MK10DX128ZVMD10 - 100MHz Cortex-M4 MCU | NXP | Industrial
部品番号: MK10DX128ZVMD10 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.5699 | $7.57 |
| 10 | $7.5699 | $75.70 |
| 100 | $7.5699 | $756.99 |
| 500 | $7.5699 | $3,784.95 |
| 1,000 | $7.5699 | $7,569.90 |
MK10DX128ZVMD10 概要
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one device. Within the embedded-computing hierarchy, this part is an ARM Cortex-M4 MCU in the Kinetis K10 family. It combines general-purpose control, serial communications, timers, and other embedded resources in a single component.
The verified listing identifies a 32-bit architecture, 100 MHz clock capability, 128 KB x 8 flash organization, 24 I/O ports, and industrial-grade temperature class. Its low-voltage 1.71 V to 3.6 V operating range supports embedded systems that cannot use a conventional 5 V-only supply. Exact RAM, peripheral, pinout, and memory-map details were not supplied and therefore require confirmation from the manufacturer datasheet.
The MK10DX128ZVMD10 is positioned for industrial controllers, sensor-hub equipment, communication equipment, and compact embedded platforms requiring a 32-bit ARM core. Its 100 MHz maximum listed speed provides more processing headroom than lower-frequency 8-bit or 16-bit microcontrollers, while the integrated 128 KB flash reduces the need for external program-memory devices.
The principal design consideration is package complexity. The device uses a 144-ball MAPBGA rather than a through-hole package, so PCB layout, via density, assembly capability, inspection, and rework must be evaluated before release. Verify the complete pinout, exposed-pad requirements, decoupling values, clock setup, and memory limits against the official NXP documentation.
This page combines verified distributor specifications, lifecycle information, package details, sourced availability, and practical selection guidance. Unknown electrical and mechanical parameters are explicitly marked for validation rather than inferred from similar Kinetis devices.
ドロップイン代替品: MK10DX128ZVMD10 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMK10DX128ZVMD10 最大定格＆電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Family | Kinetis K10 |
| Maximum Clock Speed | 100 MHz |
| Secondary Reported Clock Speed | 50 MHz |
| Processor Architecture | ARM Cortex-M4 |
| Instruction Width | 32 bit |
| Flash Memory | 128 KB (128K x 8) |
| ROM Type | Flash |
| Supply Voltage Range | 1.71 V to 3.6 V |
| I/O Ports | 24 |
| パッケージ | 144-MAPBGA, 13 mm x 13 mm |
| Package Type | MAPBGA |
| Ball Count | 144 balls |
| Temperature Grade | Industrial |
| Reported Mounting Style | Surface mount |
| Reported Package Family | LBGA |
| Lifecycle Stage | Active |
MK10DX128ZVMD10 lbga ピン配置ガイド
MK10DX128ZVMD10 (lbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MK10DX128ZVMD10.
詳細は データシート をご参照ください。
主な用途
MK10DX128ZVMD10 の用途: 6 件s: Industrial Embedded Controller, Sensor Hub and Data Aggregator, Communication Equipment, Compact Data Acquisition Unit, Automotive or Vehicle Control Module, Motor and Machinery Control.
Industrial Embedded Controller
The MK10DX128ZVMD10 fits preliminary industrial controller designs requiring a 32-bit ARM Cortex-M4 core, up to 100 MHz operation, and 128 KB of integrated flash. Its verified 1.71 V to 3.6 V supply range suits low-voltage embedded rails, while the industrial temperature classification aligns with equipment designed for controlled industrial environments. The MCU can serve as the central controller for sequencing, state machines, local I/O, and communications. Before schematic release, confirm the full temperature range, RAM capacity, watchdog functions, peripheral inventory, reset requirements, and exact BGA pin map because those values were absent from the supplied snippets.
おすすめ
Sensor Hub and Data Aggregator
The 100 MHz ARM Cortex-M4 core and 128 KB flash in the MK10DX128ZVMD10 provide a practical base for a compact sensor hub that gathers readings, performs local filtering, and forwards status to another controller. The verified 24 I/O ports can support discrete sensing or control signals, while flash provides space for firmware and configuration tables. The device is not suitable for an unsupported design until its serial peripherals, pin multiplexing, RAM, and low-power behavior are verified in the datasheet. System partitioning should leave memory margin for drivers, calibration data, diagnostics, and field updates.
おすすめ
Communication Equipment
MK10DX128ZVMD10 is a candidate for communication equipment where a 32-bit control core must coordinate protocol handling, configuration, status reporting, and local automation. Its verified maximum clock of 100 MHz offers processing headroom for event-driven firmware, while 128 KB flash can hold moderate protocol stacks and application logic. The integration level of a BGA device can support compact boards, but the 144-MAPBGA footprint demands advanced PCB and assembly capability. Engineers must verify the exact serial controllers, pin multiplexing, clock tolerance, DMA resources, and electromagnetic-performance requirements before committing this MCU to a communications product.
おすすめ
Compact Data Acquisition Unit
The MK10DX128ZVMD10 can form the control core of a compact acquisition unit when firmware must combine timing, local data handling, and communication in one industrial-grade device. Its 32-bit ARM architecture and verified 100 MHz maximum clock provide more instruction headroom than basic 8-bit control, while the 128 KB flash stores application code and calibration logic. The supplied evidence does not include converter interfaces or RAM capacity, so analog front-end selection and buffer depth must be validated separately. Confirm whether ADC, timer, trigger, and buffer requirements are met before final component approval.
おすすめ
Automotive or Vehicle Control Module
The MK10DX128ZVMD10 may be considered for vehicle-related control modules because the indexed data identifies an ARM Cortex-M4 MCU with 100 MHz maximum speed, 128 KB flash, and industrial-grade classification. Those attributes fit real-time control and communication workloads, but industrial grade is not automatically equivalent to automotive qualification. Verify AEC-Q100 status, extended-temperature behavior, transient immunity, supply requirements, functional safety claims, and lifecycle commitments directly from NXP. Firmware partitioning and diagnostic requirements should also be assessed before using the MCU in a safety- or security-relevant vehicle design.
おすすめ
Motor and Machinery Control
The 32-bit Cortex-M4 core of MK10DX128ZVMD10 is suitable for preliminary selection in machinery and motor-control subsystems where deterministic control loops, sequencing, and local diagnostics are required. A maximum listed clock of 100 MHz supports efficient computation, and 128 KB flash can store control algorithms and configuration. Suitable power stages must be designed separately because the MCU is not a power-semiconductor driver. Verify timer channels, PWM outputs, encoder interfaces, analog channels, fault pins, watchdog behavior, and 1.71 V to 3.6 V power sequencing against the exact datasheet before creating the control PCB.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MK10DX128ZVMD10 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
設計ノート
Treat the 144-MAPBGA as a fine-pitch assembly constraint rather than a conventional leaded footprint. Route the board to the exact NXP package drawing, maintain the prescribed ball-pad geometry and escape strategy, and provide all required power, ground, and decoupling connections. Because the supplied sources conflict by also exposing an unrelated QFN-32 description, freeze the mechanical part number against manufacturer documentation before Gerber release. Prototype assembly should use a board and process already qualified for this land pattern.
Design the supply network for the verified 1.71 V to 3.6 V range rather than assuming 5 V tolerance. Separate analog and digital supply paths where the exact device architecture allows, place required bypass capacitors at their specified package pins, and validate startup, reset, and brownout behavior with the final power source. The source set does not provide current consumption or regulator recommendations, so those values must come from the manufacturer datasheet before component sizing.
Do not substitute a visually similar Kinetis device solely because its flash size is larger or its core is also Cortex-M4. The MK10DX128ZVMD10 uses a 144-MAPBGA package, and the supplied alternative evidence does not establish a matching ball map. Before replacement, compare every power pin, ground ball, I/O function, analog input, clock connection, reset path, exposed feature, and software migration requirement. Treat unqualified cross-reference results as redesign leads, not drop-in approvals.
Plan signal-integrity and debug access at the schematic stage. The source data identifies 24 I/O ports but does not identify their multiplexing, drive strength, or analog capabilities. Determine the actual pin allocation from the official pin table and keep sensitive timing interfaces away from high-edge-rate switching where practical. Include programming and debug access required by the selected Kinetis development system, and review ball-via-in-pad or other assembly rules with the PCB manufacturer.
コンプライアンス情報
The supplied verified data confirms industrial classification and active lifecycle but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.
