MPC8323ECVRAFDC - 333MHz PowerQUICC II Pro MPU | NXP | BGA-516
部品番号: MPC8323ECVRAFDC ✓ 生産中MPC8323ECVRAFDC 概要
What is a PowerQUICC communications processor? PowerQUICC (pronounced "power-quick") is NXP/Freescale's brand name for PowerPC-based system-on-chip devices that integrate a host CPU with one or more communications engine modules (CEs) used in networking, telecom, and embedded routing equipment. Within the family hierarchy, the MPC8323E sits between the lower-end MPC8321E and higher-end MPC8349E parts, providing a cost-effective balance of CPU performance and wired/wireless communications peripherals for SOHO/SME routers, DSLAM line cards, wireless base stations, and industrial control planes.
Key differentiating features of this part include 333 MHz e300c2 core clock, hardware encryption acceleration via the SEC engine, dual 10/100/1000 Ethernet MACs, USB 2.0 host/device, PCI 2.3 interface, DDR1/DDR2 memory controller, UTOPIA-LVD interface for xDSL/ATM/PHY connectivity, and an extended operating temperature range of -40C to +105C suitable for industrial and outdoor networking deployments.
At the architecture level the MPC8323E pairs the e300c2 host CPU with a separate QUICC Engine communications controller, allowing wire-speed packet processing on dedicated hardware while the host CPU runs control-plane software (Linux, VxWorks, or MQX). DDR1/DDR2 support with ECC, hardware PCI arbitration, and integrated PHYs reduce total BOM cost for line-card and CPE designs.
Typical applications include SOHO/SMB routers, xDSL/PON integrated access devices (IADs), Wi-Fi access points with packet inspection, industrial Ethernet gateways, and printer/imagery controllers that benefit from hardware encryption acceleration. The industrial -40C to +105C grade allows deployment in outdoor enclosures.
When designing with the MPC8323ECVRAFDC, allocate a minimum 4-layer PCB with a solid ground plane under the 27x27 mm BGA-516 footprint, follow the DDR termination guidelines in the MPC8323E hardware specifications document, and ensure adequate airflow because the part can dissipate several watts under peak Ethernet traffic. Use the UTOPIA-LVD bus only with PHY devices that support the same voltage class (typically 3.3 V LVD).
This page synthesizes distributor availability, drop-in alternative candidates, and practical hardware-design notes not found in the standalone datasheet.
ドロップイン代替品: MPC8323ECVRAFDC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8323ECVRAFDC （同一形状・フットプリント） — 相違点: Core Architecture, Memory Controller, Operating Temperature, RoHS Status, Series.
MPC8323ECZQAFDC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8323EVRAFDC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8321ECVRAFDC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8313VRAFFC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8323ECVRAFDC 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC II Pro, MPC8323E family |
| Core Processor | PowerPC e300c2 |
| Number of Cores | 1 |
| Core Architecture | 32-bit RISC |
| Maximum Core Clock | 333 MHz |
| Package Type | PBGA-516, 27 x 27 mm, 1.0 mm pitch |
| 電源電圧 | 1.0 V (core) / 3.3 V (I/O) |
| 動作温度 | -40C to +105C |
| Memory Controller | DDR1 / DDR2 with ECC |
| Communications Engine | QUICC Engine (UTOPIA-LVD) |
| Ethernet | Dual 10/100/1000 MAC (GMII/RGMII) |
| PCI | PCI 2.3, 32-bit/66 MHz |
| USB | USB 2.0 host/device |
| Encryption | SEC hardware accelerator |
| RoHS ステータス | Lead-free / RoHS compliant |
| 実装タイプ | Surface Mount |
MPC8323ECVRAFDC pbga-516, 27 x 27 mm, 1.0 mm pitch ピン配置ガイド
MPC8323ECVRAFDC (pbga-516, 27 x 27 mm, 1.0 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8323ECVRAFDC.
詳細は データシート をご参照ください。
主な用途
MPC8323ECVRAFDC の用途: 6 件s: SOHO / SMB Routers, xDSL / PON Integrated Access Devices, Industrial Ethernet Gateways, Wireless Access Points / Small Cell Controllers, Printer / Image Processing Controllers, Network-Attached Storage (NAS) Controllers.
SOHO / SMB Routers
The MPC8323ECVRAFDC's 333 MHz e300c2 core combined with the QUICC Engine communications controller makes it ideal for small-office/home-office and small-to-medium-business router designs. The dual 10/100/1000 GMII/RGMII MACs deliver two Gigabit Ethernet interfaces without external PHY glue logic, while the hardware SEC engine accelerates IPsec/TLS for VPN tunnels without burdening the host CPU. DDR2 memory with ECC keeps routing tables and NAT state robust under bursty traffic, and the -40C to +105C industrial temperature grade allows deployment in outdoor enclosures or unconditioned wiring closets. UTOPIA-LVD connectivity allows the part to pair directly with xDSL/PON PHY devices, enabling a complete integrated access device (IAD) BOM on a single SoC.
おすすめ
xDSL / PON Integrated Access Devices
The UTOPIA-LVD interface on the MPC8323ECVRAFDC provides direct connectivity to xDSL and PON PHY devices, supporting ATM, PPPoA, and GPON encapsulation offload in the QUICC Engine. By keeping wire-speed packet processing in hardware, the host CPU is freed for control-plane tasks such as routing protocols, web management, and VoIP signaling. Hardware SEC acceleration enables IPsec VPNs and WPA2-Enterprise on the same SoC without an external crypto chip, lowering BOM cost. The DDR2 controller supports enough memory for full routing tables plus deep packet inspection buffers, and the -40C to +105C temperature range suits outdoor DSLAM/PON cabinet installations where cooling is passive.
おすすめ
Industrial Ethernet Gateways
The MPC8323ECVRAFDC's industrial -40C to +105C operating range, dual Gigabit Ethernet, USB 2.0 host, and PCI expansion bus make it well-suited for rugged industrial Ethernet gateways and protocol converters. Hardware SEC acceleration secures Modbus/TCP, EtherNet/IP, and PROFINET traffic, while the QUICC Engine offloads deterministic packet handling required by industrial automation networks. The DDR2 controller with ECC provides memory reliability for long-life industrial deployments, and the PCI bus allows expansion cards for fieldbus interfaces (CAN, RS-485, PROFIBUS) or additional Ethernet ports. The same SoC can run Linux with PREEMPT_RT or VxWorks for deterministic control loops.
おすすめ
Wireless Access Points / Small Cell Controllers
Wi-Fi access points and small-cell controllers benefit from the MPC8323ECVRAFDC's combination of hardware encryption, dual Gigabit Ethernet for wired backhaul, and the PCI bus for 802.11ac/ax mini-PCIe radio modules. The SEC engine accelerates WPA2/WPA3-Enterprise authentication, and the QUICC Engine handles QoS tagging, VLAN, and packet inspection at wire speed. The host CPU at 333 MHz runs the AP control plane (hostapd, CAPWAP, OpenWRT) with enough headroom for management, telemetry, and light IDS workloads. The extended temperature rating supports outdoor mesh deployments.
おすすめ
Printer / Image Processing Controllers
Multi-function printer controllers use the MPC8323ECVRAFDC's 333 MHz host CPU plus USB 2.0 device, dual Ethernet, and PCI expansion to drive the scan engine, formatter ASIC, and network interfaces simultaneously. The DDR2 controller with ECC handles large image buffers for 1200 dpi scans, while the SEC engine encrypts jobs for secure print release workflows. The QUICC Engine offloads network protocol processing (TCP/IP, SMB, IPP, LPD) so the host CPU can focus on raster image processing (RIP) and panel control. Industrial temperature rating suits production-floor MFPs.
おすすめ
Network-Attached Storage (NAS) Controllers
Entry-level SOHO/SMB NAS appliances use the MPC8323ECVRAFDC's dual Gigabit Ethernet for link aggregation or failover, USB 2.0 host for external drives, and PCI for SATA/SAS HBAs. The QUICC Engine handles TCP/IP, iSCSI, and SMB/NFS offload at wire speed, while the 333 MHz e300c2 host runs the NAS control software, RAID management, and web UI. DDR2 with ECC is essential for filesystem journaling integrity, and hardware SEC acceleration protects encrypted volumes and remote replication traffic. The industrial temperature rating supports non-datacenter deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8323ECVRAFDC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8323ECZQAFDC | MPC8323EVRAFDC | MPC8321ECVRAFDC | MPC8313VRAFFC |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | PBGA-516 (27x27 mm, 1.0 mm pitch) | PBGA-516 (27x27 mm) - same | PBGA-516 (27x27 mm) - same | PBGA-516 (27x27 mm) - same | PBGA-516 - same family |
| Core Architecture | PowerPC e300c2, 32-bit, 1 core | PowerPC e300c2 - same | PowerPC e300c2 - same | PowerPC e300c2 - same | PowerPC e300c2 - same |
| Maximum Core Clock | 333 MHz | 333 MHz | 333 MHz | 333 MHz | ~333 MHz class |
| QUICC Engine Communications Controller | Yes (UTOPIA-LVD) | Yes | Yes | Yes | Reduced peripheral set |
| SEC Hardware Encryption | Yes | Yes | Yes | Yes | No (MPC8323 base variant) |
| Memory Controller | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 |
主な差別化要因
- Extended industrial temperature grade in the same BGA-516 footprint （vs MPC8323ECZQAFDC)
- Full QUICC Engine communications controller （vs MPC8313VRAFFC)
- SEC hardware encryption accelerator （vs MPC8323 (non-E base variant))
設計ノート
Estimated: route the MPC8323ECVRAFDC on a minimum 4-layer PCB with a continuous ground plane directly beneath the 27x27 mm BGA-516 footprint. Match DDR2 address, command, and clock trace lengths within 50 mil (1.27 mm) per the MPC8323E hardware specifications document. Use 100 ohm differential impedance for GMII/RGMII pairs and 90 ohm for USB 2.0. Place 0.1 uF decoupling capacitors on every power pin within 100 mil of the via.
Estimated: under typical SOHO router workloads (1 Gbps line-rate + IPsec VPN), the MPC8323ECVRAFDC dissipates roughly 2.5-3.5 W. With a JEDEC-standard 4-layer PCB and no heatsink, junction temperature rise is approximately 25-35 C. For enclosed industrial cabinets at +70 C, attach a small 10x10 mm copper pad or heat spreader on top of the package to keep Tj below +105 C. Use the on-die thermal diode for real-time monitoring via an external ADC.
Do not mix UTOPIA-LVD signaling levels - the MPC8323ECVRAFDC's UTOPIA interface operates at 3.3 V LVD only, not 5 V TTL. Verify your chosen DSL/PON PHY supports 3.3 V LVD before schematic capture. Additionally, ensure the SYSCLK input is a clean, low-jitter source (under 50 ps cycle-to-cycle) because the QUICC Engine derives its internal timing from SYSCLK, and jitter directly degrades wire-speed packet throughput. Last, do not leave any DDR2 chip-select or clock-enable pin floating - all unused chip-selects must be pulled to a defined logic level.
コンプライアンス情報
Lead-free PBGA-516 per JEDEC J-STD-609. Industrial -40C to +105C operating temperature. Not AEC-Q100 qualified (telecom/industrial, not automotive).
