NXP Semiconductors

MKL03Z8VFG4 - 48MHz Cortex-M0+ MCU, 8KB Flash | NXP

部品番号: MKL03Z8VFG4 ✓ 生産中
1.8 V to 3.3 V Vdss 16-QFN, 3 x 3 mm Package 48 MHz Speed 8 KB Memory
MOQ: 1 |

MKL03Z8VFG4 概要

NXP Semiconductors MKL03Z8VFG4 is a 32-bit ARM Cortex-M0+ Kinetis KL03 ultra-low-power microcontroller operating at up to 48 MHz, with 8 KB of embedded Flash memory, 2 KB of SRAM, and a 16-QFN 3 x 3 mm package. The MKL03Z8VFG4 is an active part designed for compact, energy-conscious embedded systems.

A Kinetis KL03 microcontroller is an entry-level member of the Kinetis L series and provides a migration path from 8-bit architectures into 32-bit ARM Cortex-M0+ designs. Its ultra-low-power positioning makes it relevant to battery-operated sensors, small industrial controllers, and connected accessories where energy efficiency, deterministic control, and a small footprint are more important than high processing throughput or large memory capacity.

The device's headline characteristics are its 48 MHz Cortex-M0+ processing core, 8 KB Flash program memory, and 2 KB SRAM. NXP identifies the KL0x family as software and tool compatible with other Kinetis L series devices. These properties support compact firmware with peripheral control and communication functions while helping designers reuse development tools and software approaches across related Kinetis products.

At the architecture level, the Cortex-M0+ core provides a compact 32-bit instruction set suitable for deeply embedded control tasks. The combination of modest memory capacity and a maximum 48 MHz clock allows the MCU to manage sensors, digital interfaces, and simple control logic without requiring a larger system-on-chip. Exact peripheral assignments, clock-tree details, and current-consumption figures should be confirmed against the manufacturer datasheet before a PCB is released.

Typical applications include low-cost sensor nodes, compact building controls, battery-powered accessories, industrial monitoring modules, and small consumer products with an Arm Cortex-M0+ software ecosystem. The 16-QFN 3 x 3 mm package supports dense layouts, but its exposed pad and fine-pitch leads require careful land-pattern, paste, and reflow design.

When designing a board around the MKL03Z8VFG4, begin with the manufacturer's reference schematic and pin description table, connect the exposed pad to the intended ground plane, and validate the decoupling network with the required supply rails. The small package limits hand-soldering accessibility, so inspect every QFN joint and verify assembly process capability before production.

This product page combines the confirmed MKL03Z8VFG4 identity and electrical attributes with package-specific implementation guidance, practical sourcing answers, and a conservative same-family replacement assessment. It is intended to help engineers move from part selection to schematic capture, PCB layout, firmware bring-up, and production qualification with fewer avoidable integration errors.

ドロップイン代替品: MKL03Z8VFG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MKL03Z8VFG4 (同一形状・フットプリント) — 相違点: Package, Series.

NXP Semiconductors
Package: 16-QFN (3x3 mm) with exposed pad
Series: Kinetis KL02 (KL0x)
比較対象 MKL03Z8VFG4 →
NXP Semiconductors
Package: 24-QFN (4x4 mm)
Series: Kinetis KL03 (Kinetis L series, KL0x subfamily)
比較対象 MKL03Z8VFG4 →

MKL03Z8VFK4

✅ ドロップイン
NXP Semiconductors
📦 16-QFN (3x3 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 8 KB (8K x 8) Flash · 2 KB · 24-QFN (4x4 mm) · -40C to +105C

価格はお問い合わせください

データシートを見る →

MKL03Z16VFG4

✅ ドロップイン
📦 16-QFN (3x3 mm)
Flash increases from 8 KB to 16 KB, a 100% increase, while core speed and package remain matched

📋 参考代替品(カタログ未掲載)

MKL02Z16VFG4

✅ ドロップイン
NXP Semiconductors
📦 16-QFN (3x3 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB (16K x 8) · 2 KB · 3.3 V · 16-QFN (3x3 mm) with exposed pad · Surface Mount

価格はお問い合わせください

データシートを見る →

MKL03Z8VFG4 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M0+ ultra-low-power microcontroller
Product Series Kinetis KL03
Maximum CPU Frequency 48 MHz
CPU Architecture 32-bit ARM Cortex-M0+
Embedded Flash Memory 8 KB
SRAM 2 KB
動作電源電圧 1.8 V to 3.3 V
Supported Supply Rails 1.8 V, 2.5 V, and 3.3 V
パッケージ 16-QFN, 3 x 3 mm
実装タイプ Surface mount
Shipping Format Tray
Automotive Qualification AEC-Q100
ライフサイクル状態 Active
Series Software Compatibility Compatible with other Kinetis L series devices
Number of I/O Pins 16 pins

MKL03Z8VFG4 16-qfn, 3 x 3 mm ピン配置ガイド

MKL03Z8VFG4 (16-qfn, 3 x 3 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MKL03Z8VFG4 の 16-qfn, 3 x 3 mm パッケージピン配置図

詳細なピン配置データはありません: MKL03Z8VFG4.

詳細は データシート をご参照ください。

主な用途

MKL03Z8VFG4 の用途: 6 件s: Battery-Powered Sensor Nodes, Industrial Monitoring Modules, Smart Home Controls, Low-Cost Consumer Accessories, Automotive Auxiliary Control, Compact Data Acquisition Front Ends.

🧩

Battery-Powered Sensor Nodes

The MKL03Z8VFG4 fits compact sensor nodes that need 32-bit control, local data processing, and low standby overhead without the memory demand of a larger MCU. Its 48 MHz Cortex-M0+ core can service timers, digital sensors, and communication tasks, while 8 KB Flash and 2 KB SRAM provide space for compact firmware. The 16-QFN 3 x 3 mm package leaves room for the sensor, regulator, and battery in a small enclosure. Design the power budget around the MCU's active and sleep-mode currents, and include the sensor and regulator quiescent loads in the battery-life calculation.

🏭

Industrial Monitoring Modules

The MKL03Z8VFG4 is suitable for compact industrial monitoring modules that combine digital sensing with local filtering, status indication, and a serial communications link. The 48 MHz Cortex-M0+ processor provides adequate control bandwidth without consuming the resources of a higher-performance Cortex-M3 or Cortex-M4 design. An 8 KB Flash and 2 KB SRAM configuration favors small, focused firmware, while the 3 x 3 mm QFN package supports dense control boards. For deployed equipment, verify operating-temperature requirements, isolation strategy, protection network, and long-term device continuity before production release.

🏠

Smart Home Controls

The MKL03Z8VFG4 can serve as the local controller in a smart-home switch, actuator, or small sensor interface where energy efficiency and compactness are primary requirements. The Cortex-M0+ architecture supports event handling, debouncing, timer-based behavior, and low-rate communications without requiring a large application processor. Its 8 KB Flash and 2 KB SRAM are best suited to firmware with a focused feature set, and the 16-QFN package simplifies dense mixed-signal layouts when paired with separate sensing and radio circuitry. Firmware design should use the manufacturer's low-power modes and keep wireless activity outside the MCU where possible.

📱

Low-Cost Consumer Accessories

The MKL03Z8VFG4 offers an economical platform for compact accessories that perform local control, button handling, LED indication, or simple protocol management. Its 48 MHz Cortex-M0+ core provides a responsive foundation for real-time tasks, while the small 16-QFN footprint supports miniaturized boards. The 8 KB Flash limit requires disciplined code organization, so avoid embedding large libraries, extensive graphics, and verbose diagnostic logs in firmware. Select the appropriate supply rail and I/O levels carefully, and validate connector protection and ESD requirements for products intended for user-accessible environments.

🚗

Automotive Auxiliary Control

The MKL03Z8VFG4 is identified with an automotive AEC-Q100 ordering option, making it a candidate for small auxiliary control tasks where its Kinetis KL03 architecture and compact package meet program requirements. It can handle localized sensing, actuator logic, diagnostics, and communication bridging when the application does not require larger memory or more peripherals. The 8 KB Flash and 2 KB SRAM restrict firmware scope, making a structured diagnostics and boot strategy important. Automotive deployment also requires confirmation of temperature grade, qualification records, traceability, and production-change monitoring for the exact part number.

📊

Compact Data Acquisition Front Ends

The MKL03Z8VFG4 works as a compact acquisition front end when the design samples limited digital channels, timestamps events, applies basic filtering, and forwards information through a serial interface. The 48 MHz Cortex-M0+ core offers enough performance for deterministic peripheral sequencing, while the 2 KB SRAM can support carefully bounded buffering. Its 3 x 3 mm QFN package allows the controller to sit close to sensors or connectors and shorten sensitive routes. Define buffer limits and worst-case interrupt latency in firmware, and keep analog conditioning separate from the digital MCU area to simplify signal-integrity control.

What are the key specifications of MKL03Z8VFG4 that engineers should know?
The NXP MKL03Z8VFG4 is a 32-bit ARM Cortex-M0+ microcontroller with a maximum clock frequency of 48 MHz, 8 KB of Flash memory, and 2 KB of SRAM in a 16-QFN 3 x 3 mm package. According to the NXP product page and product listing, the device belongs to the Kinetis KL03 ultra-low-power family and is an active part. Its 32-bit architecture, low-power positioning, and compact package make it especially suitable for small embedded controllers, sensors, and accessories. Confirm the detailed peripheral configuration and electrical limits in the manufacturer datasheet before finalizing a design.
What is the operating voltage of MKL03Z8VFG4?
The MKL03Z8VFG4 supports 1.8 V, 2.5 V, and 3.3 V operating supply configurations. According to the NXP product listing, the device is designed around a 1.8 V to 3.3 V supply range. Select the external regulator, bulk and high-frequency decoupling capacitors, and digital I/O limits according to the specific rail used in the design. The datasheet's absolute maximum ratings and DC operating characteristics should be treated as the controlling references for voltage selection.
What is the flash and SRAM memory of MKL03Z8VFG4?
The MKL03Z8VFG4 provides 8 KB of embedded Flash program memory and 2 KB of SRAM. According to the NXP Kinetis KL03 datasheet listing, the device is a 48 MHz Cortex-M0+ microcontroller with an 8K x 8 Flash configuration. This memory footprint is suitable for compact control firmware, protocol handling, and modest data buffering. Size bootloader images, stack requirements, and application data carefully because an 8 KB program area can be restrictive for feature-heavy firmware.
Where can I download the MKL03Z8VFG4 datasheet PDF?
The official MKL03Z8VFG4 datasheet is available through the NXP product page at https://www.nxp.com/part/MKL03Z8VFG4. The manufacturer identifies the part as an active Kinetis KL03 device and provides the data-sheet and product-change information needed for engineering review. Use the manufacturer document for the authoritative pin descriptions, memory map, electrical characteristics, package drawings, and recommended application circuit. The product page is also the best starting point for current notices and lifecycle information.
Where can I find the MKL03Z8VFG4 pinout?
The MKL03Z8VFG4 pinout is documented in the NXP datasheet's package and pin-description sections for the 16-QFN 3 x 3 mm package. Use that table to map power, ground, reset, clock, programming, and I/O functions before assigning PCB nets. The exposed pad also requires the package drawing and recommended land pattern. Because the QFN has fine-pitch leads, do not infer connectivity from physical position alone; verify every pin number against the manufacturer pin table.
What can replace the MKL03Z8VFG4?
The closest identified same-family replacement is the NXP MKL03Z8VFK4, which retains the Kinetis KL03, 8 KB Flash, 2 KB SRAM, 48 MHz Cortex-M0+, and 16-QFN 3 x 3 mm configuration. Its qualification and ordering suffixes must be checked against the original automotive, temperature, and production requirements before substitution. No cross-brand pin-compatible replacement could be confirmed from the available technical material. Treat any replacement as a board-level qualification exercise involving pin mapping, firmware, qualification, and lifecycle review.
Is MKL03Z8VFG4 the same as MKL03Z8VFK4?
The MKL03Z8VFG4 and MKL03Z8VFK4 share the principal Kinetis KL03 architecture, 48 MHz Cortex-M0+ processor, 8 KB Flash memory, 2 KB SRAM, and 16-QFN 3 x 3 mm package. The manufacturer ordering suffixes can indicate different qualification, temperature, or production classifications, so they are not automatically interchangeable for every deployment. According to the comparison material, both are related KL03 devices, but the exact suffix differences must be confirmed against the NXP datasheet and product-change notices.
MKL03Z8VFG4 vs MKL03Z8VFK4 - which is better for an automotive design?
Choose the MKL03Z8VFG4 for a design that specifically requires the automotive-qualified ordering option identified in the product listing, and choose the MKL03Z8VFK4 only after confirming that its grade and temperature classification satisfy the vehicle program. Both devices use the same 16-QFN 3 x 3 mm package and Kinetis KL03 processing platform. The suffix difference therefore matters mainly to qualification, lifecycle, and procurement rather than PCB geometry. Confirm AEC-Q100 status, temperature range, and automotive qualification records for the exact orderable part.
When should I choose MKL03Z8VFG4 over another Kinetis KL03 device?
Choose the MKL03Z8VFG4 when a design needs 8 KB Flash, 2 KB SRAM, a 48 MHz ARM Cortex-M0+ core, a 16-QFN 3 x 3 mm footprint, and the automotive-oriented ordering option identified for this part. Select a larger-flash KL03 variant when firmware growth requires more program storage, or select a different suffix when its qualification and temperature class better matches the end application. The MCU choice should be based on memory, qualification, peripheral requirements, software support, and long-term availability rather than package name alone.
Is MKL03Z8VFG4 suitable for battery-powered sensor applications?
The MKL03Z8VFG4 is suitable for many battery-powered sensor applications because it is an ultra-low-power Kinetis KL03 microcontroller with a maximum frequency of 48 MHz and 2 KB SRAM. Its compact 16-QFN package also supports space-constrained products. Actual battery life depends on the selected sleep mode, active workload, sensor standby current, regulator efficiency, and the operating voltage. Use the manufacturer's current-consumption characteristics and power-mode guidance to calculate the duty-cycle budget.
How much power does the MKL03Z8VFG4 consume?
The MKL03Z8VFG4 is designed as an ultra-low-power MCU, but a single universal consumption figure would not represent its operating states. Consumption varies with CPU activity, clock frequency, supply voltage, peripherals, and sleep mode. According to the NXP product description, the device is positioned for power-conscious embedded systems. Use the datasheet's active, idle, and low-power-mode current tables with the actual firmware duty cycle. For battery calculations, include the sensor, regulator quiescent current, pull networks, and measurement self-consumption.
Where to buy MKL03Z8VFG4 online?
Use the Request a Quote form on this page to request MKL03Z8VFG4 availability, lead time, and order quantity. The form is the appropriate purchasing channel for current supply status and package quantity requirements. NXP identifies the part as active, while exact regional stock and lead time can change. Specify the required reel or tray format, target quantities, and any automotive qualification documentation needed by your production process when submitting the request.
What is the price of MKL03Z8VFG4?
Current MKL03Z8VFG4 pricing is shown through the Request a Quote form on this page. Request a quotation with the required quantity, packaging format, and shipping destination so the commercial response reflects the current order configuration. The price can vary with volume, market conditions, and component availability, so a static price figure should not be used for budgeting. Production planners should also confirm whether an unallocated order is acceptable before freezing the BOM.
What is the lead time for MKL03Z8VFG4?
Request the current lead time through the Request a Quote form on this page. NXP lists the MKL03Z8VFG4 as active, which supports ongoing sourcing, but lead time depends on order quantity, inventory position, and manufacturing conditions. Include your required delivery date and annual usage with the request. For new production, consider supply continuity across multiple planned builds rather than evaluating only the lead time of the first order.
Is MKL03Z8VFG4 in stock?
Current MKL03Z8VFG4 stock status should be confirmed through the Request a Quote form on this page. The manufacturer identifies the device as active, but that status does not guarantee immediate availability for every quantity or package format. State the required quantity and whether you need tray or reel presentation in the request. If production cannot tolerate an allocation-based schedule, request a firm delivery commitment before authorizing the BOM release.
Can a cross-brand MCU replace MKL03Z8VFG4 without a PCB redesign?
No cross-brand drop-in replacement for the MKL03Z8VFG4 could be confirmed from the available technical material. Even when a competitor offers a 16-QFN package, matching the footprint does not guarantee matching pin multiplexing, memory map, timers, serial interfaces, clocking, and software support. A true replacement must be verified against the manufacturer pin table and application requirements. The conservative approach is to retain the NXP footprint or perform a full hardware and firmware requalification before considering another vendor.

エンジニアリング参考データ: MKL03Z8VFG4 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MKL03Z8VFG4 when a compact design needs a 48 MHz ARM Cortex-M0+ core, 8 KB Flash, 2 KB SRAM, and a 16-QFN 3 x 3 mm package, particularly for an automotive-qualified application. The MKL03Z8VFK4 is the closest confirmed alternative because it preserves the same core, memory, and package; select it only after validating its qualification and temperature differences against the end-product requirement. Choose MKL03Z16VFG4 when extra program memory is more useful than minimizing flash capacity, and choose MKL02Z16VFG4 only when its KL02 feature set better matches the design. No cross-brand drop-in option is established, so a non-NXP MCU would require a new footprint, pin mapping, firmware port, and production qualification rather than a simple replacement.

代替品との比較

パラメータ この製品 MKL03Z8VFK4 MKL03Z16VFG4 MKL02Z16VFG4
Package 16-QFN (3x3 mm) 16-QFN (3x3 mm) 16-QFN (3x3 mm) 16-QFN (3x3 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Series Kinetis KL03 Kinetis KL03 Kinetis KL03 Kinetis KL02
CPU Architecture 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 8 KB 8 KB 16 KB 16 KB

主な差別化要因

  • Compact 48 MHz Cortex-M0+ control in a 3 x 3 mm package (vs MKL02Z16VFG4)
  • Lower flash footprint for focused firmware (vs MKL03Z16VFG4)
  • Closest confirmed same-memory family alternative (vs MKL03Z8VFK4)

設計ノート

Use the manufacturer package drawing and recommended land pattern for the 16-QFN 3 x 3 mm footprint. Keep the exposed-pad connection consistent with the pin-description table and reference schematic, and provide uninterrupted ground-plane coverage beneath the device where recommended. Verify solder-paste volume and the assembly process because the short QFN leads have limited visual inspection access. A cross-section or X-ray inspection is advisable for high-volume production where lead defects would be expensive to detect.

Build the supply network around the manufacturer's recommended decoupling and operating-rail configuration. Keep the local capacitor placement path short, connect the return directly into the ground plane, and separate noisy switching or radio supplies from sensitive analog areas. If the board also supports automotive or industrial temperature requirements, verify the exact ordering suffix and regulator operating range before committing the power architecture.

Do not treat the 8 KB Flash and 2 KB SRAM limits as interchangeable with larger Kinetis devices. Check the linker map, interrupt-vector budget, stack headroom, bootloader footprint, and diagnostic code size before production. Also validate all alternate-function pin assignments in the manufacturer pin table; physically matching a 16-QFN outline does not guarantee that every peripheral signal can be routed identically between suffix variants.

Assign high-speed communication lines to pins supported by the selected package and place them away from switching nodes and antenna regions. If the MCU is adjacent to sensitive analog circuitry, provide a quiet ground path and avoid routing digital return current beneath the analog signal path. Maintain controlled clock routing and keep debug or programming access unobstructed. Complete signal-integrity checks against the actual trace lengths, load capacitance, and board stack-up.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product listing identifies the MKL03Z8VFG4 as automotive AEC-Q100. Other environmental and material-compliance fields require confirmation from the manufacturer product documentation.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MKL03Z8VFG4 MKL03Z8VFG4 datasheet MKL03Z8VFG4 datasheet PDF MKL03Z8VFG4 pinout MKL03Z8VFG4 schematic MKL03Z8VFG4 equivalent MKL03Z8VFG4 replacement MKL03Z8VFG4 cross reference MKL03Z8VFG4 vs MKL03Z8VFK4 MKL03Z8VFG4 footprint MKL03Z8VFG4 price MKL03Z8VFG4 stock NXP MKL03Z8VFG4 MKL03Z8VFG4 application circuit

関連部品&用語

NXP Semiconductors MKL03Z8VFG4 MKL03Z8VFK4 MKL03Z16VFG4 MKL02Z16VFG4 Kinetis KL03 Kinetis L series ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller ultra-low-power MCU system-on-chip semiconductor 16-QFN package QFN family surface-mount package 8 KB Flash 2 KB SRAM 48 MHz 1.8 V supply 2.5 V supply 3.3 V supply AEC-Q100 automotive electronics battery-powered sensor node
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示