MCP3564RT-E/NC - 24-Bit 153.6kSPS ADC | Microchip
部品番号: MCP3564RT-E/NC ✓ 生産中MCP3564RT-E/NC 概要
A delta-sigma ADC is a category of analog-to-digital converter that uses continuous-time sigma-delta modulation and digital filtering to produce high-resolution conversion results. It belongs to the wider ADC hierarchy, alongside SAR and pipeline converters, and is used when high resolution, low noise, integrated references, and flexible input multiplexing matter more than maximum conversion speed. The MCP3564R family is positioned for precision measurement rather than high-speed waveform capture.
The converter provides 24-bit resolution, four differential or eight single-ended channels, and programmable data rates up to 153.6 kSPS. Digital filtering and programmable gain support precise acquisition of low-level analog signals, while the integrated voltage reference reduces external calibration requirements. The SPI interface provides a straightforward connection to microcontrollers, DSPs, and industrial control systems.
Its 20-UQFN construction supports compact, high-density analog measurement boards while preserving separate analog and digital supply pins for careful partitioning. Programmable input channels, scan capability, and selectable gain make it possible to combine several sensor inputs into one acquisition channel. The manufacturer product page identifies the device as a low-noise 24-bit delta-sigma ADC with integrated features and programmable data rates.
Typical uses include precision sensor interfaces, factory automation, process control, industrial instrumentation, and embedded measurement systems. Four differential inputs can support bridge sensors or differential voltage probes, while eight single-ended inputs suit multiplexed external networks. The SPI-compatible control path simplifies integration with common embedded processors.
PCB design should keep analog input traces short and place filtering or anti-aliasing components near the converter. Use a quiet reference and ground arrangement, separate analog and digital supply paths where practical, and follow the manufacturer’s recommended decoupling layout. Allow for the exposed-pad thermal and electrical requirements of the 20-UQFN package.
This product page combines the MCP3564R family architecture, package information, sourcing guidance, replacement constraints, and application-oriented design considerations. It is intended to help engineers evaluate the MCP3564RT-E/NC for compact, high-resolution measurement systems without overlooking package, interface, or qualification constraints.
ドロップイン代替品: MCP3564RT-E/NC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MCP3564T-E/NC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3564RT-E/NC 最大定格&電気的特性
| Converter Type | 24-bit delta-sigma ADC |
| 分解能 | 24 bit |
| Maximum Data Rate | 153.6 kSPS |
| Differential Input Channels | 4 channels |
| Single-Ended Input Channels | 8 channels |
| インターフェース | SPI |
| Integrated Features | Internal voltage reference |
| 電源電圧 | 3 V |
| 動作温度 | -40 °C to +85 °C |
| パッケージ | 20-UQFN (3 x 3 mm) |
| Exposed Pad | Present |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
MCP3564RT-E/NC 20-uqfn (3 x 3 mm) ピン配置ガイド
MCP3564RT-E/NC (20-uqfn (3 x 3 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3564RT-E/NC.
詳細は データシート をご参照ください。
主な用途
MCP3564RT-E/NC の用途: 6 件s: Precision Sensor Interfaces, Factory Automation and Process Control, Industrial Instrumentation, Bridge and Differential Measurement, Environmental and Energy Monitoring, Embedded Data Acquisition Modules.
Precision Sensor Interfaces
The MCP3564RT-E/NC suits precision sensor acquisition because its 24-bit delta-sigma conversion, four differential inputs, and programmable gain can capture low-level transducer signals without the complexity of a high-speed flash ADC. Connect each bridge or differential probe to an input channel, apply the required analog filtering, and configure the gain and conversion rate before transferring results through SPI. The internal reference simplifies the analog supply arrangement, while the 20-UQFN 3 x 3 mm package preserves board area. Designers should verify input impedance and settling requirements for the selected sensor and output data rate.
おすすめ
Factory Automation and Process Control
The MCP3564RT-E/NC is appropriate for factory automation systems that monitor pressure, temperature, flow, or level signals through multiple analog inputs. Its eight single-ended channels or four differential channels support a mix of grounded and differential transducers, while programmable gain helps normalize signals before conversion. The maximum 153.6 kSPS rate provides more than enough bandwidth for many slow industrial control loops. An SPI host processor can configure the scan and read results, and the compact 20-UQFN package allows the converter to sit close to field-side circuitry.
おすすめ
Industrial Instrumentation
The MCP3564RT-E/NC fits compact industrial instrumentation requiring accurate low-level measurements rather than maximum sampling speed. Its 24-bit resolution and low-noise delta-sigma architecture support panel meters, portable analyzers, and data-acquisition modules with multiple sensor inputs. The internal voltage reference reduces external reference complexity, and SPI provides a common connection to embedded controllers. Engineers should select the digital filter and data rate to balance response time against noise performance, then validate the analog front end for sensor excitation and common-mode range.
おすすめ
Bridge and Differential Measurement
The MCP3564RT-E/NC supports measurement systems using four differential input channels, making it appropriate for resistive bridges, strain-gauge conditioning, and differential voltage probes. The selected gain can amplify small sensor outputs before 24-bit digitization, while programmable digital filtering suppresses noise outside the desired measurement bandwidth. Place input protection and filtering near the converter, maintain a quiet reference and analog supply, and check differential input limits for the excitation scheme. SPI output allows the host controller to apply calibration coefficients and status monitoring.
おすすめ
Environmental and Energy Monitoring
The MCP3564RT-E/NC can support environmental monitoring systems that combine temperature, humidity, pressure, gas, or energy-monitoring outputs into one compact measurement module. Eight single-ended inputs reduce the need for separate converters when the monitored signals share suitable electrical ranges, while the internal reference supports a compact implementation. Choose the data rate and digital filter according to the environmental variable’s response time, and apply gain only where signal levels require it. The 3 V supply and 20-UQFN package are well suited to distributed, space-constrained sensor nodes.
おすすめ
Embedded Data Acquisition Modules
The MCP3564RT-E/NC is suitable for embedded data-acquisition modules that combine several analog measurements with an SPI microcontroller or digital signal processor. Its four differential or eight single-ended channels provide flexible multiplexing, while 24-bit resolution preserves fine detail in slowly changing or small-signal measurements. The 153.6 kSPS maximum rate supports moderate-speed acquisition without forcing the host to manage a fast flash-conversion interface. Designers should budget settling time between channel scans, synchronize software triggers correctly, and follow the exposed-pad layout guidance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3564RT-E/NC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3564T-E/NC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-UQFN (3 x 3 mm) | 20-UQFN (3 x 3 mm) |
| ADC Resolution | 24 bit | 24 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS |
| Differential Input Channels | 4 channels | 4 channels |
| Single-Ended Input Channels | 8 channels | 8 channels |
| Conversion Architecture | Delta-sigma | Delta-sigma |
| Interface | SPI | SPI |
| Internal Reference | Present | Present |
| Order-Code Qualification | MCP3564RT-E/NC | MCP3564T-E/NC; verify temperature, packaging, and assembly conditions |
主な差別化要因
- Combines four differential channels with eight single-ended options (vs MCP3564T-E/NC)
- Maximum programmable conversion rate (vs MCP3564T-E/NC)
- Integrated precision-conversion features (vs MCP3564T-E/NC)
設計ノート
Place the MCP3564RT-E/NC analog input and decoupling connections according to the manufacturer layout guidance, keeping traces short and separating sensitive input routes from SPI clock and data paths. The 20-UQFN package requires close attention to land geometry and exposed-pad connection. A compact analog section reduces susceptibility to board contamination and switching noise, while the internal reference should be decoupled with the prescribed component arrangement.
Choose input filtering, gain, digital-filter settings, and output data rate together. The converter reaches 153.6 kSPS, but maximum speed does not automatically provide maximum resolution or the fastest settled result for every channel. Verify acquisition timing for the selected output rate, allow sufficient conversion and settling intervals during multiplexed scans, and evaluate the analog filter against aliasing requirements before relying on the 24-bit nominal resolution.
The MCP3564RT-E/NC operates from a 3 V supply. Provide stable, low-noise power at the analog and digital supply pins and follow the manufacturer’s capacitor values and placement instructions. Keep switching-regulator and high-current digital paths away from the reference and input network. Because the internal reference is part of the measurement chain, reference stability and supply rejection should be included in the system error budget rather than treated as ideal conditions.
コンプライアンス情報
RoHS-compliant status is stated in the MCP3564RT-E/NC product description. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established.