Microchip Technology

MCP601T-I/SN - 2.8MHz Low-Power Op Amp | Microchip

部品番号: MCP601T-I/SN ✓ 生産中
<2 mV Vdss 230 uA Id 8-pin SOIC Package
MOQ: 1 |

MCP601T-I/SN 概要

The Microchip Technology MCP601T-I/SN is a single, low-power CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and less than 2 mV typical offset voltage, packaged in an 8-pin SOIC. It operates from a 2.7 V to 5.5 V supply and provides rail-to-rail output swing with a common-mode input range extending below ground.

An operational amplifier is a voltage-feedback amplifier used to increase signal amplitude, buffer high-impedance sources, compare voltages, or drive external loads through feedback. The MCP601 belongs to the broader CMOS operational-amplifier hierarchy, combining low input bias current, moderate gain bandwidth, high open-loop gain, and rail-to-rail output capability in a low-power integrated circuit.

Its 2.8 MHz gain-bandwidth product supports general-purpose signal conditioning at moderate frequencies. The 230 uA typical operating current is useful for portable and low-power systems, while the less-than-2 mV typical input offset supports precision-oriented applications. Rail-to-rail output operation maximizes usable output swing from a 2.7 V to 5.5 V supply, and the common-mode input range below ground simplifies single-supply sensing near zero volts.

The advanced CMOS implementation provides low bias current, high-speed operation, and high open-loop gain. With unity-gain stability, the device can be configured as a non-inverting or inverting amplifier without an additional compensation network. Its low quiescent current makes it appropriate for continuously powered sensor circuits, where every microampere contributes to the overall system power budget.

Typical uses include current sensing, portable instrumentation, sensor signal conditioning, low-frequency active filters, audio input stages, and industrial control interfaces. The 8-pin SOIC format is suitable for conventional surface-mount assembly, while the operating range and low-power characteristics support designs operating from regulated 3.3 V or 5 V rails.

For stable operation, place input and feedback components close to the amplifier pins, avoid long high-impedance input traces, and provide adequate bypassing between VDD and VSS. Common-mode and output-headroom checks are essential when operating near the supply rails, particularly with 2.7 V systems.

This page combines manufacturer specifications, sourcing guidance, drop-in family alternatives, comparison data, and practical circuit-design notes. These resources help engineers evaluate the MCP601T-I/SN beyond basic catalog parameters and select it for low-power, rail-to-rail signal-processing applications.

ドロップイン代替品: MCP601T-I/SN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MCP601T-I/SN (同一形状・フットプリント) — 相違点: Package, Typical Offset Voltage.

Microchip Technology
Package: 8-pin SOIC, 3.9 mm width class
Typical Offset Voltage: Less than 2 mV
Microchip Technology
Typical Offset Voltage: <2 mV

MCP601T-E/SN

✅ ドロップイン
Microchip Technology
📦 8-pin SOIC
Single operational amplifier · 1 circuit · CMOS · 2.7 V to 5.5 V · 2.8 MHz · 230 uA · <2 mV · Rail-to-rail

価格はお問い合わせください

データシートを見る →

MCP601-I/SN

✅ ドロップイン
Microchip Technology
📦 8-pin SOIC
Single general-purpose operational amplifier · 2.8 MHz · 230 uA · Less than 2 mV · 2.7 V to 5.5 V · Rail-to-rail

価格はお問い合わせください

データシートを見る →

MCP601T-I/SN 最大定格&電気的特性

Product Type Single operational amplifier
Channel Count 1 circuit
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Typical Input Offset Voltage <2 mV
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Output Swing Rail-to-rail
Common-Mode Input Swing Below ground to upper rail
Unity-Gain Stability 1
Process Technology Advanced CMOS
パッケージ 8-pin SOIC
実装タイプ Surface mount

MCP601T-I/SN ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 OUT — Operational-amplifier output
ピン 2 VSS — Negative supply or ground connection
ピン 3 +IN — Non-inverting input
ピン 4 -IN — Inverting input
ピン 5 NC — Not connected
ピン 6 VDD — Positive supply connection
ピン 7 NC — Not connected
ピン 8 NC — Not connected

主な用途

MCP601T-I/SN の用途: 6 件s: Portable Sensor Signal Conditioning, Battery-Powered Measurement Circuit, Precision Current Sensing, Active Audio Input Stage, Industrial Threshold Detection, Low-Frequency Active Filter.

🧩

Portable Sensor Signal Conditioning

The MCP601T-I/SN fits low-power sensor interfaces because its 230 uA typical operating current and 2.7 V minimum supply voltage allow operation close to the lower limits of a regulated battery rail. Place the amplifier in a non-inverting configuration when the sensor output must be biased around mid-supply, or use an inverting configuration when summing and impedance conversion are required. The rail-to-rail output helps preserve signal amplitude, while the input range extending below ground supports sensors whose output approaches zero volts.

🔋

Battery-Powered Measurement Circuit

Use the MCP601T-I/SN to amplify or buffer sensor signals in battery-operated measurement equipment where every microampere affects operating time. Its 230 uA typical operating current is the primary efficiency feature, while the 2.8 MHz gain-bandwidth product provides more bandwidth than required for many slow analog measurements. The single 2.7 V to 5.5 V supply simplifies system design, although a low-quiescent regulator and low-leakage sensor should be selected to maximize battery life.

⚡

Precision Current Sensing

The MCP601T-I/SN is suitable for amplifying the small differential voltage produced by a current-sense shunt. Its less-than-2 mV typical input offset helps preserve low-level measurements, and unity-gain stability supports direct voltage feedback around the amplifier. The rail-to-rail output can increase the usable signal range in a 2.7 V or 3.3 V system. Layout should keep the sense-pair traces short and matched so shunt drop and copper resistance do not obscure the measurement.

🎧

Active Audio Input Stage

The MCP601T-I/SN can serve as a modest audio input buffer when the design does not require high-voltage output swing or very low distortion specifications. Its 2.8 MHz gain-bandwidth product provides bandwidth for voice-band and limited full-range audio paths, while the 230 uA typical operating current suits portable and space-constrained equipment. Place a suitable coupling capacitor at the input, keep the input return path short, and verify that the selected gain does not create excessive noise-gain amplification.

🏭

Industrial Threshold Detection

The MCP601T-I/SN can compare a sensor or control signal against a reference in industrial threshold-detection circuits. Its less-than-2 mV typical input offset is useful when the difference between the input and reference is small, while the common-mode input range extending below ground permits operation near zero volts. The 8-pin SOIC package simplifies conventional PCB assembly. Use a clean reference, provide local supply bypassing, and account for input and output propagation delay where timing margins are important.

📡

Low-Frequency Active Filter

The MCP601T-I/SN is appropriate for first-order and moderate-order active-filter stages operating within its 2.8 MHz gain-bandwidth capability. Its unity-gain stability supports closed-loop gain settings around one, and the rail-to-rail output increases the available signal swing on a 2.7 V to 5.5 V supply. Component tolerances and the amplifier's finite gain-bandwidth response determine the practical filter response, so simulation should include realistic capacitance and resistance values before the circuit is released for production.

おすすめ製品の概要

MCP601T-I/SN Microchip Technology 使用用途: Portable Sensor Signal Conditioning, Battery-Powered Measurement Circuit, Precision Current Sensing, Active Audio Input Stage, Industrial Threshold Detection, Low-Frequency Active Filter MCP6002T-I/SNVAO Dual low-power amplifier family alternative 使用用途: Portable Sensor Signal Conditioning, Battery-Powered Measurement Circuit MCP602 Dual low-power op-amp family member 使用用途: Precision Current Sensing, Low-Frequency Active Filter MCP603 Single amplifier with chip-select family option 使用用途: Active Audio Input Stage MCP604 Quad low-power amplifier family member 使用用途: Industrial Threshold Detection
What are the key specifications of MCP601T-I/SN that engineers should know?
The MCP601T-I/SN is a single CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and less than 2 mV typical input offset voltage. According to the Microchip Technology MCP601 family datasheet, it operates from 2.7 V to 5.5 V and provides rail-to-rail output swing. The device is unity-gain stable and is available in an 8-pin SOIC package for surface-mount assembly.
What is the operating voltage of MCP601T-I/SN?
The MCP601T-I/SN operates from 2.7 V to 5.5 V with a single supply. According to the Microchip Technology MCP601 family datasheet, this range makes the amplifier suitable for 3.3 V and 5 V systems. The rail-to-rail output stage improves usable output swing, although designers should still verify output headroom at the required voltage and temperature.
What is the gain bandwidth of MCP601T-I/SN?
The MCP601T-I/SN has a gain-bandwidth product of 2.8 MHz. According to the Microchip Technology MCP601 family datasheet, this bandwidth is suitable for general-purpose, low-frequency signal conditioning and active-filter applications. Closed-loop bandwidth depends on the selected feedback topology and noise-gain requirements, so the 2.8 MHz value should not be treated as a guaranteed 2.8 MHz usable bandwidth in every configuration.
How much current does MCP601T-I/SN consume?
The MCP601T-I/SN has a typical operating current of 230 uA. According to the Microchip Technology MCP601 family datasheet, this low quiescent current supports battery-powered instrumentation, sensor interfaces, and portable measurement systems. Actual current varies with supply voltage, output activity, and load, so the complete operating-current limits should be checked against the worst-case design conditions.
Is MCP601T-I/SN rail-to-rail?
Yes, the MCP601T-I/SN provides rail-to-rail output swing and a common-mode input range that extends below ground. According to the Microchip Technology MCP601 family datasheet, these characteristics improve signal range in single-supply systems. Input and output headroom still depend on the common-mode voltage, load, supply voltage, and output voltage, so those conditions must be checked for the selected operating point.
Where can I download the MCP601T-I/SN datasheet PDF?
The official MCP601T-I/SN datasheet PDF is available from Microchip Technology at the official MCP601 family document link on this page. The document covers the MCP601/1R/2/3/4 family, including the single MCP601 configuration, and specifies the 2.7 V to 5.5 V supply range, 2.8 MHz gain-bandwidth product, electrical characteristics, package drawings, and application guidance.
Where can I find the MCP601T-I/SN pinout?
The MCP601T-I/SN pinout is shown in the Microchip Technology MCP601 family datasheet under the package and pin-configuration information. The device uses an 8-pin SOIC footprint. Use the pin-description table and package drawing when assigning supply, input, output, and no-connect positions rather than relying on a generic dual-amplifier SOIC pinout.
What can replace MCP601T-I/SN?
MCP601T-E/SN is a same-family, 8-pin SOIC alternative with the same listed 2.8 MHz gain-bandwidth product and 230 uA typical operating current, while differing in temperature-grade ordering designation. MCP601-I/SN is another 8-pin SOIC family alternative with the same fundamental electrical ratings. Confirm the required temperature range, supply limits, and pin configuration in the manufacturer datasheet before substituting either part.
Is MCP601T-I/SN the same as MCP601-I/SN?
The MCP601T-I/SN and MCP601-I/SN are members of the same single-amplifier family and use an 8-pin SOIC package with the same 2.8 MHz gain-bandwidth and 230 uA typical operating current. Their ordering suffixes distinguish qualification or packaging attributes, so engineers should compare the specified temperature grade and delivery configuration before treating them as interchangeable.
MCP601T-I/SN vs MCP601T-E/SN — which is better for industrial use?
The correct choice depends on the required temperature qualification rather than the core amplifier performance. Both devices are listed as single 8-pin SOIC amplifiers with a 2.8 MHz gain-bandwidth product and 230 uA typical current. According to Microchip Technology family documentation, the grade suffix determines the applicable temperature range, so compare the ordering table against the system's worst-case enclosure temperature.
When should I choose MCP601T-I/SN over another single low-power op amp?
Choose the MCP601T-I/SN when a design needs one amplifier with a 2.8 MHz gain-bandwidth product, rail-to-rail output, a common-mode input range extending below ground, and a typical operating current of 230 uA. It is particularly suitable for 2.7 V to 5.5 V sensor and instrumentation circuits. Select another device if the application requires substantially greater bandwidth, lower offset, lower noise, or a different amplifier configuration.
Is MCP601T-I/SN suitable for battery-powered sensor conditioning?
The MCP601T-I/SN is suitable for many battery-powered sensor-conditioning circuits because its typical operating current is 230 uA and its minimum supply voltage is 2.7 V. Its rail-to-rail output can improve utilization of a low-voltage supply, while the common-mode input range extending below ground supports signals near zero volts. A low-voltage regulator, load current, leakage, and sensor duty cycle must also be evaluated.
Where to buy MCP601T-I/SN online?
Use the Request a Quote form on this page to request MCP601T-I/SN availability, lot quantities, and current commercial terms. The part is an 8-pin SOIC, single-channel CMOS operational amplifier rated from 2.7 V to 5.5 V. The quote request is the appropriate route for confirming stock, lead time, packaging quantity, and any volume pricing for your specific build.
What is the price of MCP601T-I/SN?
The current commercial price for MCP601T-I/SN should be obtained through the Request a Quote form on this page. Pricing can depend on order quantity, date, reel quantity, and sourcing conditions, so a static figure may not reflect the terms available for your order. The request can confirm the exact MPN, 8-pin SOIC packaging, delivery quantity, and current lead time.
What is the lead time for MCP601T-I/SN?
The current lead time for MCP601T-I/SN should be confirmed through the Request a Quote form on this page. Lead time can vary with the required quantity, packaging configuration, and current inventory position. When requesting a quote, specify the annual and build quantities so the supplier can account for production planning rather than returning a generic single-unit availability statement.

エンジニアリング参考データ: MCP601T-I/SN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MCP601T-I/SN for a general-purpose, low-power analog signal path that needs one amplifier, a 2.7 V to 5.5 V supply, rail-to-rail output, and approximately 230 uA typical operating current. Its 2.8 MHz gain-bandwidth product is suitable for sensors, current-sense amplifiers, buffers, threshold detectors, and modest active filters. Consider MCP601T-E/SN when the product's temperature-grade ordering designation better matches the required qualification, while retaining the same 8-pin SOIC footprint. MCP601-I/SN is another same-family choice when its ordering attributes meet the production requirements. Neither alternative changes the core bandwidth or nominal current rating. Do not substitute the dual MCP6002T-I/SNVAO without redesigning the pin connections, and choose a different amplifier when the circuit requires substantially lower offset, lower noise, higher bandwidth, or a dual or quad configuration.

代替品との比較

パラメータ この製品 MCP601T-E/SN MCP601-I/SN
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Configuration Single operational amplifier Single operational amplifier Single operational amplifier
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz
Typical Operating Current 230 uA 230 uA 230 uA
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Typical Input Offset Voltage <2 mV <2 mV <2 mV
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Unity-Gain Stable Yes Yes Yes

主な差別化要因

  • Low-power operation with useful moderate bandwidth (vs MCP601T-E/SN)
  • Single-amplifier footprint without dual-channel pin changes (vs MCP6002T-I/SNVAO)
  • Rail-to-rail output for low-voltage systems (vs MCP601-I/SN)

設計ノート

Place the input, feedback, and bypass components close to the MCP601T-I/SN pins. Keep the inverting and non-inverting traces short and away from high-current switching paths. If the input source has high impedance, minimize leakage from board contamination and guard the input node when practical. These layout practices reduce parasitic capacitance, stabilize the closed-loop response, and limit injected noise.

Add local VDD-to-VSS bypass capacitance near the amplifier and use separate routing for supply current and sensitive signal returns. The MCP601T-I/SN requires a 2.7 V to 5.5 V supply, so confirm that supply noise does not force the output beyond the usable rail-to-rail region. For battery-powered designs, include the amplifier's 230 uA typical operating current in the standby and active power budgets.

Do not assume that rail-to-rail output eliminates all headroom requirements. Verify the output waveform at the required frequency, load, supply voltage, and temperature because output swing and drive capability depend on operating conditions. Also avoid placing the non-inverting input directly beside the output in a voltage follower; even a small parasitic coupling path can reduce stability or distort the result.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page and family datasheet do not establish the requested compliance statuses in the accessed material. The AEC-Q100 reference shown for the orderable listing was not treated as qualification evidence for the standard-temperature MCP601T-I/SN without a corresponding Microchip qualification statement.

関連検索

mcp601t datasheet MCP601T-I/SN datasheet MCP601T-I/SN datasheet pdf MCP601T-I/SN pinout MCP601T-I/SN equivalent MCP601T-I/SN replacement MCP601T-I/SN drop-in replacement MCP601T-I/SN vs MCP601T-E/SN MCP601 2.8MHz operational amplifier MCP601T-I/SN 8-SOIC MCP601T-I/SN application circuit MCP601T-I/SN price

関連部品&用語

Microchip Technology MCP601T-I/SN MCP601 MCP601T-E/SN MCP601-I/SN MCP6002T-I/SNVAO MCP602 MCP603 MCP604 operational amplifier op amp CMOS voltage-feedback amplifier rail-to-rail output common-mode input range gain-bandwidth product input offset voltage quiescent current unity-gain stability 8-pin SOIC SOIC package family surface-mount package signal conditioning current sensing active filter RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示