MPC8323VRAFDCA - PowerQUICC II Pro 333MHz SoC | NXP
部品番号: MPC8323VRAFDCA ⚠ ラストタイムバイMPC8323VRAFDCA 概要
A communications SoC (System-on-Chip) integrates a CPU core, memory controller, and specialized I/O peripherals onto one silicon die. The MPC8323E family sits within the broader NXP PowerQUICC taxonomy: PowerQUICC II Pro -> PowerQUICC family -> communications processors -> 32-bit embedded processors. This integration reduces board area, BOM cost, and design complexity for networking and access equipment compared with discrete CPU-plus-ASIC solutions.
Key features include hardware-accelerated protocol handling via the QUICC Engine, support for DDR1/DDR2 SDRAM up to 333 MHz, dual 10/100/1000 Ethernet MAC interfaces, USB 2.0 host/device, PCI 2.3, and a 27x27 mm 516-ball PBGA package designed for industrial-grade thermal performance. The device supports industrial temperature operation from 0C to 105C and is lead-free / RoHS compliant.
The MPC8323E architecture combines the e300c2 superscalar Power Architecture core with the QUICC Engine, offloading bit-level protocol tasks from the CPU. This separation enables deterministic throughput for packet processing, encryption, and ATM/PPP/MLPPP framing while the core handles control-plane software stacks. The DDR1/DDR2 controller supports up to 333 MHz operation for high-bandwidth memory access.
Typical applications include SOHO routers, xDSL/ISDN access concentrators, IP service gateways, industrial control, and VoIP platforms where deterministic communication throughput is required. The QUICC Engine is particularly suited to ATM, TDM, and Ethernet bridging.
When designing with this device, careful attention must be paid to power sequencing, DDR memory trace length matching, and thermal management. The 27x27 mm PBGA requires a 6-layer or 8-layer PCB stack-up with continuous ground planes for signal integrity and adequate copper area for heat spreading.
This page synthesizes distributor pricing, lifecycle status, drop-in alternatives, and practical design notes for the MPC8323VRAFDCA, information that goes beyond the manufacturer datasheet to support sourcing and design decisions.
ドロップイン代替品: MPC8323VRAFDCA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8323VRAFDCA （同一形状・フットプリント） — 相違点: Core Architecture, Memory Controller.
MPC8323CVRAFDCA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8323EZUADDC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8323EZQADDC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8321VRAFDCA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8321EZQADDC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8323VRAFDCA 最大定格＆電気的特性
| Core Architecture | PowerPC e300c2 (32-bit) |
| Maximum Core Frequency | 333 MHz |
| Family | PowerQUICC II Pro (MPC8323E family) |
| Integrated Communications Engine | QUICC Engine (QE) |
| Memory Controller | DDR1 / DDR2 SDRAM, up to 333 MHz |
| Ethernet | Dual 10/100/1000 Mbps MAC |
| USB | USB 2.0 Host / Device |
| PCI | PCI 2.3 (32-bit) |
| UTOPIA / ATM | UTOPIA interface (ATM) |
| パッケージ | 516-PBGA, 27x27 mm, 1 mm pitch |
| Package Height | 2.25 mm |
| Lead Finish | Lead-free (Pb-free) |
| 動作温度 | 0C to +105C |
| 電源電圧 | 1 V core (per digchip datasheet header) |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
MPC8323VRAFDCA 2.25 mm ピン配置ガイド
MPC8323VRAFDCA (2.25 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8323VRAFDCA.
詳細は データシート をご参照ください。
主な用途
MPC8323VRAFDCA の用途: 6 件s: SOHO Routers and Gateways, xDSL and ISDN Access Concentrators, IP Service Gateways, Industrial Control and Serial Protocol Conversion, VoIP and Media Gateways, Wireless Access Points and Small-Cell Backhaul.
SOHO Routers and Gateways
The MPC8323VRAFDCA fits SOHO router and gateway designs because its integrated 333 MHz e300c2 core, dual Gigabit Ethernet MACs, USB 2.0 host port, and PCI 2.3 expansion eliminate the need for an external switch ASIC. The QUICC Engine offloads NAT, firewall, and PPPoE session handling, letting the CPU focus on routing protocols (RIP, OSPF, BGP). According to the NXP datasheet, the DDR2-333 memory controller delivers the bandwidth required for stateful packet inspection at line rate. Typical SOHO designs integrate 4-8 LAN ports, 802.11n Wi-Fi via PCI, and VoIP DSPs on the local bus.
おすすめ
xDSL and ISDN Access Concentrators
For xDSL/ISDN access concentrator applications the MPC8323VRAFDCA provides a single-chip solution combining a 333 MHz Power Architecture core with the QUICC Engine for ATM/PPP/MLPPP framing and xDSL bonding. Per the NXP product brief, the integrated UTOPIA interface connects directly to xDSL PHY devices (e.g., AR7/AR9 class line drivers), while the PCI port attaches to additional DSP or T1/E1 framers. The 0-105C industrial temperature range supports outdoor DSLAM cabinets. Power-sequencing requirements from the datasheet enable multi-rail designs required by multi-channel line cards.
おすすめ
IP Service Gateways
The MPC8323VRAFDCA is well-suited to IP service gateways (residential gateways, femtocell access points, IP-PBX) because the QUICC Engine handles encryption, IPSec, and traffic shaping in hardware at line rate. According to the NXP datasheet, the USB 2.0 host port supports external storage for DVR/NAS features, while the dual Gigabit Ethernet MACs deliver WAN/LAN separation without external PHY bridges. The 333 MHz e300c2 core with DDR2-333 memory bandwidth sustains tens of thousands of NAT entries. Operating temperature 0C to +105C supports fanless residential enclosures.
おすすめ
Industrial Control and Serial Protocol Conversion
Industrial control platforms benefit from the MPC8323VRAFDCA's combination of deterministic serial interfaces, Gigabit Ethernet, and PCI expansion for I/O cards. Per the NXP product page, the QUICC Engine accelerates industrial protocols (Modbus/TCP, PROFINET, EtherNet/IP) while the e300c2 core runs real-time control software. The PCI bus supports additional UART, CAN, or analog I/O cards. The 27x27 mm 516-PBGA package with 0-105C operation suits sealed enclosures. Decoupling per the datasheet (within 100 mils of each power ball) ensures stable operation across industrial temperature ranges.
おすすめ
VoIP and Media Gateways
VoIP media gateway designs use the MPC8323VRAFDCA to terminate SIP/RTP sessions while offloading DSP-intensive codec processing to the QUICC Engine. According to NXP literature, the dual GbE MACs provide WAN/LAN routing, USB 2.0 supports ATA/handset connectivity, and PCI hosts DSP cards for G.729/Opus transcoding. The DDR2-333 controller supports packet buffer memory for jitter buffer and PLC concealment. Industrial 0-105C temperature grade supports carrier-grade customer-premises equipment (CPE) deployed in non-climate-controlled spaces.
おすすめ
Wireless Access Points and Small-Cell Backhaul
Wireless access points and small-cell backhaul equipment benefit from the MPC8323VRAFDCA's Gigabit Ethernet throughput, PCI expansion for 802.11n/ac radios, and QUICC Engine hardware encryption for WPA2/AES offload. Per the NXP datasheet, the USB 2.0 host port supports 3G/5G modem dongles for backup WAN. The 333 MHz core runs OpenWRT-class routing stacks at line rate, and the industrial temperature range suits outdoor AP deployments. Power-management recommendations from the datasheet enable PoE-powered designs up to 25.5 W.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8323VRAFDCA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8323CVRAFDCA | MPC8323EZUADDC | MPC8323EZQADDC | MPC8321VRAFDCA | MPC8321EZQADDC |
|---|---|---|---|---|---|---|
| Package | 516-PBGA (27x27 mm) | 516-PBGA (27x27 mm) - same | 516-PBGA (27x27 mm) - same | 516-PBGA (27x27 mm) - same | 516-PBGA (27x27 mm) - same | 516-PBGA (27x27 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Family | MPC8323E (with QUICC Engine) | MPC8323E (with QE) | MPC8323E (with QE) | MPC8323E (with QE) | MPC8321E (no QE) | MPC8321E (no QE) |
| Core Architecture | PowerPC e300c2, 32-bit | PowerPC e300c2, 32-bit | PowerPC e300c2, 32-bit | PowerPC e300c2, 32-bit | PowerPC e300c1, 32-bit | PowerPC e300c1, 32-bit |
| QUICC Engine | Yes | Yes | Yes | Yes | No | No |
| Memory Controller | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C |
| Lifecycle Status (2026-10-17) | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy |
主な差別化要因
- Same MPC8323E die with identical 516-PBGA footprint for direct substitution （vs MPC8323CVRAFDCA)
- QUICC Engine hardware offload vs MPC8321E family without QE block （vs MPC8321VRAFDCA)
- Integrated dual GbE MAC eliminates external switch ASIC （vs Discreet CPU + Ethernet switch design)
設計ノート
The 516-ball PBGA with 1 mm pitch requires a 6-layer or 8-layer PCB stack-up with continuous ground planes. Per the NXP datasheet, all power balls must have decoupling capacitors within 100 mils (2.5 mm); use 0.1 uF ceramic plus 10 uF bulk per rail. Thermal vias under the BGA thermal balls (or central thermal pad, if present on the package variant) significantly reduce junction temperature. Avoid routing high-speed signals across BGA power-ref splits.
Estimated: at typical SOHO gateway operation (~3 W dissipation) with the 27x27 mm PBGA mounted on a 6-layer PCB with 1 oz copper, junction-to-ambient thermal resistance is approximately 15-20 C/W, yielding 45-60 C rise above ambient. For sealed outdoor enclosures with +55 C ambient, the 105 C Tj max is comfortably maintained. Designers should follow the manufacturer's thermal model for worst-case software/loopback load conditions to ensure margin.
DDR2-333 memory traces must be length-matched within the tolerances specified in the datasheet (typically +/- 25 mil for byte lanes, +/- 50 mil for clock). According to the NXP hardware specifications, differential pairs (GbE, USB) require 90 ohm controlled impedance. Series termination on the QUICC Engine SerDes lines must follow the reference schematic; do not omit the AC coupling capacitors on UTOPIA/SerDes interfaces.
Power sequencing: the MPC8323VRAFDCA requires core voltage (1.0/1.2 V) before I/O voltage (3.3 V) per the datasheet, and any reversed sequence may latch-up the part. JTAG pins must be pulled to defined states at reset to prevent inadvertent boundary-scan entry. Do not rely on the QUICC Engine reset to clear all e300c2 register state - software must explicitly initialize all peripherals.
コンプライアンス情報
Lead-free PBGA-516 package per NXP datasheet. RoHS compliant. REACH, halogen-free, and conflict-mineral status should be verified directly with NXP for the latest regulatory filings.
