MPC8313VRAFF - 333MHz PowerPC e300c3 MPU | NXP | Networking
部品番号: MPC8313VRAFF ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $48.5 | $48.50 |
| 10 | $43.65 | $436.50 |
| 100 | $38.8 | $3,880.00 |
| 500 | $34.2 | $17,100.00 |
| 1,000 | $29.95 | $29,950.00 |
MPC8313VRAFF 概要
A PowerQUICC II Pro MPU is a PowerPC-based microprocessor optimized for embedded networking and communications. It belongs to the broader taxonomy: microprocessor (MPU) -> processor -> integrated circuit -> semiconductor. PowerQUICC II Pro derivatives integrate communication peripherals and memory controllers, reducing bill of materials in routers, gateways, and industrial control platforms.
Key features of the MPC8313VRAFF include a 333MHz core clock, 32-bit PowerPC e300c3 architecture, integrated DDR memory controller, dual 10/100/1000 Ethernet MACs, USB 2.0 host/device, local bus, PCI express, and security engines. The 516-TEPBGA package provides robust thermal dissipation suitable for industrial networking designs with sustained computational load.
The architecture combines a high-performance e300c3 core with the QUICC Engine subsystem, which offloads packet processing tasks from the core. This heterogeneous design allows line-rate handling of common networking protocols while leaving headroom for application-level processing.
Typical applications cover industrial routers, secure gateways, network attached storage (NAS), VoIP platforms, and print/imaging controllers. The part targets cost-sensitive embedded networking that still requires deterministic protocol handling.
When designing with this device, validate the DDR2 memory topology against the MPC8313 reference manual and ensure thermal management on the exposed pad. Production designs should verify current supply against the latest NXP hardware specifications document, as revisions can affect power sequencing.
This page synthesizes distributor inventory, drop-in alternative analysis, and engineering design notes not aggregated in the manufacturer hardware specification document.
ドロップイン代替品: MPC8313VRAFF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MPC8313VRAFFC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8313EVRAGD
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MPC8313CVRAFFC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8313VRAFF 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC II Pro / MPC83xx |
| Core Processor | PowerPC e300c3 |
| Number of Cores | 1 Core, 32-Bit |
| Core Speed | 333 MHz |
| Core Voltage | 0.95 V to 1.05 V |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| パッケージ | 516-TEPBGA (27x27 mm) with Exposed Pad |
| 実装タイプ | Surface Mount |
| 動作温度 | 0C to +105C (industrial grade) |
| Encryption | No (non-E variant) |
| DDR Memory Controller | DDR/DDR2 |
| Ethernet | Dual 10/100/1000 MAC |
| USB | USB 2.0 Host/Device |
| PCI | PCI Express interface |
| Process Technology | 0.09 um CMOS |
| Packaging | Tray |
| Lead-Free Status | Lead-Free (per datasheet) |
MPC8313VRAFF 516-tepbga (27x27 mm) with exposed pad ピン配置ガイド
MPC8313VRAFF (516-tepbga (27x27 mm) with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8313VRAFF.
詳細は データシート をご参照ください。
主な用途
MPC8313VRAFF の用途: 6 件s: Industrial Network Router, Secure VPN Gateway, Network Attached Storage (NAS) Controller, VoIP Platform, Industrial Print and Imaging Controller, Communication Gateway.
Industrial Network Router
The MPC8313VRAFF's PowerPC e300c3 core at 333MHz combined with the integrated QUICC Engine makes it well suited for industrial router designs. Its dual Gigabit Ethernet MACs deliver line-rate forwarding across multiple ports, while the DDR2 memory controller supports routing table storage and packet buffering in production builds. The 516-TEPBGA package provides robust thermal dissipation for fanless industrial enclosures. The non-encrypted variant is sufficient when IPsec or SSL/TLS offload is handled by an external security coprocessor.
おすすめ
Secure VPN Gateway
For VPN gateway applications requiring cryptographic acceleration, the MPC8313EVRAGD variant of the MPC8313 family integrates SEC 3.0 hardware that offloads IPsec and SSL/TLS processing. The 333MHz e300c3 core manages control-plane tasks while the encryption engine handles line-rate AES and 3DES tunnels. The 516-TEPBGA exposed pad enables fanless industrial mounting. Designers targeting the MPC8313VRAFF should verify whether the non-E variant meets security throughput requirements before substitution.
おすすめ
Network Attached Storage (NAS) Controller
The MPC8313VRAFF's combination of dual Gigabit Ethernet, PCI Express, and local bus interfaces enables its use as a NAS controller for small-to-medium business storage appliances. The DDR2 controller supports the memory footprint required for filesystem caching, while the integrated USB 2.0 provides front-panel connectivity. Production NAS designs often pair this processor with a SATA controller over PCI Express. The 333MHz clock provides adequate headroom for RAID management and SMB/CIFS protocol handling at multi-client load.
おすすめ
VoIP Platform
The MPC8313VRAFF suits VoIP platform designs with its deterministic packet processing through the QUICC Engine subsystem and dual Ethernet interfaces for WAN/LAN separation. The PowerPC e300c3 core runs the SIP/RTP control stack while the QUICC Engine handles media stream acceleration. The 516-TEPBGA package footprint is shared across multiple PowerQUICC II Pro derivatives, simplifying multi-variant SKU management. Designers should validate DSP resource availability for voice codec processing under concurrent load.
おすすめ
Industrial Print and Imaging Controller
The MPC8313VRAFF provides the computational resources required for industrial print and imaging controller boards where USB 2.0 host, PCI Express, and local bus connectivity to image sensor ASICs are required. The 333MHz core drives raster image processing while the DDR2 memory bandwidth handles frame buffer operations. Industrial print platforms benefit from the extended temperature operation of the TEPBGA package. Migration paths should consider the MPC8308 for lower power designs.
おすすめ
Communication Gateway
The MPC8313VRAFF is widely deployed in industrial communication gateways that bridge fieldbus protocols to Ethernet backbones. Its integrated QUICC Engine supports legacy serial protocols alongside the modern Ethernet interfaces. The 516-TEPBGA package footprint accommodates thermal management for sustained gateway operation in factory automation environments. Production designs should verify DDR2 memory compatibility with the controller per NXP hardware specification guidelines.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8313VRAFF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8313VRAFFC | MPC8313EVRAGD | MPC8313CVRAFFC |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) - same | 516-TEPBGA (27x27 mm) - same | 516-TEPBGA (27x27 mm) - same |
| Core Processor | PowerPC e300c3 | PowerPC e300c3 - same | PowerPC e300c3 - same | PowerPC e300c3 - same |
| Core Clock | 333 MHz | 333 MHz - same | 333 MHz - same | 333 MHz - same |
| Encryption | No | No | Yes (SEC 3.0) | No |
| Operating Temperature | 0C to +105C (industrial) | 0C to +105C - same | 0C to +105C - same | -40C to +105C (extended) |
| Pin Count | 516 balls | 516 balls - same | 516 balls - same | 516 balls - same |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
主な差別化要因
- Same 516-TEPBGA package footprint as E-variant for design reuse （vs MPC8313EVRAGD)
- Same industrial temperature range as standard variant （vs MPC8313CVRAFFC)
- Established NXP PowerQUICC II Pro platform （vs MPC8308VMAGD)
設計ノート
The 516-TEPBGA package of the MPC8313VRAFF exposes a thermal pad that must be soldered to a PCB thermal land. Use an array of thermal vias (typically 0.3 mm pitch, 0.5 mm drill) connecting the land to internal ground planes for heat spreading. At full 333MHz load with QUICC Engine active, junction temperature can approach the 105C limit if the thermal land is omitted. Follow the layout pattern in the NXP hardware specification document section on thermal management.
DDR2 memory routing must follow the NXP hardware specification document guidelines for length matching and impedance control. The DDR2 controller is sensitive to clock-to-DQS skew; target within 25 ps for reliable operation at full bus speed. Use 100 ohm differential impedance for clock pairs and 50 ohm single-ended for address/control signals. Place VTT termination resistors within 200 mils of the DDR2 device pins per JEDEC recommendations.
The MPC8313VRAFF requires three independent voltage rails: core voltage (0.95V to 1.05V), DDR I/O voltage (1.8V for DDR2), and standard I/O voltage (3.3V or 2.5V). Sequence the core voltage first, then DDR I/O, then standard I/O per the hardware specification document. Use a power management IC with monotonic startup to prevent latch-up. Decouple each voltage rail with 0.1 uF and 10 uF ceramic capacitors placed as close as possible to the respective supply balls.
The MPC8313VRAFF exposed thermal pad must not be left floating; it must be soldered to the PCB thermal land. Floating thermal pad causes severe thermal runaway under load and is a common factory rework failure. Also verify the DDR memory device is JEDEC-compliant DDR2 - the controller does not support DDR3 or LPDDR. The QUICC Engine reset configuration is loaded from external pins at POR; document these straps carefully for board bring-up.
コンプライアンス情報
Lead-Free status confirmed per datasheet. RoHS, REACH, halogen-free, and conflict minerals compliance require verification from current distributor listing as this part is obsolete and pre-dates the latest compliance documentation standards.
