MKL02Z32VFM4R - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP
部品番号: MKL02Z32VFM4R ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.52 | $25.20 |
| 100 | $2.18 | $218.00 |
| 500 | $1.84 | $920.00 |
| 1,000 | $1.62 | $1,620.00 |
MKL02Z32VFM4R 概要
An ARM Cortex-M0+ microcontroller (MCU) is a 32-bit reduced instruction set computing (RISC) processor core that combines Thumb-2 instruction set efficiency with an ultra-low gate count, making it the lowest-power and smallest-footprint member of the ARM Cortex-M family. Kinetis microcontrollers integrate the Cortex-M0+ core with on-chip memory, analog peripherals, and low-power peripherals, forming a complete system-on-chip (SoC) within the broader microcontroller and embedded system hierarchy.
Key features include 48 MHz maximum CPU frequency, 32 KB program Flash, 4 KB SRAM, an 8-channel 12-bit SAR ADC, one low-power UART, two SPI modules, one I2C module, a 6-bit timer/PWM module, and a real-time clock (RTC). Multiple low-power modes (Wait, Stop, VLPS, VLLS0/1/3) plus a low-power timer and low-power UART enable deep sleep currents in the microamp range, allowing years of operation from a single coin cell.
The device leverages the Cortex-M0+ architecture with single-cycle I/O access, a hardware multiplier, and the Nested Vectored Interrupt Controller (NVIC). On-chip peripherals are interconnected through a flexible peripheral bridge, and the high-efficiency Cortex-M0+ pipeline keeps dynamic power consumption well below typical 8/16-bit MCUs at equivalent throughput.
Typical applications include wearable fitness and health monitors, portable medical sensors, smart remote controls, battery-powered IoT sensor nodes, low-end consumer electronics, and electronic shelf labels (ESL). The combination of small package, low active power, and rich peripherals makes it ideal for any space-constrained, energy-harvesting or battery-operated product.
When designing with this MCU, use the exposed thermal pad as the primary ground connection and stitch multiple vias beneath it to the internal ground plane to minimize ground bounce and improve thermal performance. Decouple VDD/VREFL with a 100 nF ceramic capacitor placed within 3 mm of the supply pins.
This page synthesizes distributor pricing, same-family NXP alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single source for Kinetis KL02 selection and procurement.
ドロップイン代替品: MKL02Z32VFM4R — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL02Z32VFM4R （同一形状・フットプリント） — 相違点: Package.
クイック比較ツール — 並列比較する代替部品を選択:
MKL02Z32VFM4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MKL04Z32VFM4
✅ ドロップイン✓ 在庫あり
$1.15 / 個
データシートを見る →MKL02Z32VFM4R 最大定格＆電気的特性
| Core Architecture | ARM Cortex-M0+ |
| Core Bit Width | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Program Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Supply Voltage (VDD) | 1.71 V to 3.6 V |
| 動作温度 | -40C to +105C |
| パッケージ | 32-HVQFN (5x5 mm) with exposed pad |
| 実装タイプ | Surface Mount |
| ADC | 12-bit SAR, 8 channels |
| Communication Interfaces | 1x LPUART, 2x SPI, 1x I2C |
| Timers | 1x 6-channel TPM, 1x LPTMR, RTC |
| I/O Pins | Up to 28 GPIO |
| Low-Power Modes | Wait, Stop, VLPS, VLLS0/1/3 |
| MSLレベル | 3 |
| RoHS ステータス | Compliant |
MKL02Z32VFM4R ピン構成
| ピン 1 | PTA0 — General-purpose I/O / TPM1_CH0 / SWD_DIO |
| ピン 2 | PTA1 — General-purpose I/O / TPM1_CH1 |
| ピン 3 | PTA2 — General-purpose I/O / LPUART0_TX |
| ピン 4 | PTA3 — General-purpose I/O / LPUART0_RX |
| ピン 5 | PTA4 — General-purpose I/O / TPM0_CH1 |
| ピン 6 | VDD — Supply voltage (1.71 V to 3.6 V) |
| ピン 7 | VSS — Ground reference |
| ピン 8 | PTA5 — General-purpose I/O / TPM0_CH2 / SWD_CLK |
| ピン 9 | PTB0 — General-purpose I/O / ADC0_SE0 / TPM0_CH0 |
| ピン 10 | PTB1 — General-purpose I/O / ADC0_SE1 |
| ピン 11 | PTB2 — General-purpose I/O / ADC0_SE2 / I2C0_SCL |
| ピン 12 | PTB3 — General-purpose I/O / ADC0_SE3 / I2C0_SDA |
| ピン 13 | PTB4 — General-purpose I/O / ADC0_SE4 / SPI0_SS |
| ピン 14 | PTB5 — General-purpose I/O / ADC0_SE5 / SPI0_MISO |
| ピン 15 | PTB6 — General-purpose I/O / ADC0_SE6 / SPI0_MOSI |
| ピン 16 | PTB7 — General-purpose I/O / ADC0_SE7 / SPI0_SCK |
| ピン 17 | PTA6 — General-purpose I/O / TPM1_CH0 / EXTAL |
| ピン 18 | PTA7 — General-purpose I/O / TPM1_CH1 / XTAL |
| ピン 19 | PTA8 — General-purpose I/O / LPUART0_RX |
| ピン 20 | PTA9 — General-purpose I/O / LPUART0_TX |
| ピン 21 | PTA10 — General-purpose I/O / I2C0_SCL |
| ピン 22 | PTA11 — General-purpose I/O / I2C0_SDA |
| ピン 23 | VDDA — Analog supply voltage |
| ピン 24 | VREFH — ADC voltage reference high |
| ピン 25 | VREFL — ADC voltage reference low |
| ピン 26 | VSS — Ground reference |
| ピン 27 | PTA12 — General-purpose I/O / TPM0_CH3 |
| ピン 28 | PTA13 — General-purpose I/O / TPM1_CH2 |
| ピン 29 | RESET_b — Reset input, active low |
| ピン 30 | PTA14 — General-purpose I/O / SWD_DIO |
| ピン 31 | PTA15 — General-purpose I/O / SWD_CLK |
| ピン 32 | NC — Not connected (per datasheet, reserved pin) |
主な用途
MKL02Z32VFM4R の用途: 7 件s: Wearable Fitness and Health Monitor, Electronic Shelf Label (ESL), Battery-Powered IoT Sensor Node, Smart Remote Control, Low-End Consumer Electronics, Industrial Sensor Module, Portable Medical Sensor.
Wearable Fitness and Health Monitor
The MKL02Z32VFM4R is well-suited to wearable fitness bands and health monitors that combine an accelerometer, optical heart-rate sensor, and a small OLED display. Its Cortex-M0+ core runs sensor-fusion algorithms at 48 MHz while drawing only a few hundred microamps active, and the on-chip 12-bit ADC captures the PPG photodiode signal directly. VLLS0 deep-sleep retention current in the sub-microamp range allows the band to stay paired to a phone for months on a single CR2032 cell. Pin-compatible 32-HVQFN footprint supports both single- and multi-sensor board revisions without re-layout.
おすすめ
Electronic Shelf Label (ESL)
Electronic shelf labels demand ultra-low standby current and a small PCB footprint, both of which the MKL02Z32VFM4R delivers. The Cortex-M0+ core decodes sub-GHz wireless packets from the ESL gateway, updates the e-ink display via SPI, and returns to VLLS0 deep-sleep at sub-microamp quiescent current. The 32 KB Flash comfortably holds segmented display fonts, custom bitmaps, and the wireless protocol stack. The 32-HVQFN (5x5 mm) package fits within the constrained ESL enclosure while the integrated LPUART supports low-speed host diagnostics.
おすすめ
Battery-Powered IoT Sensor Node
The MKL02Z32VFM4R anchors wireless IoT sensor nodes that periodically wake from deep sleep, read a sensor, transmit via a sub-GHz or BLE radio, and return to sleep. Its VLPS/VLLS0 modes drop the quiescent current below 1 microamp while retaining RAM and RTC, allowing multi-year coin-cell operation. The on-chip 12-bit ADC digitizes temperature, humidity, or battery voltage directly, while the SPI bus drives external sensors or radios. The Cortex-M0+ core at 48 MHz executes radio packet handlers and encryption in a few hundred microseconds per wake cycle.
おすすめ
Smart Remote Control
Voice and IR remote controls benefit from the MKL02Z32VFM4R's low active power and compact 32-HVQFN package. The 48 MHz Cortex-M0+ handles IR protocol encoding (RC5, NEC, SIRC) and BLE pairing state machines while idle current stays below 50 microamps in Stop mode. The integrated 12-bit ADC monitors battery voltage for low-battery alerts, and the LPUART supports firmware updates from the host. The exposed thermal pad and small footprint keep the PCB slim enough for handheld consumer remote form factors.
おすすめ
Low-End Consumer Electronics
Toys, kitchen appliances, and entry-level consumer gadgets use the MKL02Z32VFM4R as a cost-optimized system controller. The 32 KB Flash stores UI state machines, button-debounce logic, and PWM profiles for motors or LEDs. The on-chip TPM module generates PWM for LED dimming or small DC motor speed control, while I2C drives a character LCD or EEPROM. The wide 1.71 V to 3.6 V supply range lets the design run directly from 2x AA alkaline cells without a boost converter, lowering the BOM cost.
おすすめ
Industrial Sensor Module
Industrial sensor modules leverage the MKL02Z32VFM4R's -40C to +105C operating range and 32-HVQFN package with exposed thermal pad. The MCU reads 4-20 mA or 0-10 V process signals through the 12-bit ADC, applies linearization in firmware, and transmits the result via isolated UART or RS-485. The VLPS mode drops standby power for loop-powered 4-20 mA transmitters, while Stop mode supports interrupt-driven wake on sensor threshold crossings. Hardware CRC and the Cortex-M0+ NVIC ensure deterministic response to safety-critical alarm events.
おすすめ
Portable Medical Sensor
Portable medical devices such as pulse oximeters and single-parameter patient monitors use the MKL02Z32VFM4R for its low-power profile and reliable ARM Cortex-M0+ toolchain. The 48 MHz core executes pulse-oximetry algorithms in real time while the 12-bit ADC digitizes the photodiode current. Sub-microamp VLLS0 retention allows the device to remain in standby for the shelf life of the battery, and the on-chip RTC maintains elapsed-time stamps between measurements. The small 32-HVQFN footprint supports miniaturized fingertip clip form factors.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL02Z32VFM4R — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL02Z32VFM4 | MKL04Z32VFM4 | MKL02Z16VFG4 |
|---|---|---|---|---|
| Package | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) - same | 32-HVQFN (5x5 mm) - same | 16-QFN - different |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Program Flash | 32 KB | 32 KB | 32 KB | 16 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 2 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| ADC Channels | 8 channels, 12-bit | 8 channels, 12-bit | 12 channels, 12-bit | 8 channels, 12-bit |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
主な差別化要因
- Lowest quiescent current in the Kinetis KL02 family （vs MKL04Z32VFM4)
- Same 32-HVQFN footprint as the KL04 family upgrade （vs MKL04Z32VFM4)
- Smaller 16-QFN variant exists but is not pin-compatible （vs MKL02Z16VFG4)
設計ノート
The 32-HVQFN package exposes a thermal pad (EPAD) that doubles as the primary ground. Solder the EPAD to a dedicated copper island on the top layer and stitch at least nine thermal vias (0.3 mm drill, 0.5 mm pad) down to the inner ground plane. This minimizes ground bounce and provides the lowest-impedance return path for high-speed I/O toggling, which is critical when the MCU drives an SPI display or radio at 8 MHz.
Place a 100 nF X7R ceramic decoupling capacitor within 3 mm of each VDD/VSS pin pair. Add a bulk 4.7 uF ceramic on the main VDD rail and a separate 100 nF cap on VDDA. Avoid routing noisy digital return currents under the VDAD/VREFH pins, as noise coupling into the analog reference degrades ADC linearity by several LSBs.
Do not leave the RESET_b pin floating. Tie it to VDD through a 10 kohm pull-up and a 100 nF capacitor to ground for a clean power-on reset. If you plan to use the SWD debug port, do not repurpose PTA14/PTA15 as GPIO without disabling the SWD lock in the MCU's option bytes, or you will brick the debug interface.
Keep the external 32.768 kHz crystal traces for PTA6/PTA7 shorter than 5 mm and surround them with a ground guard ring. Place the crystal load capacitors within 2 mm of the MCU pins. Long XTAL traces pick up switching noise from adjacent SPI or PWM traces and increase the RTC jitter beyond the +/- 20 ppm budget.
コンプライアンス情報
RoHS and REACH compliant per NXP product page. Standard MKL02 family is not AEC-Q100 qualified; use Kinetis KEA or S32K series for automotive.
