voltage, gain configuration, and the device's absolute maximum ratings should still be checked against the full datasheet before applying an input to the converter.
Where can I download the MCP3426A0-E/MS datasheet PDF?
The official MCP3426 documentation is available through the Microchip Technology MCP3426 product page linked on this product page. A separate distributor-hosted datasheet entry is also available for MCP3426A0-E/MS. Use the manufacturer document for pin descriptions, electrical characteristics, timing, application circuits, and package drawings, and verify its revision before releasing a production design.
Where is the MCP3426A0-E/MS pinout?
The MCP3426A0-E/MS uses an 8-pin MSOP package, and its numbered pin descriptions are located in the pinout and connection diagrams in the manufacturer datasheet. Assign PCB tracks from that diagram rather than inferring pin functions from the I2C or analog-circuit context. Pay particular attention to analog input, ground, reference, supply, and clock-related connections before layout release.
Can MCP3426A0-E/MS measure bridge sensors and bipolar signals?
Yes, the MCP3426A0-E/MS has differential inputs and can measure bipolar signals within its ±2.048 V differential range when configured with the onboard 2.048 V reference. Differential measurement is useful for ratiometric bridge sensors because it rejects common-mode voltage and allows zero to appear at the midpoint of the converter input range. Input filtering, excitation settling, and overvoltage protection must be designed around the selected gain and sample rate.
What can replace MCP3426A0-E/MS without changing the PCB?
MCP3426A0T-E/MS is the closest identified same-family candidate for a board-level review because it is associated with the MCP3426A0 family and the same 8-pin MSOP format. Before replacing the device, confirm pin compatibility, I2C address, oscillator behavior, acquisition timing, and any changes in conversion performance. The Request a Quote form on this page can be used to ask about these same-footprint replacement options.
Is MCP3426A0-E/MS the same as MCP3426A0T-E/MS?
No. MCP3426A0-E/MS and MCP3426A0T-E/MS belong to the same MCP3426A0 family, but they are not identical orderable devices. The T designation identifies a different device variant, so engineers must compare the datasheet timing, oscillator, I2C behavior, and electrical characteristics before treating it as a drop-in replacement. Both use the 8-pin MSOP family package, but package similarity alone does not guarantee functional equivalence.
When should I choose MCP3426A0-E/MS instead of a faster ADC?
Choose the MCP3426A0-E/MS when the measurement changes slowly, high nominal resolution matters, and an I2C-connected 16-bit converter is sufficient. Its maximum 15 SPS rate is substantially below the throughput of many SAR ADCs, so it is inappropriate for high-frequency signal capture, motor-control feedback, or waveform sampling. It is better suited to sensors such as thermistors, pressure cells, and slowly varying electrochemical measurements.
Is MCP3426A0-E/MS suitable for battery monitoring?
Yes, the MCP3426A0-E/MS is suitable for low-rate battery-cell monitoring because it offers 16-bit resolution, differential inputs, a 15 SPS maximum conversion rate, and a stated operating range of -40°C to +125°C. Differential ratiometric measurement can improve accuracy when the reference and excitation share supply variations. The input network must still accommodate the cell's common-mode voltage, transient conditions, and maximum measurement range.
What is the best Microchip equivalent for MCP3426A0-E/MS?
MCP3426A0T-E/MS is the best same-brand candidate identified for an engineering drop-in assessment, while the MCP3426A1, MCP3426A2, and MCP3426A3 family members may provide alternative factory-programmed I2C addresses. These parts must be checked for identical pin functions and acquisition behavior. The Request a Quote form on this page can be used to ask which exact variant can be sourced for the intended board configuration.
Where can I buy MCP3426A0-E/MS and check its lead time?
Use the Request a Quote form on this page to ask about MCP3426A0-E/MS availability, authorized-channel lead time, minimum order quantity, and shipment options. The current commercial status should be confirmed during quotation because stock and lead time can change without notice. The exact order code MCP3426A0-E/MS should be included in the request to avoid ambiguity with other MCP3426 package or I2C-address variants.
What is the current price of MCP3426A0-E/MS?
The current commercial price is presented through the Request a Quote form on this page rather than as a static price statement. Submit the exact MPN MCP3426A0-E/MS and requested quantity to obtain a current quotation, along with any applicable minimum-order and lead-time information. Package suffix, I2C address variant, and shipment quantity can materially affect sourcing conditions.
Is MCP3426A0-E/MS currently in stock?
Current stock for MCP3426A0-E/MS should be confirmed through the Request a Quote form on this page. Inventory status can vary by package suffix, regional warehouse, and production lot, so a generic listing should not be treated as a guaranteed allocation. Include your required quantity and assembly schedule when requesting the quotation.
What key specifications of MCP3426A0-E/MS should engineers know?
The essential MCP3426A0-E/MS specifications are 16-bit resolution, two differential input channels, a maximum conversion rate of 15 SPS, a 2.048 V onboard reference, an I2C interface, and an 8-pin MSOP package. According to the manufacturer product page, the operating temperature range is -40°C to +125°C. Supply limits, gain settings, noise, timing, and absolute maximum ratings should be taken from the manufacturer datasheet.

エンジニアリング参考データ: MCP3426A0-E/MS — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MCP3426A0-E/MS for a low-rate, precision measurement design that needs two differential channels, nominal 16-bit resolution, an integrated 2.048 V reference, and an 8-pin MSOP footprint. It is strongest for temperature, pressure, battery, current, and environmental sensing where the measured signal changes slowly and the maximum 15 SPS conversion rate is acceptable. Consider MCP3426A0T-E/MS when its specific acquisition or timing characteristics satisfy the application, but verify the functional difference before substituting it. Use MCP3426A1, MCP3426A2, or MCP3426A3 when their factory-programmed I2C addresses solve a bus-address conflict and the remaining electrical specifications are equivalent. The MCP3426A0-E/MC option serves ordering or delivery-format requirements without changing the conversion function. For waveform capture, sampling control loops, or signals requiring substantially more than 15 conversions per second, select a faster ADC architecture rather than forcing this converter beyond its intended operating range.

代替品との比較

パラメータ この製品 MCP3426A0T-E/MS MCP3426A1-E/MS MCP3426A2-E/MS MCP3426A3-E/MS MCP3426A0-E/MC
Package 8-pin MSOP 8-pin MSOP 8-pin MSOP 8-pin MSOP 8-pin MSOP 8-pin MSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Input Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Conversion Architecture Delta-sigma with differential inputs Delta-sigma with differential inputs Delta-sigma with differential inputs Delta-sigma with differential inputs Delta-sigma with differential inputs Delta-sigma with differential inputs
Maximum Conversion Rate 15 SPS 15 SPS 15 SPS 15 SPS 15 SPS 15 SPS
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Digital Interface I2C I2C I2C with alternate factory address I2C with alternate factory address I2C with alternate factory address I2C
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C

主な差別化要因

  • Two-channel differential measurement in a compact 8-pin MSOP (vs MCP3426A0-E/MC)
  • Integrated reference establishes a defined measurement range (vs MCP3426A1-E/MS)
  • Address variants support multi-converter I2C bus planning (vs MCP3426A0-E/MS)

設計ノート

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The operating temperature range of -40°C to +125°C does not by itself establish AEC-Q100 qualification. Compliance declarations are not stated in the cited product and distributor records and must be confirmed for the exact orderable MPN.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MCP3426A0-E/MS datasheet MCP3426A0-E/MS pinout MCP3426A0-E/MS datasheet pdf MCP3426A0-E/MS equivalent MCP3426A0-E/MS replacement MCP3426A0-E/MS price MCP3426A0-E/MS stock Microchip MCP3426A0-E/MS MCP3426A0-E/MS vs MCP3426A0T-E/MS MCP3426 8-pin MSOP ADC MCP3426A0-E/MS application circuit MCP3426A0-E/MS cross reference

関連部品&用語

Microchip Technology MCP3426A0-E/MS MCP3426 MCP3426A0T-E/MS MCP3426A1-E/MS MCP3426A2-E/MS MCP3426A3-E/MS MCP3426A0-E/MC ADC analog-to-digital converter delta-sigma ADC data-converter IC semiconductor 16-bit resolution differential input I2C precision reference 2.048 V reference 15 SPS MSOP 8-pin MSOP surface mount SMD battery monitoring industrial sensor interface
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示