MCP3426A0-E/MS - 16-Bit Dual-Channel ADC | Microchip Technology
MPN: MCP3426A0-E/MS ✓ فعالMCP3426A0-E/MS جائزہ
A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to achieve high resolution from low-noise sensor signals. It belongs to the data-converter IC hierarchy alongside SAR and pipelined converters. Compared with a successive-approximation-register ADC, the MCP3426 architecture is especially useful when low-noise measurement, averaging, and limited conversion speed are more important than rapid transient capture.
The MCP3426 provides two differential input channels, 16-bit resolution, and conversion rates up to 15 SPS. Its integrated 2.048 V reference reduces external reference circuitry and supports a stated differential range of ±2.048 V. The I2C interface supports digital communication with a microcontroller, embedded controller, or data-acquisition system, while the 8-pin MSOP package supports compact surface-mount designs.
The conversion speed of 15 SPS makes this converter appropriate for slowly changing measurements rather than high-frequency waveform sampling. Its delta-sigma filtering can suppress out-of-band noise, but the analog inputs must still be conditioned to prevent overload, settling errors, or common-mode voltage from exceeding the device limits. Differential operation helps reject common-mode interference when the source is arranged around a biased midpoint.
Typical uses include battery-cell monitoring, pressure and temperature measurement, industrial process instrumentation, environmental sensors, portable instrumentation, and low-rate data acquisition. Differential inputs are particularly useful for bridge sensors and current-sense systems where signal polarity may change around zero and rejecting common-mode noise improves measurement integrity.
Careful layout is essential for precision conversion. Keep analog input traces short, connect the reference and ground pins according to the manufacturer pin-description and layout guidance, and place input filtering capacitors close to their associated pins. Confirm the external I2C pull-up values and the programmed gain, conversion rate, and I2C address before production release.
This product summary combines the manufacturer's device description, distributor package and feature data, pin-compatible family options, and practical design guidance. It also distinguishes confirmed operating facts from parameters that require engineering review against the full manufacturer datasheet.
کے لیے ڈراپ اِن متبادل MCP3426A0-E/MS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MCP3426A0-E/MS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Differential Input Range, Input Channels, Package, Input Configuration.
MCP3426A0T-E/MS
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP3426A1-E/MS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3426A2-E/MS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3426A3-E/MS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP3426A0-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3426A0-E/MS زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 16 bit |
| Input Channels | 2 channels |
| Input Architecture | 2 differential inputs |
| ADC Architecture | 1-channel sigma-delta conversion per differential input |
| Maximum Conversion Rate | 15 SPS |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | I2C |
| آپریٹنگ درجہ حرارت رینج | -40°C to +125°C |
| پیکیج | 8-pin MSOP |
| Terminal Count | 8 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Package Form | Gull-wing MSOP |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MCP3426A0-E/MS gull-wing msop پن کنفیگریشن گائیڈ
MCP3426A0-E/MS (gull-wing msop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP3426A0-E/MS.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MCP3426A0-E/MS کے لیے موزوں ہے 6 ایپلیکیشنs: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Environmental Monitoring, Precision Current Measurement, Low-Rate Data Acquisition, Portable Measurement Instruments.
Battery Cell Monitoring
The MCP3426A0-E/MS suits battery-cell monitoring because it combines 16-bit resolution, two differential channels, and conversion rates up to 15 SPS with an operating range of -40°C to +125°C. Place the converter between a protected cell-divider network and an energy-storage controller, then use differential inputs to reject voltage shared by both measurement nodes. The 2.048 V onboard reference defines a stated ±2.048 V differential measurement range, allowing a bridge or divider to be scaled into that window. Because the maximum rate is 15 SPS, this device is intended for changing cell voltages and temperatures rather than fast switching transients. Validate input protection, common-mode limits, reference accuracy, and divider tolerance before enabling the measurement path in a high-energy system.
تجویز کردہ
Industrial Pressure Sensing
The MCP3426A0-E/MS is appropriate for slow industrial pressure signals that require more resolution than a coarse system ADC while still supporting low-rate acquisition. Its two differential inputs can monitor a pressure bridge and a temperature or calibration channel, with each analog node driven from the same excitation source for better common-mode rejection. A 15 SPS maximum rate is suitable for process monitoring, panel instruments, and test equipment where the measured pressure changes gradually. The onboard 2.048 V reference provides a defined endpoint for the ±2.048 V differential range. The practical design should include bridge excitation, input overvoltage protection, anti-alias filtering, and a mechanical layout that avoids routing motor or relay-control currents near the high-impedance sensor nodes.
تجویز کردہ
Temperature and Environmental Monitoring
The MCP3426A0-E/MS can digitize thermistors, RTDs, or other slowly varying environmental sensors when the signal is conditioned into its differential input range. Two channels allow a controller to monitor a process temperature and an ambient reference, or to implement temperature compensation in a second sensor. The 15 SPS maximum rate supports periodic control-loop updates without the overhead and noise of a much faster converter. Differential input architecture helps reduce common-mode pickup when long sensor cables are used, but cable length still calls for input filtering and protection. Use a stable excitation strategy, check the configured gain against the available common-mode headroom, and calibrate the system across the intended temperature range for accurate results.
تجویز کردہ
Precision Current Measurement
The MCP3426A0-E/MS can serve as the measurement ADC in a precision shunt-monitoring circuit when current is deliberately slowed or averaged for thermal reasons. Its differential inputs accept positive and negative signal polarities around a biased midpoint, making the converter suitable for bidirectional current sensing. The 2.048 V reference and 16-bit nominal resolution support careful shunt scaling, while the 15 SPS ceiling favors power, battery, and actuator current monitoring rather than protection loops. Place the shunt amplifier or differential front end close enough to avoid adding pickup after the signal has been amplified. The complete signal chain must establish the correct common-mode bias, limit transient energy during switching, and ensure that the selected gain and filter bandwidth do not overload the ADC during peak current.
تجویز کردہ
Low-Rate Data Acquisition
The MCP3426A0-E/MS is useful in compact, low-rate data-acquisition modules where two slowly changing analog signals must be transferred through I2C. Its 16-bit resolution, dual-channel differential architecture, and conversion rate up to 15 SPS provide useful measurement density without requiring several separate converters. A host controller can issue configuration commands, select acquisition settings, and read each conversion through the serial interface. The device is best suited to process variables, laboratory channels, and equipment monitoring rather than waveform capture. When designing the module, account for input settling between configuration changes and samples, specify external anti-alias filters according to the selected conversion rate, and isolate analog and digital return currents to preserve measurement repeatability.
تجویز کردہ
Portable Measurement Instruments
The MCP3426A0-E/MS fits portable instruments that prioritize low-noise resolution, compactness, and simple serial connectivity. Its 8-pin MSOP package limits board area, while two differential channels can support a measurement sensor plus an internal reference or temperature channel. The 15 SPS maximum rate is adequate for handheld meters displaying slow physical variables and can be adjusted to balance conversion time, filtering, and power consumption. A portable product should use the I2C bus for compact wiring, include pull-up resistors appropriate to bus voltage and capacitance, and protect analog inputs when probe leads are exposed to user-accessible voltages. Battery operation also requires verifying the converter's supply-current behavior and whether its internal reference remains accurate across the product's battery and temperature range.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MCP3426A0-E/MS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MCP3426A0T-E/MS | MCP3426A1-E/MS | MCP3426A2-E/MS | MCP3426A3-E/MS | MCP3426A0-E/MC |
|---|---|---|---|---|---|---|
| Package | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Conversion Architecture | Delta-sigma with differential inputs | Delta-sigma with differential inputs | Delta-sigma with differential inputs | Delta-sigma with differential inputs | Delta-sigma with differential inputs | Delta-sigma with differential inputs |
| Maximum Conversion Rate | 15 SPS | 15 SPS | 15 SPS | 15 SPS | 15 SPS | 15 SPS |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Digital Interface | I2C | I2C | I2C with alternate factory address | I2C with alternate factory address | I2C with alternate factory address | I2C |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
اہم امتیازی خصوصیات
- Two-channel differential measurement in a compact 8-pin MSOP (بمقابلہMCP3426A0-E/MC)
- Integrated reference establishes a defined measurement range (بمقابلہMCP3426A1-E/MS)
- Address variants support multi-converter I2C bus planning (بمقابلہMCP3426A0-E/MS)
ڈیزائن نوٹس
تعمیل کی معلومات
The operating temperature range of -40°C to +125°C does not by itself establish AEC-Q100 qualification. Compliance declarations are not stated in the cited product and distributor records and must be confirmed for the exact orderable MPN.