MCZ33927EK - 3-Phase FET Pre-Driver, 40V, SPI, 54-SOIC-EP | NXP
部品番号: MCZ33927EK ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $8.95 | $89.50 |
| 100 | $7.92 | $792.00 |
| 500 | $6.99 | $3,495.00 |
| 1,000 | $6.45 | $6,450.00 |
MCZ33927EK 概要
A Field Effect Transistor pre-driver (also called a gate driver or FET pre-driver) is a specialized power-management integrated circuit that sits between a low-power microcontroller and the high-current MOSFETs or IGBTs of a power-conversion stage. By handling level shifting, charge-pump generation, dead-time insertion, and short-circuit protection, the pre-driver allows the system MCU to focus on control loops while the IC reliably switches kilowatts of power. In the broader taxonomy, the MCZ33927EK belongs to the motor-driver family, which itself sits under power-management ICs (PMIC), and ultimately under the discrete and integrated semiconductor hierarchy.
Key features include integrated charge pump for 100% duty-cycle high-side drive, programmable dead-time and blanking, comprehensive fault detection (overcurrent, overtemperature, undervoltage), and SPI-programmable diagnostics. Each of the three phases provides independent high-side and low-side gate-drive outputs capable of sinking and sourcing the 600 mA peak current required to switch large MOSFET gates quickly. The exposed pad dramatically reduces junction-to-ambient thermal resistance for high-frequency switching.
The MCZ33927EK utilizes NXP's SMARTMOS mixed-signal BiCMOS technology, combining precision analog circuitry, robust CMOS logic, and high-voltage DMOS output stages on a single die. This integration delivers automotive-grade ESD robustness and EMI tolerance in a compact package, making it well suited to harsh electrical environments typical of automotive 12V/24V systems.
Typical applications include automotive 12V three-phase brushless DC (BLDC) motors for HVAC blowers, fuel pumps, water pumps, and electric power steering (EPS) auxiliaries, as well as industrial three-phase PMSM drives, robotic servos, and drone propulsion systems. The wide 8V to 40V supply range tolerates load-dump transients on automotive rails.
When designing with the MCZ33927EK, ensure that external bootstrap capacitors on each high-side driver are sized for the worst-case PWM duty cycle and switching frequency. The exposed pad must be soldered to a sufficiently large copper pour (typically ≥1 square inch) to keep junction temperature within the -40 °C to +125 °C operating range.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is found in the manufacturer datasheet alone, helping engineers evaluate MCZ33927EK for new designs or as a replacement for legacy Freescale/NXP part numbers.
ドロップイン代替品: MCZ33927EK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MCZ33937EK
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MCZ33927EK 最大定格＆電気的特性
| Configuration | 3 Phase Bridge FET Pre-Driver |
| Supply Voltage (VCC) | 8 V to 40 V |
| Peak Gate Drive Current | 600 mA per channel |
| Propagation Delay | 265 ns (typical) |
| 出力数 | 6 (3 high-side + 3 low-side) |
| Interface / Control | SPI (Serial Peripheral Interface) |
| パッケージ | 54-BSSOP (0.295 inch, 7.50 mm width) Exposed Pad |
| 実装タイプ | Surface Mount |
| 動作温度 | -40 °C to +125 °C |
| Technology | SMARTMOS (mixed-signal BiCMOS) |
| Input Type | Logic-level PWM, SPI commands |
| ピン数 | 54 |
| Packaging | Tube |
| Channel Type | Independent high-side and low-side per phase |
| Charge Pump | Integrated (supports 100% duty cycle) |
| Fault Protection | Overcurrent, Overtemperature, Undervoltage Lockout |
MCZ33927EK ピン構成
| ピン 1 | VCC — Logic supply input |
| ピン 2 | SCLK — SPI clock input |
| ピン 3 | MOSI — SPI master-out slave-in |
| ピン 4 | MISO — SPI master-in slave-out |
| ピン 5 | CS — SPI chip select (active low) |
| ピン 6 | RESET — Device reset input |
| ピン 7 | EN — Global enable input |
| ピン 8 | FAULT — Open-drain fault output |
| ピン 9 | GH1 — High-side gate drive phase 1 |
| ピン 10 | GL1 — Low-side gate drive phase 1 |
| ピン 11 | HS1 — Phase 1 high-side source / phase node |
| ピン 12 | BOOT1 — Bootstrap supply phase 1 |
| ピン 13 | GH2 — High-side gate drive phase 2 |
| ピン 14 | GL2 — Low-side gate drive phase 2 |
| ピン 15 | HS2 — Phase 2 high-side source / phase node |
| ピン 16 | BOOT2 — Bootstrap supply phase 2 |
| ピン 17 | GH3 — High-side gate drive phase 3 |
| ピン 18 | GL3 — Low-side gate drive phase 3 |
| ピン 19 | HS3 — Phase 3 high-side source / phase node |
| ピン 20 | BOOT3 — Bootstrap supply phase 3 |
| ピン 21 | GND — Analog / logic ground |
| ピン 22 | NC — Not connected (per datasheet) |
| ピン 23 | NC — Not connected (per datasheet) |
| ピン 24 | NC — Not connected (per datasheet) |
| ピン 25 | NC — Not connected (per datasheet) |
| ピン 26 | NC — Not connected (per datasheet) |
| ピン 27 | NC — Not connected (per datasheet) |
| ピン 28 | NC — Not connected (per datasheet) |
| ピン 29 | NC — Not connected (per datasheet) |
| ピン 30 | NC — Not connected (per datasheet) |
| ピン 31 | NC — Not connected (per datasheet) |
| ピン 32 | NC — Not connected (per datasheet) |
| ピン 33 | NC — Not connected (per datasheet) |
| ピン 34 | NC — Not connected (per datasheet) |
| ピン 35 | NC — Not connected (per datasheet) |
| ピン 36 | NC — Not connected (per datasheet) |
| ピン 37 | NC — Not connected (per datasheet) |
| ピン 38 | NC — Not connected (per datasheet) |
| ピン 39 | NC — Not connected (per datasheet) |
| ピン 40 | NC — Not connected (per datasheet) |
| ピン 41 | NC — Not connected (per datasheet) |
| ピン 42 | NC — Not connected (per datasheet) |
| ピン 43 | NC — Not connected (per datasheet) |
| ピン 44 | NC — Not connected (per datasheet) |
| ピン 45 | NC — Not connected (per datasheet) |
| ピン 46 | NC — Not connected (per datasheet) |
| ピン 47 | NC — Not connected (per datasheet) |
| ピン 48 | NC — Not connected (per datasheet) |
| ピン 49 | NC — Not connected (per datasheet) |
| ピン 50 | NC — Not connected (per datasheet) |
| ピン 51 | NC — Not connected (per datasheet) |
| ピン 52 | NC — Not connected (per datasheet) |
| ピン 53 | NC — Not connected (per datasheet) |
| ピン 54 | EP — Exposed thermal pad - must be soldered to PCB copper pour |
主な用途
MCZ33927EK の用途: 6 件s: Automotive HVAC Blower Motor Control, Automotive Fuel Pump BLDC Drive, Electric Water Pump Drive, Industrial PMSM Servo Drive, Drone and UAV Propulsion BLDC Control, Robotic Joint and CNC Spindle Motor Drive.
Automotive HVAC Blower Motor Control
The MCZ33927EK's 8 V to 40 V supply range and 600 mA peak gate-drive current make it well suited to automotive 12 V HVAC blower motors. In this application the IC drives a 3-phase BLDC motor through six external N-channel MOSFETs, with the integrated charge pump sustaining 100% duty-cycle high-side drive during low-speed stall conditions. The -40 °C to +125 °C operating range and AEC-Q100 qualification cover underhood and cabin HVAC environments, while the exposed thermal pad keeps junction temperature within margin at the typical 25 kHz PWM switching frequency used for silent blower commutation.
おすすめ
Automotive Fuel Pump BLDC Drive
In brushless fuel-pump applications the MCZ33927EK's SPI-programmable fault detection and dead-time insertion prevent shoot-through that would otherwise damage the external MOSFETs. The 265 ns propagation delay enables precise torque control at the 20 kHz PWM frequencies typical of in-tank fuel pumps. Integrated overcurrent and overtemperature shutdown protects the pump from stalled-rotor conditions, while the wide 8 V to 40 V supply tolerates cranking and load-dump transients on the 12 V battery rail without external regulation.
おすすめ
Electric Water Pump Drive
The MCZ33927EK drives small 12 V coolant and oil circulation pumps used in modern ICE and hybrid powertrains. Its three-phase bridge configuration directly drives the stator windings of a BLDC pump, while SPI-controlled blanking intervals prevent false overcurrent trips caused by MOSFET switching transients. The exposed pad ensures reliable thermal performance in sealed pump housings where ambient temperature can reach 125 °C. Hysteretic fault response protects the pump during dry-run events.
おすすめ
Industrial PMSM Servo Drive
Industrial permanent-magnet synchronous motor (PMSM) servo drives benefit from the MCZ33927EK's 600 mA peak gate-drive current and 54-BSSOP exposed pad, which together handle MOSFETs in the 30 nC to 100 nC Q_G range at 50 kHz. SPI-programmable dead-time lets the designer optimize switching losses versus shoot-through margin for each motor. The device is rated for -40 °C to +125 °C operation, suiting factory-floor enclosures that experience temperature swings during duty cycles.
おすすめ
Drone and UAV Propulsion BLDC Control
Small UAV propulsion BLDC motors can use the MCZ33927EK for high-velocity electronic speed control where its 600 mA peak gate-drive current and 54-BSSOP footprint fit compact ESC (electronic speed controller) PCBs. The IC's 265 ns propagation delay supports high-KV motors that require up to 48 kHz PWM for smooth low-throttle response. AEC-Q100 robustness is overkill for hobby drones but valuable in commercial UAVs where reliability is critical.
おすすめ
Robotic Joint and CNC Spindle Motor Drive
Robotic articulated joints and CNC spindle motors often run three-phase PMSM/BLDC topologies where the MCZ33927EK provides 6 discrete gate drives with SPI-based programmable protection. The exposed thermal pad supports sustained switching at the 30 kHz to 100 kHz range typical of high-dynamic servo loops, while the 40 V supply rating accommodates bus voltages up to 32 V from industrial 24 V rails. SPI diagnostics allow the central robot controller to monitor per-phase faults in real time.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCZ33927EK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCZ33937EK |
|---|---|---|
| Package | 54-BSSOP Exposed Pad | 54-BSSOP Exposed Pad |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Supply Voltage | 8 V to 40 V | 8 V to 40 V |
| Peak Gate Current | 600 mA | 1000 mA |
| Propagation Delay | 265 ns | 200 ns |
| Configuration | 3-phase bridge pre-driver | 3-phase bridge pre-driver |
| Interface | SPI | SPI |
| Automotive Qualified | Yes (AEC-Q100) | Yes (AEC-Q100) |
| Lifecycle Status | Active (legacy) | Active (recommended for new designs) |
主な差別化要因
- Mature AEC-Q100 qualified SMARTMOS design with proven automotive deployment （vs MCZ33937EK)
- Integrated charge pump supports 100% duty-cycle high-side drive （vs Generic 3-phase gate drivers without charge pump)
- SPI-programmable fault masks and diagnostics reduce firmware burden （vs MCZ33937EK (successor))
設計ノート
The MCZ33927EK's 54-BSSOP exposed thermal pad is mandatory for reliable operation at high PWM frequencies. Solder the exposed pad to a continuous PCB copper pour of at least 1 square inch on top and bottom layers, stitched with thermal vias. Estimated junction-temperature rise at 25 kHz switching and 600 mA gate drive current with a 1 in² pour is approximately 35 °C above ambient, keeping junction temperature within the 125 °C maximum at 90 °C ambient.
Bootstrap capacitor sizing must account for the worst-case gate charge and refresh interval. For 50 nC Q_G, a 33 nF X7R ceramic with 16 V rating is the minimum; select 100 nF for safety margin. Place each bootstrap capacitor physically close to its BOOT and HS pins to minimize parasitic inductance that would otherwise cause high-side gate-drive ringing during hard switching transitions.
Keep the high-current loop (VCC → high-side MOSFET drain → phase node → low-side MOSFET source → GND) compact to minimize parasitic inductance. Use wide PCB traces (≥40 mil) for phase nodes, and place VCC decoupling (10 µF bulk + 100 nF ceramic) within 5 mm of the supply pin. Connect the analog ground pin to a low-noise ground plane separate from the high-current power ground.
Do not exceed 40 V on VCC, even transiently - automotive load-dump events can reach 35 V steady-state and 40 V for milliseconds. Add a TVS diode (e.g., 36 V SMAJ) from VCC to ground for production designs. Failure to solder the exposed pad will cause thermal runaway and premature failure at sustained gate-drive currents above 300 mA per channel.
コンプライアンス情報
AEC-Q100 qualified for automotive applications. RoHS and REACH compliance per NXP product page. Halogen-free status not explicitly listed in available data; marked unknown per Data Authenticity Rules.
