MIMXRT1061CVJ5B - 528MHz Cortex-M7 MCU | NXP | Industrial
部品番号: MIMXRT1061CVJ5B ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MIMXRT1061CVJ5B 概要
A crossover processor is a semiconductor category that combines microcontroller real-time operation with higher-level processing capabilities. Unlike a conventional microcontroller optimized around deterministic peripheral control, the i.MX RT1060 family provides extensive connectivity, memory interfaces, security features, and graphical-media acceleration for connected embedded systems. The Arm Cortex-M7 architecture belongs to the microcontroller processor hierarchy and executes from tightly coupled memory for predictable control performance.
According to the verified product listings, the MIMXRT1061CVJ5B is identified as an RT1060 device with a 528 MHz Cortex-M7 core and a 196-LFBGA package. Distributor and aggregator listings also identify this orderable configuration as a fixed USB variant. The package uses bottom-side ball terminals and surface-mount assembly, making careful PCB escape routing and thermal management essential.
The i.MX RT1060 crossover-processor family is designed to bridge MCU-class control and higher-end embedded workloads. Its integrated feature set supports connected industrial equipment, human-machine interfaces, communications infrastructure, and real-time control systems. A separate NXP cross-reference result for the DVL6B variant advertises a 600 MHz Cortex-M7 core, but that variant is not treated as a drop-in substitute because its verified frequency differs by approximately 13.6 percent and other ordering details are not established here.
Typical design use includes industrial gateways, connected controllers, operator panels, building automation equipment, and networked sensors. The device can manage communication tasks alongside deterministic peripheral control without adopting a higher-power application-processor architecture. Developers should confirm memory configuration, pin multiplexing, peripheral availability, clock limits, security features, and package-level routing against the official NXP datasheet before release.
For PCB implementation, follow the manufacturer land pattern, ball-pitch, via, and decoupling guidance rather than generic BGA rules. Validate high-speed memory and communication interfaces with controlled-impedance routing, continuous reference planes, and signal-integrity simulations. Production designs should also review errata, boot configuration, power sequencing, firmware support, and long-term availability.
This page consolidates verified NXP and distributor information, exact package identification, application guidance, design cautions, and candid replacement analysis. It distinguishes confirmed data from parameters that still require datasheet verification so procurement and engineering teams can evaluate the part efficiently without mistaking assumptions for released specifications.
ドロップイン代替品: MIMXRT1061CVJ5B — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MIMXRT1061DVL6B
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MIMXRT1061CVJ5B 最大定格＆電気的特性
| Product Type | 32-bit crossover microprocessor / Arm Cortex-M7 MCU |
| Product Series | i.MX RT1060 |
| Processor Core | Arm Cortex-M7 |
| Maximum Verified Core Frequency | 528 MHz |
| Architecture | 32-bit ARM |
| パッケージ | 196-LFBGA (12 x 12 mm) |
| Terminal Count | 196 balls |
| Terminal Position | Bottom |
| Package Shape | Square |
| 実装タイプ | Surface Mount |
| USB Variant | Fixed USB |
| External Memory Support | External memory interface indicated by verified distributor description |
| Integrated ROM | 128 KB according to verified GlobalSpec listing |
| ライフサイクル状態 | Active |
MIMXRT1061CVJ5B square ピン配置ガイド
MIMXRT1061CVJ5B (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MIMXRT1061CVJ5B.
詳細は データシート をご参照ください。
主な用途
MIMXRT1061CVJ5B の用途: 6 件s: Industrial Gateway and Controller, Human-Machine Interface, Building Automation Equipment, Networked Sensor Hub, Data Acquisition and Test Equipment, Connected Audio and Media Endpoint.
Industrial Gateway and Controller
The MIMXRT1061CVJ5B fits industrial gateway designs that must combine protocol handling with real-time control. Its verified 528 MHz Arm Cortex-M7 core provides substantial compute headroom, while the i.MX RT1060 crossover-processor platform targets connected embedded products. Place Ethernet, USB, and serial connectivity alongside deterministic sensor and actuator control, then validate boot, interrupt latency, memory access, and peripheral timing against the NXP documentation.
おすすめ
Human-Machine Interface
The MIMXRT1061CVJ5B can support operator panels and HMI controllers where graphical updates coexist with deterministic control tasks. The 528 MHz Cortex-M7 core is appropriate for responsive peripheral management and connected user-interface workloads in the i.MX RT1060 family. Storage media, display interfaces, touch input, Ethernet, and USB must be checked for exact pin multiplexing, electrical limits, and software support before schematic capture.
おすすめ
Building Automation Equipment
For HVAC controllers, room modules, and building-automation nodes, the MIMXRT1061CVJ5B combines a 528 MHz Cortex-M7 core with crossover-processor capabilities in a compact 12 x 12 mm BGA. This allows network services and local control logic to coexist on one device. Designers should verify low-power modes, analog and digital I/O requirements, communication timing, watchdog behavior, and the exact industrial temperature grade in the released data.
おすすめ
Networked Sensor Hub
The MIMXRT1061CVJ5B is a candidate for a networked sensor hub that must aggregate measurements, perform local processing, and maintain communications. Its verified 528 MHz Arm Cortex-M7 core offers more performance headroom than a basic control MCU, while the crossover-processor architecture supports richer embedded workloads. Confirm the required ADC, timers, sensor interfaces, Ethernet or USB path, memory map, and low-power targets before selecting it for battery-constrained equipment.
おすすめ
Data Acquisition and Test Equipment
The MIMXRT1061CVJ5B can coordinate data-acquisition workflows in compact industrial test and measurement products. The 528 MHz Cortex-M7 core can service control logic and data movement, while the active i.MX RT1060 family targets embedded connectivity. Designers should use the exact NXP peripheral list to select ADC, timer, USB, Ethernet, and display resources, then validate signal-chain accuracy, sampling timing, buffering, calibration storage, and firmware support.
おすすめ
Connected Audio and Media Endpoint
The MIMXRT1061CVJ5B is a potential fit for connected media endpoints that combine low-latency control with network or USB data transfer. Its verified 528 MHz Cortex-M7 performance provides processing capacity beyond basic GPIO control, and the fixed USB ordering designation may simplify certain host or peripheral architectures. Exact USB role, audio interfaces, memory, DMA channels, and pin assignments must be verified before assuming a complete audio design is supported.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MIMXRT1061CVJ5B — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MIMXRT1061DVL6B |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum Verified Frequency | 528 MHz | 600 MHz, 13.6% above target |
| Product Series | i.MX RT1060 | i.MX RT1060 |
| Architecture | 32-bit ARM | 32-bit ARM Cortex-M7 |
| Lifecycle Status | Active | Active |
主な差別化要因
- Exact verified orderable configuration （vs MIMXRT1061DVL6B)
- Fixed USB ordering variant （vs MIMXRT1061DVL6B)
- Verified compact 12 x 12 mm BGA footprint （vs MIMXRT1061DVL6B)
設計ノート
Use the official NXP land pattern, ball map, via recommendations, and assembly process rather than treating this as a generic 196-ball BGA. Preserve escape-routing access and place decoupling capacitors adjacent to the relevant supply balls. A 12 x 12 mm land pattern leaves little room for routing error, so finalize escape paths and layer transitions before placing high-speed interfaces and confirm PCB stack-up with the fabricator.
Confirm every supply domain, voltage tolerance, sequencing rule, and decoupling value from the exact MIMXRT1061CVJ5B datasheet before power-up. Separate noisy and sensitive rails according to the manufacturer reference configuration, and account for startup current as well as steady-state consumption. Because verified excerpts do not provide operating voltage limits or current consumption, no rail value should be inferred from related RT1060 devices.
Do not substitute MIMXRT1061DVL6B solely because both names contain MIMXRT1061. The verified frequency differs from 528 MHz to 600 MHz, and package, pins, boot configuration, memory, and peripherals were not established. Review NXP ordering information, the complete ball table, errata, and firmware SDK support. For production sourcing, also distinguish the exact orderable suffix from reel, tray, or other shipment codes.
Route high-speed external-memory and communication interfaces with continuous reference planes, controlled impedance, and topology derived from the NXP hardware design guide. Minimize stubs and unnecessary via transitions, and keep clocks away from sensitive inputs. If Ethernet, USB, audio, or display interfaces are used, complete signal-integrity and power-integrity simulations with actual stack-up, connector, and component data before fabrication.
Validate boot configuration, clock sources, memory initialization, and peripheral pin multiplexing early in firmware bring-up. Boot and pin settings that work on another RT1060 ordering code may not match this exact suffix. Review current NXP errata and release notes, and schedule pin, boundary-scan, power-consumption, and high-temperature testing so board-level assumptions are replaced by measured behavior.
コンプライアンス情報
The verified search excerpts do not provide authoritative compliance declarations for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals status on the current NXP product page or applicable material declarations.
