MP7720DS-LF-Z - 20W Mono Class-D Amplifier | MPS
部品番号: MP7720DS-LF-Z ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MP7720DS-LF-Z 概要
A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to drive an output stage efficiently. The MP7720 belongs to the Class-D amplifier, audio power-amplifier, integrated audio-amplifier, and power-management semiconductor hierarchy. Its integrated MOSFET output stage allows a compact speaker-driver solution while maintaining high conversion efficiency.
The verified specifications identify a 9.5 V to 24 V supply range, 20 W output at 4 ohms, 60 dB gain-related performance, 1.5 mA quiescent current, and a -40°C to +85°C operating range. The amplifier is specified for mono audio, with Class-D topology and single-ended output. Protection and control features reduce the need for additional external circuitry in suitable speaker applications.
Typical uses include compact speaker systems, portable audio products, audio accessory designs, industrial sound equipment, USB-powered audio projects, and small consumer audio products. The 20 W rating is most relevant when the speaker impedance and supply conditions are verified against the manufacturer datasheet. Efficiency and thermal performance must be considered together because a Class-D amplifier can still dissipate meaningful heat at high output power.
Designers should place the input, supply, and output decoupling capacitors according to the manufacturer reference circuit, keep the high-current output loop compact, and provide adequate copper for thermal dissipation. The output should be checked for correct startup and shutdown sequencing to minimize audible pops. This page consolidates verified distributor data, manufacturer information, cross-reference results, and application guidance for the MP7720DS-LF-Z.
ドロップイン代替品: MP7720DS-LF-Z — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MP7720DS-LF-Z （同一形状・フットプリント） — 相違点: Channel Configuration, Lead-Free Status, Output Power, Package, Product Type.
クイック比較ツール — 並列比較する代替部品を選択:
MP7720DS-LF
✅ ドロップイン✓ 在庫あり
$0.99 / 個
データシートを見る →MP7740DN-LF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP7740DN-LF-Z
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MP7720DS-Z
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP7720DS
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP7720DS-LF-Z 最大定格＆電気的特性
| Product Type | Mono Class-D audio amplifier IC |
| Output Power | 20 W at 4 ohms |
| 電源電圧 | 9.5 V to 24 V |
| 静止電流 | 1.5 mA |
| Gain | 60 dB |
| 効率 | 93% |
| Power MOSFET Resistance | 180 mOhm |
| 出力構成 | Single-ended, mono |
| チャネル数 | 1 channel |
| パッケージ | 8-SOIC |
| 実装タイプ | Surface mount |
| 動作温度 | -40°C to +85°C |
| Protection Features | Short-circuit protection, thermal protection, depop/startup-shutdown |
| 制御機能 | Mute, standby, shutdown |
| RoHS ステータス | RoHS compliant |
| Lead-Free Status | Lead-free |
| Distributor Package Description | Reel, SMD |
| Application Category | Audio amplifiers |
MP7720DS-LF-Z reel, smd ピン配置ガイド
MP7720DS-LF-Z (reel, smd パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MP7720DS-LF-Z.
詳細は データシート をご参照ください。
主な用途
MP7720DS-LF-Z の用途: 8 件s: Compact Mono Speaker, Portable Audio Product, USB-Powered Audio Accessory, Industrial Audio Module, Consumer Audio Accessory, USB Speaker Amplifier, Powered Monitor Speaker, Audio Test and Measurement Fixture.
Compact Mono Speaker
The MP7720DS-LF-Z fits a compact mono speaker because it combines a 20 W Class-D output stage with integrated 180 mΩ MOSFETs in an 8-SOIC package. The documented 20 W rating applies to a 4-ohm load, so it is appropriate for a small speaker whose impedance and power handling match that condition. The single-ended architecture reduces the external output-stage count, while short-circuit and thermal protection support practical speaker-drive operation. The designer should still verify stability, output filtering, thermal rise, and startup behavior against the manufacturer reference circuit.
おすすめ
Portable Audio Product
For portable audio equipment, the MP7720DS-LF-Z offers a documented 93% efficiency figure and a 20 W mono capability in a compact surface-mount package. Those characteristics can reduce amplifier-stage size and improve battery utilization compared with a less efficient linear solution, although actual current draw depends on average audio power and conversion losses. The 9.5 V minimum supply means the device is not intended for very low-voltage headphone-style rails. Product engineers should model peak battery current, speaker efficiency, heat dissipation, and audible transients during enable or shutdown.
おすすめ
USB-Powered Audio Accessory
The MP7720DS-LF-Z can serve a powered mono speaker or USB audio accessory when the available supply remains within the 9.5 V to 24 V range. Its Class-D topology and integrated MOSFETs help keep the external amplifier circuit compact, while the listed protection functions support connected-speaker operation. USB power negotiation, inrush current, cable losses, and the required supply headroom must be evaluated before assuming that a USB port can deliver the full documented output condition. The application also needs verified input filtering and controls for mute, standby, and shutdown.
おすすめ
Industrial Audio Module
A small industrial audio module can use the MP7720DS-LF-Z when it needs a higher-power mono speaker drive than a conventional low-power audio amplifier provides. The -40°C to +85°C operating range and short-circuit and thermal protection features are relevant to equipment exposed to variable internal temperatures. The 8-SOIC package is surface mount, but the output and supply paths still require careful layout and copper area. Industrial systems should validate EMC, enclosure acoustics, speaker wiring, and protection recovery behavior rather than relying on consumer-audio assumptions.
おすすめ
Consumer Audio Accessory
The MP7720DS-LF-Z is suitable for a consumer audio accessory that uses one amplified mono speaker, such as a compact soundbar section, monitor speaker, or powered desktop accessory. Its single-ended 20 W Class-D output can simplify the power stage relative to a discrete MOSFET design. The verified 60 dB gain-related figure, 1.5 mA quiescent current, and depop/startup-shutdown functions are useful system-level considerations. Designers should confirm the input source amplitude, speaker impedance, mute polarity, standby behavior, and the exact pinout in the manufacturer datasheet.
おすすめ
USB Speaker Amplifier
The MP7720DS-LF-Z can be used in a higher-output USB speaker amplifier when the USB power architecture provides adequate voltage and current. Its 20 W specification is tied to a 4-ohm load and should not be interpreted as a guaranteed continuous output into every impedance. The integrated Class-D output stage reduces the number of external power components, but the output filter, supply bypass, and high-current routing remain critical. For a USB-C design, verify source-current limits, inrush behavior, cable resistance, and shutdown transients before selecting this amplifier.
おすすめ
Powered Monitor Speaker
A powered monitor speaker or compact multimedia speaker may use the MP7720DS-LF-Z for its mono channel. The documented 20 W capability is suitable for a 4-ohm speaker, while mute and standby controls can help manage power and reduce unwanted noise during system transitions. The device's Class-D operation can reduce heat relative to a comparable linear amplifier, but thermal performance still depends on PCB copper, enclosure airflow, and sustained output level. Verify the speaker crossover, analog input level, ground return, and output-filter component selection in the manufacturer reference design.
おすすめ
Audio Test and Measurement Fixture
The MP7720DS-LF-Z can be used as a compact speaker-drive element in an audio test fixture when a controlled mono Class-D output is needed. The documented 20 W, 4-ohm, 9.5 V to 24 V operating envelope provides a defined starting point for fixture design. Measurement accuracy can be affected by output filtering, speaker impedance, thermal conditions, and the selected input level, so the fixture should include calibrated measurement points. Use the manufacturer reference layout and verify EMI behavior near sensitive analog or digital test circuitry.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MP7720DS-LF-Z — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MP7720DS-LF | MP7740DN-LF | MP7740DN-LF-Z | MP7720DS-Z | MP7720DS |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems |
主な差別化要因
- Integrated 20 W mono Class-D output stage （vs MP7740DN-LF)
- Documented high efficiency （vs MP7720DS-LF)
- Protection and audio-startup integration （vs MP7720DS-Z)
設計ノート
Use the manufacturer reference layout as the starting point for the 8-SOIC amplifier. Keep the Class-D switching current loop compact, place input and supply bypassing close to the relevant pins, and preserve a low-impedance ground return. The exact component values and pin functions are not present in the verified search data, so do not infer them from a generic Class-D circuit. Verify the final PCB against the manufacturer layout and test for output stability at the intended speaker impedance.
Treat thermal design as part of the 20 W output requirement rather than an afterthought. Class-D efficiency is listed as 93%, but actual power dissipation still depends on output level, supply voltage, speaker load, switching losses, and board thermal resistance. Provide adequate copper around the power path and follow the manufacturer’s exposed-pad or package guidance where applicable. Temperature-rise measurements should be made in the final enclosure because ambient airflow and enclosure materials can materially change junction temperature.
Do not confuse the 20 W output rating with a guarantee for every speaker or supply condition. The verified value is associated with a 4-ohm load and the documented supply range is 9.5 V to 24 V. Also do not assume that mute, standby, shutdown, input, supply, ground, and output pins can be swapped with those of another 8-SOIC Class-D amplifier. Obtain the exact MP7720DS-LF-Z pinout and verify control polarity and timing before making a board revision.
コンプライアンス情報
RoHS compliance and lead-free status are stated in the verified distributor data. REACH, halogen-free status, conflict-minerals information, and automotive qualification were not provided.
