MCP3564RT-E/NC - 24-Bit 153.6kSPS ADC | Microchip
MPN: MCP3564RT-E/NC ✓ 啟用中MCP3564RT-E/NC 概覽
A delta-sigma ADC is a category of analog-to-digital converter that uses continuous-time sigma-delta modulation and digital filtering to produce high-resolution conversion results. It belongs to the wider ADC hierarchy, alongside SAR and pipeline converters, and is used when high resolution, low noise, integrated references, and flexible input multiplexing matter more than maximum conversion speed. The MCP3564R family is positioned for precision measurement rather than high-speed waveform capture.
The converter provides 24-bit resolution, four differential or eight single-ended channels, and programmable data rates up to 153.6 kSPS. Digital filtering and programmable gain support precise acquisition of low-level analog signals, while the integrated voltage reference reduces external calibration requirements. The SPI interface provides a straightforward connection to microcontrollers, DSPs, and industrial control systems.
Its 20-UQFN construction supports compact, high-density analog measurement boards while preserving separate analog and digital supply pins for careful partitioning. Programmable input channels, scan capability, and selectable gain make it possible to combine several sensor inputs into one acquisition channel. The manufacturer product page identifies the device as a low-noise 24-bit delta-sigma ADC with integrated features and programmable data rates.
Typical uses include precision sensor interfaces, factory automation, process control, industrial instrumentation, and embedded measurement systems. Four differential inputs can support bridge sensors or differential voltage probes, while eight single-ended inputs suit multiplexed external networks. The SPI-compatible control path simplifies integration with common embedded processors.
PCB design should keep analog input traces short and place filtering or anti-aliasing components near the converter. Use a quiet reference and ground arrangement, separate analog and digital supply paths where practical, and follow the manufacturer’s recommended decoupling layout. Allow for the exposed-pad thermal and electrical requirements of the 20-UQFN package.
This product page combines the MCP3564R family architecture, package information, sourcing guidance, replacement constraints, and application-oriented design considerations. It is intended to help engineers evaluate the MCP3564RT-E/NC for compact, high-resolution measurement systems without overlooking package, interface, or qualification constraints.
直接替換替代品,適用於 MCP3564RT-E/NC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MCP3564T-E/NC
✅ 直接替換聯絡詢價
查看資料表 →MCP3564RT-E/NC 最大額定值與電氣特性
| Converter Type | 24-bit delta-sigma ADC |
| 解析度 | 24 bit |
| Maximum Data Rate | 153.6 kSPS |
| Differential Input Channels | 4 channels |
| Single-Ended Input Channels | 8 channels |
| 介面 | SPI |
| Integrated Features | Internal voltage reference |
| 供應電壓 | 3 V |
| 工作溫度 | -40 °C to +85 °C |
| 封裝 | 20-UQFN (3 x 3 mm) |
| Exposed Pad | Present |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
MCP3564RT-E/NC 20-uqfn (3 x 3 mm) 腳位配置指南
MCP3564RT-E/NC(20-uqfn (3 x 3 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3564RT-E/NC.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3564RT-E/NC 適用於 6 應用s: Precision Sensor Interfaces, Factory Automation and Process Control, Industrial Instrumentation, Bridge and Differential Measurement, Environmental and Energy Monitoring, Embedded Data Acquisition Modules.
Precision Sensor Interfaces
The MCP3564RT-E/NC suits precision sensor acquisition because its 24-bit delta-sigma conversion, four differential inputs, and programmable gain can capture low-level transducer signals without the complexity of a high-speed flash ADC. Connect each bridge or differential probe to an input channel, apply the required analog filtering, and configure the gain and conversion rate before transferring results through SPI. The internal reference simplifies the analog supply arrangement, while the 20-UQFN 3 x 3 mm package preserves board area. Designers should verify input impedance and settling requirements for the selected sensor and output data rate.
推薦
Factory Automation and Process Control
The MCP3564RT-E/NC is appropriate for factory automation systems that monitor pressure, temperature, flow, or level signals through multiple analog inputs. Its eight single-ended channels or four differential channels support a mix of grounded and differential transducers, while programmable gain helps normalize signals before conversion. The maximum 153.6 kSPS rate provides more than enough bandwidth for many slow industrial control loops. An SPI host processor can configure the scan and read results, and the compact 20-UQFN package allows the converter to sit close to field-side circuitry.
推薦
Industrial Instrumentation
The MCP3564RT-E/NC fits compact industrial instrumentation requiring accurate low-level measurements rather than maximum sampling speed. Its 24-bit resolution and low-noise delta-sigma architecture support panel meters, portable analyzers, and data-acquisition modules with multiple sensor inputs. The internal voltage reference reduces external reference complexity, and SPI provides a common connection to embedded controllers. Engineers should select the digital filter and data rate to balance response time against noise performance, then validate the analog front end for sensor excitation and common-mode range.
推薦
Bridge and Differential Measurement
The MCP3564RT-E/NC supports measurement systems using four differential input channels, making it appropriate for resistive bridges, strain-gauge conditioning, and differential voltage probes. The selected gain can amplify small sensor outputs before 24-bit digitization, while programmable digital filtering suppresses noise outside the desired measurement bandwidth. Place input protection and filtering near the converter, maintain a quiet reference and analog supply, and check differential input limits for the excitation scheme. SPI output allows the host controller to apply calibration coefficients and status monitoring.
推薦
Environmental and Energy Monitoring
The MCP3564RT-E/NC can support environmental monitoring systems that combine temperature, humidity, pressure, gas, or energy-monitoring outputs into one compact measurement module. Eight single-ended inputs reduce the need for separate converters when the monitored signals share suitable electrical ranges, while the internal reference supports a compact implementation. Choose the data rate and digital filter according to the environmental variable’s response time, and apply gain only where signal levels require it. The 3 V supply and 20-UQFN package are well suited to distributed, space-constrained sensor nodes.
推薦
Embedded Data Acquisition Modules
The MCP3564RT-E/NC is suitable for embedded data-acquisition modules that combine several analog measurements with an SPI microcontroller or digital signal processor. Its four differential or eight single-ended channels provide flexible multiplexing, while 24-bit resolution preserves fine detail in slowly changing or small-signal measurements. The 153.6 kSPS maximum rate supports moderate-speed acquisition without forcing the host to manage a fast flash-conversion interface. Designers should budget settling time between channel scans, synchronize software triggers correctly, and follow the exposed-pad layout guidance.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3564RT-E/NC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3564T-E/NC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-UQFN (3 x 3 mm) | 20-UQFN (3 x 3 mm) |
| ADC Resolution | 24 bit | 24 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS |
| Differential Input Channels | 4 channels | 4 channels |
| Single-Ended Input Channels | 8 channels | 8 channels |
| Conversion Architecture | Delta-sigma | Delta-sigma |
| Interface | SPI | SPI |
| Internal Reference | Present | Present |
| Order-Code Qualification | MCP3564RT-E/NC | MCP3564T-E/NC; verify temperature, packaging, and assembly conditions |
主要差異化特點
- Combines four differential channels with eight single-ended options (對比MCP3564T-E/NC)
- Maximum programmable conversion rate (對比MCP3564T-E/NC)
- Integrated precision-conversion features (對比MCP3564T-E/NC)
設計說明
Place the MCP3564RT-E/NC analog input and decoupling connections according to the manufacturer layout guidance, keeping traces short and separating sensitive input routes from SPI clock and data paths. The 20-UQFN package requires close attention to land geometry and exposed-pad connection. A compact analog section reduces susceptibility to board contamination and switching noise, while the internal reference should be decoupled with the prescribed component arrangement.
Choose input filtering, gain, digital-filter settings, and output data rate together. The converter reaches 153.6 kSPS, but maximum speed does not automatically provide maximum resolution or the fastest settled result for every channel. Verify acquisition timing for the selected output rate, allow sufficient conversion and settling intervals during multiplexed scans, and evaluate the analog filter against aliasing requirements before relying on the 24-bit nominal resolution.
The MCP3564RT-E/NC operates from a 3 V supply. Provide stable, low-noise power at the analog and digital supply pins and follow the manufacturer’s capacitor values and placement instructions. Keep switching-regulator and high-current digital paths away from the reference and input network. Because the internal reference is part of the measurement chain, reference stability and supply rejection should be included in the system error budget rather than treated as ideal conditions.
合規資訊
RoHS-compliant status is stated in the MCP3564RT-E/NC product description. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established.