MKL26Z128VMC4 - 48MHz Cortex-M0+ 128KB USB MCU | NXP
部品番号: MKL26Z128VMC4 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.63 | $3.63 |
| 10 | $3.45 | $34.50 |
| 100 | $3.27 | $327.00 |
| 500 | $3.1 | $1,550.00 |
| 1,000 | $2.95 | $2,950.00 |
MKL26Z128VMC4 概要
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals to execute dedicated embedded control tasks. Within the power/efficiency hierarchy of embedded processors, the Kinetis KL2x family sits in the ultra-low-power MCU segment, extending the KL1x series with USB connectivity while remaining compatible with Kinetis K20 (Cortex-M4) and other KL-series devices, providing a clear migration path.
Key features include the 48 MHz Cortex-M0+ core optimized for low dynamic power, 128 KB of program flash, USB OTG plus crystal-less full-speed USB device operation, and 84 general-purpose I/O lines. Connectivity spans I2C, LINbus, SPI, UART/USART, and USB; system peripherals include DMA, I2S, PWM, brown-out detect/reset, low-voltage detect, power-on reset, and a watchdog timer.
Technically, the Cortex-M0+ architecture delivers ARM code density with a two-stage pipeline and low gate count, while the KL2x power architecture provides multiple low-power modes with fast wake-up, making it suitable for battery-powered USB peripherals. The mixed-signal integration (I2S, 12/16-bit ADC capability per family documentation) supports audio and sensor aggregation designs.
Typical applications include USB HID device peripherals, wearable and portable battery-powered products, sensor hubs, and small HMI systems. The 121-ball 8x8 mm MAPBGA keeps board area compact while exposing 84 I/Os.
Design consideration: the MAPBGA-121 footprint requires controlled-impedance fine-pitch BGA layout; plan an escape-routing layer strategy early. The USB OTG controller removes the need for an external crystal in device mode, saving BOM cost.
This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: MKL26Z128VMC4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL26Z128VMC4 （同一形状・フットプリント） — 相違点: Package, ADC, Connectivity, Series, Peripherals.
クイック比較ツール — 並列比較する代替部品を選択:
MKL26Z256VMC4
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.12 / 個
データシートを見る →MKL26Z64VMC4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MKL25Z128VMC4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MKL17Z128VMC4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MK12DX128VMC5
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MKL26Z128VMC4 最大定格＆電気的特性
| Core Processor | ARM Cortex-M0+ |
| Core Size | 32-bit |
| Maximum Clock Speed | 48 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LVD, POR, PWM, WDT |
| Number of I/O | 84 |
| パッケージ | 121-MAPBGA (8x8 mm) |
| 実装タイプ | Surface Mount |
| Series | Kinetis KL2 |
| USB Controller | Full-speed USB 2.0 OTG / crystal-less USB device |
| Part Status | Active |
MKL26Z128VMC4 121-mapbga (8x8 mm) ピン配置ガイド
MKL26Z128VMC4 (121-mapbga (8x8 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL26Z128VMC4.
詳細は データシート をご参照ください。
主な用途
MKL26Z128VMC4 の用途: 6 件s: USB HID Device Peripherals, Wearable and Portable Battery-Powered Devices, Sensor Hubs and Data Aggregation, Audio Interfaces and USB Audio Class Devices, Industrial Control and Small HMI Systems, IoT Smart Home End Nodes.
USB HID Device Peripherals
The MKL26Z128VMC4 fits USB HID products - keyboards, mice, game controllers, and custom HID data loggers - because its full-speed USB 2.0 OTG controller plus crystal-less USB device capability eliminates the external crystal, cutting BOM cost and board area. The 48 MHz Cortex-M0+ easily sustains full-speed 12 Mbps USB traffic while servicing HID report generation over DMA. The 128 KB flash accommodates USB descriptor tables, HID class stacks, and application logic with room to spare, while 84 GPIOs handle matrix scanning or discrete interfaces. Battery-powered HID peripherals benefit further from the KL2x ultra-low-power architecture with multiple sleep modes between USB resume events, extending battery life substantially versus general-purpose MCUs.
おすすめ
Wearable and Portable Battery-Powered Devices
Wearables demand maximum energy efficiency in minimal board area, and the MKL26Z128VMC4 addresses both constraints: the 121-ball MAPBGA occupies only 8x8 mm while integrating a 48 MHz Cortex-M0+ optimized for low dynamic power. NXP characterizes the Kinetis KL2x as an ultra-low-power family designed for portable applications, with low-power modes and fast wake-up that let the MCU sleep between sensor reads. The 128 KB flash stores BLE-stack-free sensor aggregation or gesture firmware comfortably, and the 12-bit ADC (per family data) samples motion and biometric sensors. Integrated I2S also supports small audio interfaces in smart rings or hearing-adjacent form factors without an external codec controller.
おすすめ
Sensor Hubs and Data Aggregation
The MKL26Z128VMC4 serves as a sensor hub aggregating I2C and SPI sensor data using its multiple serial interfaces and DMA channels, offloading the main application processor in smartphones, tablets, and IoT gateways. The 48 MHz Cortex-M0+ handles sensor fusion math with deterministic latency, while DMA moves samples without CPU intervention, keeping power draw low. Its 84 GPIOs flexibly map to interrupt lines from multiple sensors, and the ultra-low-power design allows the hub to remain active when the host processor sleeps. Flash-resident calibration tables and the brown-out/low-voltage-detect peripherals protect data integrity in portable and industrial sensing deployments alike.
おすすめ
Audio Interfaces and USB Audio Class Devices
The integrated I2S peripheral makes the MKL26Z128VMC4 a natural fit for USB audio class devices such as microphones, headset adapters, and small DAC interfaces. USB OTG provides the data pipe while I2S clocks an external codec, and the 48 MHz core supports USB audio interrupt pacing with margin. Because USB device operation can run crystal-less, audio dongle designs save the crystal and its layout sensitivity. The KL26's low-noise power architecture and deterministic M0+ execution keep jitter low, and 128 KB flash holds the USB Audio Class 1.0/2.0 descriptor sets plus DSP primitives like volume and mute handling, all in a single compact 8x8 mm BGA.
おすすめ
Industrial Control and Small HMI Systems
For industrial nodes - motor control assist, relay logic, and character/graphical HMI panels - the MKL26Z128VMC4 provides 84 GPIOs, PWM timers, UART/LIN connectivity, and a watchdog timer with brown-out protection for robust operation. The 48 MHz M0+ core drives small TFT or segmented LCD interfaces via GPIO/SPI while running control loops, and LINbus support suits automotive-adjacent industrial buses. Its industrial temperature availability (confirm grade with NXP ordering data) and ultra-low-power modes support both mains-powered and battery-backed field devices. Firmware overhead is modest, and 128 KB flash leaves headroom for communication stacks plus OTA-style update staging.
おすすめ
IoT Smart Home End Nodes
Smart home end nodes - door/window sensors, thermostats, IR controllers, and Zigbee/Thread companion boards - benefit from the MKL26Z128VMC4's balance of low sleep current, 128 KB flash for network stacks, and rich peripherals. The M0+ core at 48 MHz executes protocol code efficiently, multiple USART/SPI/I2C ports connect radios and sensors, and DMA reduces active time. USB OTG simplifies commissioning and firmware updates when the node is docked to a USB host. Brown-out detect and POR peripherals guarantee safe reset behavior on battery sag, and the compact 121-MAPBGA footprint fits coin-cell-scale PCBs typical of smart home products.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL26Z128VMC4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL26Z256VMC4 | MKL26Z64VMC4 | MKL25Z128VMC4 | MKL17Z128VMC4 | MK12DX128VMC5 |
|---|---|---|---|---|---|---|
| Package | 121-MAPBGA (8x8 mm) | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M4 32-bit |
| Core Speed | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 120 MHz |
| Flash Memory | 128 KB | 256 KB | 64 KB | 128 KB | 128 KB | 128 KB |
| Ultra-Low-Power Family | Yes (Kinetis KL2x) | Yes (Kinetis KL2x) | Yes (Kinetis KL2x) | Yes (Kinetis KL2x) | Yes (Kinetis KL1x) | No (Kinetis K12x, higher power) |
主な差別化要因
- Full-speed USB 2.0 OTG host/device support （vs MKL25Z128VMC4)
- Ultra-low-power KL2x architecture at same cost tier （vs MK12DX128VMC5)
- Flash headroom versus lowest-cost variant （vs MKL26Z64VMC4)
設計ノート
The 121-ball MAPBGA at 0.65 mm pitch (typical for the 8x8 mm Kinetis BGA) requires fanout planning before routing begins. Use via-in-pad or dog-bone escape patterns, and allocate at least one full inner layer as a ground plane for signal return and USB signal integrity. Verify the exact ball pitch and land pattern from the NXP datasheet mechanical drawing and IPC land-pattern guidance before generating your footprint. The 8x8 mm body requires reflow profiling per NXP's recommended MSL and reflow conditions.
NXP KL26 power architecture uses separate VDD and VOUT regulator balls; follow the datasheet's decoupling network exactly - typically 10 uF bulk plus 0.1 uF ceramics on each supply ball pair, placed within 2 mm of the balls. In USB device designs, ensure the 3.3 V rail can source the USB transceiver peak current during enumeration. Estimated: a full-speed USB device draw of ~10-20 mA plus core/I/O current should be budgeted against your regulator's rated output.
Do not assume USB OTG implies host-mode support on all KL2x variants - crystal-less operation applies to device mode; host mode typically requires an external clock source. Also confirm flash allocation early: if firmware plus USB stacks approach 100 KB, select the MKL26Z256VMC4 from the start, since same-footprint flash upgrades are free layout-wise but costly as mid-program BOM changes. Use NXP MCUXpresso SDK for validated USB stack integration rather than rolling your own descriptors.
コンプライアンス情報
Compliance data was not included in the retrieved web data. Verify RoHS/REACH status on the NXP product page (nxp.com/part/MKL26Z128VMC4) under Environmental Quality before procurement.
