MK22FN512VMP12 - 120MHz Cortex-M4F 512KB MCU | NXP
部品番号: MK22FN512VMP12 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MK22FN512VMP12 概要
A microcontroller is a compact computer system integrated onto one semiconductor die. It includes a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces. The MK22FN512VMP12 belongs to the NXP Kinetis K22F family and is designed for applications requiring efficient processing, flexible low-power operation, and extensive peripheral integration without a separate floating-point processor.
Key features include an ARM Cortex-M4F processor core, 120 MHz maximum operating frequency, 512 KB flash, 128 KB SRAM, full-speed USB connectivity, and integrated analog resources. The floating-point unit supports efficient single-precision arithmetic, while the 512 KB flash capacity accommodates larger embedded applications, USB firmware, and protocol stacks. The 64-MAPBGA package also supports compact, high-density PCB layouts.
The device combines a high-performance Cortex-M4F core with low-power design flexibility and a broad peripheral set. Its architecture supports both performance-oriented control and low-power embedded operation, making it suitable for connected equipment that must balance processing throughput, USB functionality, analog measurement, and board-space constraints. The 5 mm by 5 mm package requires careful PCB layout and thermal verification during manufacturing.
Typical applications include industrial control systems, medical equipment, USB-connected data acquisition, communications equipment, motor-control systems, and low-power embedded products. NXP describes the family as optimized for cost-sensitive applications requiring USB connectivity, processing efficiency, and high peripheral integration with a floating-point unit.
Designers should verify the exact pin multiplexing, package ball assignments, power requirements, clock configuration, and USB routing against the manufacturer datasheet before layout. The 64-MAPBGA package is not a land-grid array with exposed pads in the usual sense; its ball assignments must be checked carefully. For firmware migration, memory-map differences, peripheral availability, and clock-tree behavior should be reviewed instead of assuming that any similar Kinetis part is a drop-in replacement.
This page consolidates the verified manufacturer and distributor information, package details, technical positioning, selection guidance, and engineering considerations for engineers evaluating the MK22FN512VMP12.
ドロップイン代替品: MK22FN512VMP12 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MK22FN512VMP12 （同一形状・フットプリント） — 相違点: Mounting Type, SRAM, Package, Core Processor, Maximum Clock Frequency.
クイック比較ツール — 並列比較する代替部品を選択:
MK22FN256VMP12
✅ ドロップイン✓ 在庫あり
$9.85 / 個
データシートを見る →MK22FN128VMP10
✅ ドロップイン✓ 在庫あり
$3.18 / 個
データシートを見る →MK22FN512VMP12 最大定格＆電気的特性
| Core Processor | ARM Cortex-M4F, 32-bit |
| Maximum Operating Frequency | 120 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Architecture | 32-bit RISC |
| Floating-Point Unit | Yes |
| USB Connectivity | Full-speed USB |
| パッケージ | 64-MAPBGA, 5 mm x 5 mm |
| 電源電圧 | 3.3 V |
| Microcontroller Family | Kinetis K22F / K22 |
| Program Memory Type | Flash |
| Analog Inputs | 40 analog inputs |
| Core Architecture | ARM Cortex-M4F with FPU |
| Product Status | Active |
| 実装タイプ | Surface mount BGA |
| Manufacturer | NXP Semiconductors |
| ピン数 | 64 balls |
MK22FN512VMP12 64-mapbga, 5 mm x 5 mm ピン配置ガイド
MK22FN512VMP12 (64-mapbga, 5 mm x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MK22FN512VMP12.
詳細は データシート をご参照ください。
主な用途
MK22FN512VMP12 の用途: 6 件s: Industrial Data Acquisition, USB-Connected Medical Equipment, Motor Control and Embedded Automation, Communications and Networked Control, USB Sensor Hub, Low-Power Embedded Products.
Industrial Data Acquisition
The MK22FN512VMP12 fits industrial data-acquisition equipment that needs a 120 MHz Cortex-M4F core, 512 KB of flash, 128 KB of SRAM, and integrated analog resources. Its 64-MAPBGA package keeps the controller footprint compact while leaving room for external sensing, signal conditioning, and communication circuitry. Use the USB connectivity for a PC-connected service interface or configure supported serial interfaces for field equipment. The application must validate analog accuracy, operating temperature, ESD protection, calibration, and factory test requirements before production.
おすすめ
USB-Connected Medical Equipment
The MK22FN512VMP12 can serve as the central controller in USB-connected medical equipment where processing throughput, program memory, and compact packaging are important. The 120 MHz Cortex-M4F core and floating-point unit support control algorithms, while 512 KB of flash accommodates firmware, USB classes, configuration data, and update logic. Full-speed USB supports a wired host or device connection, but the product still needs medical-risk assessment, electrical-safety review, isolation strategy, firmware validation, and regulatory testing before clinical use.
おすすめ
Motor Control and Embedded Automation
The ARM Cortex-M4F processor and integrated floating-point unit make the MK22FN512VMP12 appropriate for motor-oriented embedded automation, where filtering, control calculations, and real-time peripheral handling benefit from higher-performance arithmetic. Its 512 KB flash provides room for control algorithms, parameter storage, communications, and diagnostics. The 64-MAPBGA package supports dense control hardware, but designers should confirm timer, PWM, ADC, communication, and pin-mux resources against the exact datasheet. Gate-driver isolation, current sensing, protection, and thermal design remain external design requirements.
おすすめ
Communications and Networked Control
The MK22FN512VMP12 is suitable for networked control equipment requiring a compact controller with USB connectivity and substantial embedded processing capacity. Its 512 KB flash and 128 KB SRAM provide resources for protocol stacks, local storage, diagnostics, and control logic, while the Cortex-M4F core handles real-time tasks. Use supported communication peripherals and appropriate transceivers or network components rather than assuming Ethernet or wireless connectivity is integrated. The final design must review clocking, signal integrity, connector protection, and firmware timing budgets.
おすすめ
USB Sensor Hub
The MK22FN512VMP12 can manage a USB-connected sensor hub that combines multiple analog inputs with local processing. Its 40 analog inputs are identified in the verified comparison data, and the Cortex-M4F core can handle filtering, calibration, sampling coordination, and USB data transfer. The compact 64-MAPBGA footprint is useful where sensor density and board space are constrained. Engineer the analog front end separately, maintain signal integrity for high-speed USB, and verify whether each peripheral and pin is available in the exact package variant.
おすすめ
Low-Power Embedded Products
The MK22FN512VMP12 can be used in low-power embedded products where the Kinetis K22 family’s balance of processing efficiency and low-power flexibility is valuable. The 120 MHz Cortex-M4F core provides performance for foreground control, while low-power modes can reduce consumption when the product is idle or performing background tasks. Actual battery life depends on the selected operating modes, clock configuration, analog activity, USB state, and board leakage. Use the datasheet’s power-measurement conditions and validate the complete product sleep behavior rather than relying only on headline MCU specifications.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MK22FN512VMP12 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MK22FN512VLL12 | MK22FN512VDC12 | MK22FN256VMP12 | MK22FN128VMP10 |
|---|---|---|---|---|---|
| Package | 64-MAPBGA, 5 mm x 5 mm | 64-LQFP | MAPBGA, package code differs | 64-MAPBGA | 64-MAPBGA |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F | Related Kinetis K22 variant | Related Kinetis K22 variant | Related Kinetis K22 variant | Related Kinetis K22 variant |
主な差別化要因
- High-performance Cortex-M4F processing with integrated floating-point hardware （vs MK22FN256VMP12)
- Larger flash budget for USB stacks and firmware growth （vs MK22FN128VMP10)
- Compact 5 mm by 5 mm MAPBGA implementation （vs MK22FN512VLL12)
- Verified Kinetis K22 positioning for USB and processing efficiency （vs MK22FN512VDC12)
設計ノート
The MK22FN512VMP12 uses a 64-MAPBGA package measuring 5 mm by 5 mm. Before routing, verify every ball assignment, power ball, ground ball, and signal ball against the current NXP datasheet and package drawing. Use a PCB footprint and assembly process validated for the exact ball pitch and map-BGA land pattern. Because the supplied data does not include the complete pinout, do not infer pad locations from a generic BGA library. Confirm escape-routing density, via requirements, solder-mask and paste design, and component placement with the assembler.
The verified distributor information identifies the device as a 3.3 V MCU, but the supplied sources do not provide the complete operating-voltage range, current limits, or regulator sequencing requirements. Confirm the power architecture directly from the NXP datasheet, including core and I/O supplies, decoupling capacitors, analog supply requirements, USB power states, and brownout behavior. Keep high-current USB and switching paths physically separated from sensitive analog and MCU supply routing. A nominal supply label is not a substitute for the complete electrical limits.
USB operation requires careful signal-integrity layout even though the device supports full-speed USB. Follow the NXP reference layout and keep the USB data path short, continuous, impedance-controlled, and free of unnecessary vias. Provide appropriate protection, common-mode considerations, connector design, and ground-return planning. For analog measurements, keep sensitive inputs away from USB, clock, and switching-node routing, and use a grounded reference strategy that matches the selected ADC or sensor front end. Validate the final board with signal-integrity and EMC testing.
The most important migration pitfall is assuming that related Kinetis K22 part numbers are automatically drop-in replacements. Package codes such as VMP12, VLL12, and VDC12 can indicate different physical packages, while memory-density changes can alter firmware layout and resource requirements. Compare the exact NXP datasheets for package dimensions, ball or pin assignments, clock sources, peripheral availability, USB implementation, and memory map. If IRC48M or another clock source is used by existing firmware, confirm that it remains available in the proposed replacement.
コンプライアンス情報
The supplied verified sources identify the product as active but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. No compliance status should be inferred without the current NXP product documentation or supplier declaration.
