MKL15Z32VFM4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP
部品番号: MKL15Z32VFM4 ✓ 生産中MKL15Z32VFM4 概要
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals and communication interfaces on one integrated circuit. Within the product hierarchy, the MKL15Z32VFM4 is an ARM Cortex-M0+ microcontroller, a 32-bit embedded processor, an integrated circuit and a semiconductor. Its combination of Cortex-M0+ code efficiency, modest memory capacity and a 5 mm square package suits compact control, sensing and interface products.
The principal device parameters are a 48 MHz operating frequency, 32 KB of flash for firmware and 4 KB of SRAM for working memory. The device belongs to the Kinetis KL1 family and is identified as the KL15 sub-family by its ordering code. Its 32-pin HVQFN package supports compact board layouts, while its low-power design focus targets battery-operated and intermittently powered products that need an economical embedded-control solution.
The MKL15Z32VFM4 uses an ARM Cortex-M0+ processor core operating as a 32-bit architecture. Cortex-M0+ designs prioritize energy efficiency and a compact instruction set, making them useful for control tasks that do not require the processing capability of a higher-performance Cortex-M core. The 32 KB flash provides space for application code, configuration data and boot routines, while 4 KB of SRAM accommodates working variables, stacks and peripheral data structures.
Typical uses include low-power sensor nodes, compact industrial controls, wearable accessories, appliance interfaces and embedded measurement modules. The small HVQFN footprint can simplify placement where board area is constrained. Developers can evaluate the device with standard embedded-development practices for ARM Cortex-M processors, including an appropriate C/C++ toolchain, debugger, linker configuration, bootloader strategy and peripheral-driver support.
PCB design should preserve the manufacturer's recommended power, decoupling, clock and exposed-pad requirements. A compact package does not remove the need for careful thermal planning: sustained processor activity and nearby power conversion can heat the device and its exposed thermal pad. Firmware should also include watchdog and brownout strategies when the MCU controls safety-relevant or unattended equipment. Confirm pin multiplexing and peripheral availability against the manufacturer pin table before finalizing the PCB.
This product page combines the manufacturer's core device characteristics, a practical low-power application context, engineering design considerations and same-package replacement guidance. It is intended to help designers evaluate the MKL15Z32VFM4 for an embedded-control design while keeping package compatibility, firmware support, memory requirements and production sourcing in the same decision process.
ドロップイン代替品: MKL15Z32VFM4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL15Z32VFM4 (同一形状・フットプリント) — 相違点: Package, Flash Memory.
MKL16Z32VFM4
✅ ドロップイン価格はお問い合わせください
データシートを見る →MKL05Z32VFM4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MKL02Z32VFM4R
✅ ドロップイン価格はお問い合わせください
データシートを見る →MKL14Z32VFM4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL15Z32VFM4R
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MKL15Z32VFM4 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Architecture | 32-bit |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bit |
| SRAM | 4 KB |
| Product Family | Kinetis KL1 |
| Device Sub-Family | KL15 |
| パッケージ | 32-HVQFN, 5 mm x 5 mm |
| Terminal Count | 32 terminals |
| Package Shape | Square |
| 実装タイプ | Surface mount |
| Temperature Grade | Industrial |
MKL15Z32VFM4 square ピン配置ガイド
MKL15Z32VFM4 (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL15Z32VFM4.
詳細は データシート をご参照ください。
主な用途
MKL15Z32VFM4 の用途: 6 件s: Low-Power Sensor Nodes, Industrial Control Modules, Wearable Accessories, Smart Home Interfaces, Appliance and Metering Controls, Battery-Powered Data Loggers.
Low-Power Sensor Nodes
The MKL15Z32VFM4 fits compact sensor nodes that sample physical inputs, apply local filtering and transmit summarized measurements. Its 48 MHz ARM Cortex-M0+ core provides enough responsiveness for control and communication tasks, while 32 KB flash supports application firmware and 4 KB SRAM accommodates working data. The 32-HVQFN package measures 5 mm by 5 mm, helping reduce board area in wearable and distributed monitoring products. Designers should use the manufacturer's low-power operating modes, place the MCU close to its sensor circuitry, and verify whether the KL15 peripheral mix provides every required interface.
おすすめ
Industrial Control Modules
The MKL15Z32VFM4 can serve as the central controller in a small industrial module that monitors switches, drives indicators and manages a low-speed communications link. The 48 MHz Cortex-M0+ processor supports deterministic control tasks, and the 32 KB flash capacity is suitable for modest supervisory logic rather than a large operating system. Its industrial temperature grade supports designs requiring a wider operating environment than a typical consumer MCU. The principal design task is validating the exact KL15 pin multiplexing and available communication peripherals against the control requirements.
おすすめ
Wearable Accessories
The MKL15Z32VFM4 is appropriate for accessory controllers that combine a user interface, motion or environmental sensing, and short-range communication. Its small 5 mm square HVQFN package preserves PCB area, while the Cortex-M0+ architecture and low-power design focus align with battery-operated operation. The 32 KB flash can hold compact application logic, and 4 KB SRAM supports event buffering and protocol state. Firmware should use the manufacturer's recommended sleep and clock arrangements, while hardware design should account for RF antenna keep-out, supply-current peaks and exposed-pad heat flow.
おすすめ
Smart Home Interfaces
The MKL15Z32VFM4 can act as a local controller for a smart-home endpoint that detects a button, evaluates a sensor or bridges a simple peripheral bus. Its 48 MHz Cortex-M0+ core is appropriate for event-driven control, while 32 KB flash provides sufficient room for compact protocol handlers and device logic. The 32-terminal HVQFN package allows a relatively compact implementation but demands careful pin multiplexing and layout review. A practical design uses the manufacturer pin table to reserve power, debug, communication and exposed-pad connections before assigning peripheral functions.
おすすめ
Appliance and Metering Controls
The MKL15Z32VFM4 is suitable for appliance subassemblies and metering products that require local measurement, state management and a simple user interface. The 48 MHz processor supports responsive control logic, and the 32 KB flash can retain firmware for a bounded set of functions. The 4 KB SRAM is sufficient for small working sets but should be checked against stack requirements, buffers and communication libraries. Industrial-grade temperature classification is useful in equipment exposed to variable internal temperatures. Firmware should include watchdog recovery, safe output defaults and careful handling of sensor calibration data.
おすすめ
Battery-Powered Data Loggers
The MKL15Z32VFM4 can manage a battery-powered data logger that wakes periodically, captures sensor values and stores or transmits measurements. The low-power Kinetis KL1 positioning supports duty-cycled operation, while the 48 MHz Cortex-M0+ core can handle sampling, timestamping and local filtering between sleep intervals. Its 32 KB flash provides a compact firmware budget, and 4 KB SRAM can buffer short acquisition bursts. For long battery life, minimize active time, disable unused peripherals, select an appropriate regulator and include brownout recovery to protect operation during supply-voltage transitions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL15Z32VFM4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL16Z32VFM4 | MKL05Z32VFM4 | MKL02Z32VFM4 | MKL14Z32VFM4 | MKL15Z32VFM4R |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Product Family | Kinetis KL1, KL15 sub-family | Kinetis KL1, KL16 sub-family | Kinetis KL1, KL05 sub-family | Kinetis KL1, KL02 sub-family | Kinetis KL1, KL14 sub-family | Kinetis KL1, KL15 sub-family |
主な差別化要因
- KL15 configuration within the same Kinetis KL1 footprint (vs MKL02Z32VFM4)
- Direct ordering-form compatibility for existing MKL15 designs (vs MKL15Z32VFM4R)
- 48 MHz processing with compact memory resources (vs MKL05Z32VFM4)
設計ノート
Follow the NXP package drawing for the 32-HVQFN land pattern, exposed-pad dimensions and terminal numbering. Keep the 5 mm square device's power and decoupling connections short, provide a continuous ground reference and route sensitive signals away from switching nodes. Because the package is small, verify the manufacturer minimum creepage and clearance rules against the actual board process before releasing the footprint to manufacturing.
Use the manufacturer-recommended supply voltage and decoupling arrangement, including local bulk and high-frequency bypass capacitance at the appropriate pins. Confirm startup current, run current and sleep current in the final clock and peripheral configuration rather than relying only on the maximum 48 MHz operating point. Brownout behavior is especially important in battery products because an uncontrolled reset during a weak battery condition can corrupt stored state or leave an external load incorrectly energized.
Estimated: the device dissipation is approximately VIN times ID plus internal losses, so a 3.3 V rail at 10 mA produces about 33 mW of external power loss before internal overhead. Copper under the exposed pad and nearby ground vias should spread heat without violating the manufacturer's pad-connection requirements. Recalculate the estimate using the actual input voltage, active current, ambient temperature and PCB copper area, then verify the junction-temperature limit with the package thermal model.
Do not treat another 32-HVQFN Kinetis KL1 device as automatically interchangeable. Compare the exact peripheral list, alternate-function mappings, clock sources, debug connections, power pins and exposed-pad requirements for each replacement. Firmware may also require linker, startup, clock-configuration and driver changes when moving between KL15, KL14, KL05, KL02 and KL16 variants even when the processor and memory sizes appear equivalent.
コンプライアンス情報
The manufacturer identifies the device as active and provides environmental-quality information on its product page, but no specific RoHS, REACH, lead-free, halogen-free or conflict-minerals declaration was confirmed for this exact ordering form.