MK52DN512CMD10 - 100MHz Cortex-M4 Kinetis K50 MCU | NXP
部品番号: MK52DN512CMD10 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MK52DN512CMD10 概要
A microcontroller unit (MCU) is a complete computing system integrated on a single chip, combining a processor core, memory, and peripherals. The Kinetis K50 family sits within NXP's broader Kinetis MCU hierarchy, which is part of the wider Arm Cortex-M embedded processor ecosystem used in industrial and medical electronics. Within this taxonomy, the K50 sub-family is distinguished by its integrated analog measurement engine, positioning it as a measurement-oriented MCU rather than a general-purpose controller.
Key differentiating features include the K50 analog measurement engine, which integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules. According to NXP product information, this integration reduces external component count, cuts system cost, and increases design flexibility for precision measurement designs. The Cortex-M4 core includes DSP instructions that, per NXP, increase performance by reducing core interruption overhead.
Technically, the device operates from 1.8V, 2.5V, or 3.3V supply rails and provides USB and Ethernet connectivity. Industrial temperature grade classification is indicated by distributor Partstack data. The MAPBGA ball-grid array package offers a compact 13x13 mm footprint with 144 connection balls for high pin-count peripheral expansion.
Typical applications are medical instrumentation and industrial measurement systems, where the integrated op amps and high-resolution ADC/DAC modules directly serve sensor signal chains. USB and Ethernet interfaces support connected devices and networked diagnostics.
Design consideration: verify flash memory configuration at PCB bring-up, as NXP Kinetis devices in the 512 KB class are offered in multiple flex-memory variants; the MK52DN512CMD10 is listed by DigiKey with 512KB (512K x 8) flash.
This page synthesizes distributor availability data, family comparisons, and drop-in alternative guidance not consolidated in the manufacturer datasheet.
ドロップイン代替品: MK52DN512CMD10 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MK52DN512CMD10 （同一形状・フットプリント） — 相違点: Package, Supply Voltage, Maximum Clock Frequency, USB, ADC.
クイック比較ツール — 並列比較する代替部品を選択:
MK52DN512VMD10
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MK53DN512CMD10
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MK51DN512CMD10
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MK50DN512CMD10
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MK10DN512VMD10
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MK52DN512CMD10 最大定格＆電気的特性
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-Bit |
| 最大クロック周波数 | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| 電源電圧 | 1.8V / 2.5V / 3.3V |
| パッケージ | 144-MAPBGA (13x13) |
| Number of Terminals | 144 |
| Package Shape | Square |
| Terminal Form | Ball |
| 実装タイプ | Surface Mount |
| Temperature Grade | Industrial |
| Series | Kinetis K50 (K52 Sub-Family) |
| USB Interface | Yes |
| Ethernet Interface | Yes |
| Integrated Analog Engine | Op amps, trans-impedance amplifiers, ADC, DAC |
| Packaging | Tray |
MK52DN512CMD10 square ピン配置ガイド
MK52DN512CMD10 (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MK52DN512CMD10.
詳細は データシート をご参照ください。
主な用途
MK52DN512CMD10 の用途: 6 件s: Medical Measurement Instrumentation, Industrial Measurement and Sensing Nodes, Portable Data Acquisition Systems, Ethernet-Connected Test and Measurement Equipment, Medical Diagnostic Handhelds, Industrial Control Panels with HMI.
Medical Measurement Instrumentation
The MK52DN512CMD10 fits medical measurement equipment because NXP explicitly designed the Kinetis K50 family's analog measurement engine for medical applications: integrated operational amplifiers and trans-impedance amplifiers feed high-resolution ADC and DAC modules on a single die. In a biosignal acquisition front end, photodiode or electrode signals are amplified by the on-chip trans-impedance amplifier and digitized by the integrated ADC without external discrete amplifiers, reducing component count and noise pickup. The 100 MHz Cortex-M4 core applies DSP filtering to samples with reduced core interruption, while 128 KB SRAM buffers waveform data. USB connectivity supports data transfer to diagnostic host systems. The trade-off is that integrated op amps offer fixed gain configurations versus fully discrete designs.
おすすめ
Industrial Measurement and Sensing Nodes
The MK52DN512CMD10 suits industrial measurement nodes because its K52 sub-family integrates the op amps, trans-impedance amplifiers, ADC, and DAC needed to condition and digitize sensor signals directly on-chip. According to NXP, this analog engine increases system cost reduction and design flexibility - a weight-scale, pressure-sensing, or current-monitoring node can replace a discrete front-end with the MCU's integrated path. The industrial temperature grade (per Partstack data) matches factory-floor environments, and Ethernet connectivity enables networked sensor deployment on plant infrastructure. The 1.8V/2.5V/3.3V supply options integrate with common industrial power trees. Design consideration: verify ADC noise requirements against the datasheet's specified resolution before dropping external signal conditioning entirely.
おすすめ
Portable Data Acquisition Systems
For battery-powered data acquisition, the MK52DN512CMD10 consolidates acquisition, processing, and connectivity in one 13x13 mm 144-MAPBGA package, reducing board area versus separate analog front end plus MCU plus USB controller. The on-chip high-resolution ADC and DAC handle measurement capture and stimulus generation, while the 100 MHz Cortex-M4 executes real-time analysis. Per DigiKey, the device integrates USB, allowing direct connection to host PCs without a dedicated USB bridge IC. The 512 KB flash accommodates in-field firmware updates plus calibration tables. Trade-off: a BGA package complicates hand rework for field service, so plan for panel-level or fixture-based repair strategies in portable product maintenance programs.
おすすめ
Ethernet-Connected Test and Measurement Equipment
The MK52DN512CMD10 is appropriate for benchtop and rack-mounted test instruments because it combines 100 MHz Cortex-M4 processing with on-chip Ethernet, letting the instrument expose LXI-style network interfaces without an external MAC/PHY controller chip beyond the PHY itself. NXP notes the K50 family reduces core interruption, improving responsiveness during streaming measurement data over Ethernet. The integrated DAC generates test stimulus or calibration waveforms, while the measurement engine digitizes responses. 512 KB flash stores multiple instrument personalities or calibration sets. Layout consideration: keep the Ethernet PHY routing and analog measurement front end on separate ground regions to preserve the low-noise measurement capability that motivates choosing this K52 part.
おすすめ
Medical Diagnostic Handhelds
Handheld diagnostic devices benefit from the MK52DN512CMD10's single-chip integration: the analog measurement engine (op amps, trans-impedance amplifiers, ADC, DAC) processes sensor inputs such as optical or electrochemical probes, the Cortex-M4 core runs the measurement algorithm at 100 MHz, and USB handles charging and data export. Per NXP, the K50 analog engine was developed specifically for medical measurement applications, and on-chip integration shrinks the PCB enough for ergonomic handheld enclosures. The 1.8V core rail contributes to low power consumption for battery operation. Trade-off: the 144-ball MAPBGA requires controlled-impedance assembly, so verify your manufacturing partner supports 0.8 mm-pitch BGA reflow before committing to this footprint in a compact handheld design.
おすすめ
Industrial Control Panels with HMI
The MK52DN512CMD10 serves control panel designs that combine measurement feedback with actuation and display. The K52's integrated analog engine reads pressure, current, or level sensors via on-chip amplification and ADC conversion, while GPIO and timer peripherals drive relays and actuators. Ethernet connectivity per the DigiKey listing enables integration with supervisory SCADA systems, and the 100 MHz Cortex-M4 with DSP instructions executes control loops (PID, filtering) with reduced interruption latency per NXP. The 512 KB flash supports rich HMI firmware including localization strings. For panel designs, the tray-packaged BGA is best placed on a carrier board with standard connectors to simplify replacement during panel maintenance cycles.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MK52DN512CMD10 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MK52DN512VMD10 | MK53DN512CMD10 | MK51DN512CMD10 | MK10DN512VMD10 |
|---|---|---|---|---|---|
| Package | 144-MAPBGA (13x13) | 144-MAPBGA (13x13) - same | 144-MAPBGA (13x13) - same | 144-MAPBGA (13x13) - same | 144-MAPBGA (13x13) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Speed | ARM Cortex-M4 @ 100 MHz | ARM Cortex-M4 @ 100 MHz | ARM Cortex-M4 @ 100 MHz | ARM Cortex-M4 @ 100 MHz | ARM Cortex-M4 @ 100 MHz |
| Sub-Family | K52 (measurement MCU) | K52 (measurement MCU) | K53 (adds security/IEEE 1588) | K51 (reduced peripherals) | K10 (general purpose, no analog engine) |
| Integrated Analog Engine | Op amps + TIA + ADC + DAC | Op amps + TIA + ADC + DAC | Yes (K5x family engine) | Partial (subset) | No |
主な差別化要因
- Full integrated analog measurement engine （vs MK10DN512VMD10)
- Same footprint with expanded security features （vs MK53DN512CMD10)
- Higher peripheral completeness than K51 （vs MK51DN512CMD10)
設計ノート
The 144-MAPBGA (13x13 mm) footprint requires a fine-pitch BGA land pattern with via-in-pad or dogbone fanout. Plan escape routing for power and ground balls first, and use a solid ground plane on layer 2 for return paths. Because the part integrates op amps and trans-impedance amplifiers, keep the analog ball region's fanout short and direct to preserve the low-noise measurement engine performance that motivates selecting this K52 sub-family part.
Per datasheets.com data the device operates from 1.8V, 2.5V, and 3.3V rails. Design the power tree to provide separate, filtered supplies for the core and analog domains; place ferrite beads or RC filters between the digital 3.3V rail and the analog amplifier supply balls. Consult the manufacturer datasheet for the exact per-domain pin assignments and sequencing requirements before layout freeze, since Kinetis K-series parts require correct I/O domain powering relative to core.
Kinetis ordering codes encode family, memory, and package options - verify that MK52DN512CMD10 matches your required configuration before ordering, as similar codes (MK50/MK51/MK53) map to different peripheral sets despite the same 144-MAPBGA footprint. Additionally, the Kinetis K50 is an older family generation; while NXP lists it as Active as of 2026-10-18, check PCN notices on the NXP product page and consider qualifying the MK53 as a migration path for new designs.
コンプライアンス情報
Compliance details are listed under the Environmental Quality section of the NXP product page but were not captured in the retrieved snippets; verify on nxp.com/part/MK52DN512CMD10.
