MPXD1010VLQ64 - 64MHz 32-bit 1MB MCU | NXP
部品番号: MPXD1010VLQ64 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $11.4692 | $11.47 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MPXD1010VLQ64 概要
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one compact component. The MPXD1010VLQ64 belongs to the embedded microcontroller hierarchy and combines deterministic control processing with substantial onboard storage. Its 1 MB flash supports firmware and application code, while 48 KB of RAM supports working data, stack space, and intermediate calculations.
The principal verified parameters are a 64 MHz maximum operating frequency, 32-bit architecture, 1 MB program memory, 48 KB RAM, 105 I/O pins, and a 144-LQFP package. The suffix VLQ64 identifies the 64 MHz configuration, while Q64 denotes the 144-pin LQFP package variant. Distributor listings identify the device as an e200z0h PX microcontroller, which is useful for software and peripheral planning when supported by the manufacturer documentation.
The 144-LQFP package provides a high pin count for systems requiring multiple external interfaces and control signals. Compared with smaller microcontroller packages, it offers more I/O capacity but requires careful PCB routing and adequate thermal consideration. The 20 mm × 20 mm package is a surface-mount gull-wing format intended for automated assembly and high-density embedded systems.
Typical applications include industrial automation controllers, communications equipment, motor and machine control, data acquisition systems, and embedded gateways. The available verified data does not specify individual peripheral functions, supply voltage, memory technology beyond the listed capacities, or detailed timing characteristics; those values should be confirmed in the NXP datasheet before final design release.
Designers should verify the exact pinout, power requirements, clock configuration, peripheral multiplexing, and programming requirements from the official NXP documentation. The 105 I/O count is a package-level resource claim, while the usable I/O count may be lower when pins are reserved for power, ground, clock, reset, debug, and other fixed functions. PCB layouts should preserve the manufacturer-recommended decoupling and exposed thermal considerations even when those values are not published in the supplied search data.
This product record combines verified distributor specifications, package information, sourcing links, and engineering-oriented selection guidance. It is intended to support initial component identification and comparison while clearly separating verified facts from parameters that still require confirmation from the manufacturer datasheet.
ドロップイン代替品: MPXD1010VLQ64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMPXD1010VLQ64 最大定格＆電気的特性
| Architecture | 32-bit |
| Processor Core | e200z0h |
| Maximum Operating Frequency | 64 MHz |
| Program Memory | 1 MB (1M × 8) flash |
| RAM | 48 KB (48K × 8) |
| Number of I/O Pins | 105 |
| パッケージ | 144-LQFP |
| Package Body Size | 20 mm × 20 mm |
| 実装タイプ | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Oscillator Type | Not specified in verified data |
MPXD1010VLQ64 20 mm × 20 mm ピン配置ガイド
MPXD1010VLQ64 (20 mm × 20 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPXD1010VLQ64.
詳細は データシート をご参照ください。
主な用途
MPXD1010VLQ64 の用途: 6 件s: Industrial Automation Controller, Communications Gateway, Real-Time Machine Control, Data Acquisition System, Motor and Power-System Control, Embedded HMI and Human-Machine Interface.
Industrial Automation Controller
The MPXD1010VLQ64 fits industrial automation controllers that need deterministic embedded processing and ample external control connectivity. Its verified 64 MHz e200z0h core provides a defined performance baseline, while 1 MB of flash can hold application firmware and 48 KB of RAM supports control state and communication buffers. The 105-I/O count and 144-LQFP package are useful when a controller connects sensors, actuators, field buses, and status indicators. Design validation must confirm power rails, clocking, peripheral functions, and the exact industrial temperature range from NXP documentation.
おすすめ
Communications Gateway
The MPXD1010VLQ64 is suitable as the control processor in a communications gateway when the design needs local real-time handling and multiple external interfaces. The 64 MHz operating rate and 48 KB RAM can support protocol processing, buffering, and supervisory logic, while the 144-LQFP package provides a large pin-count platform. Actual communications peripheral availability is not specified in the supplied data, so UART, CAN, Ethernet, or other interface support must be verified in the NXP datasheet. Firmware and signal-integrity requirements should also be confirmed before production design.
おすすめ
Real-Time Machine Control
The MPXD1010VLQ64 can serve in real-time machine-control systems where an embedded controller must combine periodic computation with numerous external signals. Its 32-bit e200z0h architecture at 64 MHz provides a clear performance point for control logic, and 1 MB flash creates room for substantial firmware. The 105 listed I/O pins may simplify connection planning for sensors, actuator drivers, and interlocks. The design must still verify interrupt latency, peripheral availability, timing requirements, and electrical limits because those values are absent from the verified web data.
おすすめ
Data Acquisition System
The MPXD1010VLQ64 is a reasonable candidate for a data-acquisition front end that must collect digital sensor states, run control calculations, and transfer results to a host. Its 64 MHz processing rate and 48 KB RAM provide resources for acquisition tasks and short-term data movement, while 1 MB flash supports embedded application code. The 105-I/O package can reduce external multiplexing when many digital channels are required. The specific converter interfaces, analog support, sampling peripherals, and timing specifications must be checked in the NXP documentation before selecting it.
おすすめ
Motor and Power-System Control
The MPXD1010VLQ64 can be evaluated for motor-control and power-system supervisory designs that require a high-pin-count embedded controller. Its 64 MHz e200z0h processor can execute control and sequencing software, and the verified 48 KB RAM can hold state and timing information. The 144-LQFP package offers many physical connections, but the available data does not confirm motor-control peripherals, PWM channels, analog channels, or safety functions. Those capabilities, along with isolation and power-conversion interfaces, must be verified before using the device in a power stage.
おすすめ
Embedded HMI and Human-Machine Interface
The MPXD1010VLQ64 can support an embedded human-machine interface controller when the system combines display-related control, keypad or touch inputs, communications, and supervisory logic. The 32-bit 64 MHz core and 1 MB flash provide a useful baseline for embedded application code, while 48 KB RAM can support short-lived UI and protocol data. The 105-I/O package may accommodate multiple digital interface signals. However, display controller support, external memory interfaces, graphics capability, and the exact usable I/O count are not specified in the supplied data and require datasheet confirmation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPXD1010VLQ64 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 144-LQFP (20 mm × 20 mm) |
| Brand | NXP Semiconductors |
| Architecture | 32-bit |
| Processor Core | e200z0h |
| Maximum Frequency | 64 MHz |
| Program Memory | 1 MB (1M × 8) flash |
| RAM | 48 KB (48K × 8) |
| Number of I/O Pins | 105 |
| Temperature Grade | Industrial |
| Unit Price | $11.4692 as of 2026-10-21 |
主な差別化要因
- Verified processing and memory capacity （vs MPXD1005VLQ64)
- High verified I/O resource count （vs SPC5606SF2VLQ6)
- Explicit industrial-grade classification （vs MPXD1010VLQ80)
設計ノート
The MPXD1010VLQ64 uses a 144-LQFP 20 mm × 20 mm gull-wing package with 105 listed I/O pins. Route power, ground, clock, reset, debug, and high-speed signals according to the NXP reference layout and keep decoupling paths short. Because the supplied data does not specify pin names or exact power pins, do not assign signals from the I/O count alone; import the manufacturer-verified CAD symbol and pinout before release.
Supply voltage, core current, I/O current, and power-consumption limits are not included in the verified data. Before schematic capture, confirm the complete power architecture from the NXP datasheet, including required rails, sequencing, decoupling capacitance, and I/O voltage domains. The verified 64 MHz speed and 105-I/O package do not by themselves determine current draw, so validate thermal and power-supply capacity with the actual clock and I/O loading.
Use the manufacturer’s recommended footprint and pin assignment for the 144-LQFP package rather than relying on package dimensions alone. Preserve a continuous return path for each supply domain, place bulk and local decoupling at the appropriate device pins, and keep sensitive clock and reset nets away from noisy switching nodes. The supplied data does not identify differential pairs, high-speed interfaces, or analog pins, so those nets require separate review against the exact datasheet.
Do not treat the 105-I/O catalog value as the number of freely usable GPIO lines; package pins may be assigned to power, ground, clock, reset, debug, or other dedicated functions. Also do not assume that a functionally similar MCU is pin-compatible. Verify the exact orderable MPN, package, pinout, memory organization, clock requirements, peripheral mapping, and software toolchain before committing a design or substitute.
コンプライアンス情報
The supplied distributor data identifies an industrial temperature grade but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than assumed.