MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP
部品番号: MPXS2005VLQ80 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.0648 | $14.06 |
| 10 | $14.0648 | $140.65 |
| 100 | $14.0648 | $1,406.48 |
| 500 | $14.0648 | $7,032.40 |
| 1,000 | $14.0648 | $14,064.80 |
MPXS2005VLQ80 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The MPXS2005VLQ80 belongs to the e200 family and uses the e200z4d core designation shown in the distributor records. The 80 MHz operating frequency provides the timing basis for control loops, protocol handling, and supervisory tasks, while the 512 KB flash capacity supports embedded application code and firmware.
The available specification set confirms an e200z4d PX microcontroller, 32-bit architecture, 80 MHz operation, 512 KB organized as 512K x 8 flash, and a 144-LQFP package measuring 20 x 20 mm. The retrieved listings also identify the component as supporting 3.3 V and 5 V operation and as an automotive-temperature-grade device. Detailed electrical limits, peripheral inventories, memory maps, and timing characteristics were not included in the supplied evidence and therefore remain unstated here.
The 144-pin LQFP footprint provides a substantial number of external connections for digital I/O and controller peripherals. LQFP, or Low-profile Quad Flat Package, is a surface-mount package family with gull-wing leads on all four sides. The package is larger than many compact embedded packages, but it provides a practical combination of pin access and board-space efficiency for designs requiring numerous external signals.
Typical design uses include automotive body or chassis control modules, industrial automation controllers, communication gateways, sensor aggregation units, and embedded motor-control systems. The supplied evidence specifically supports automotive-temperature classification, while the broader application examples are application-fit descriptions rather than claims of manufacturer-listed designs.
Designers should verify the complete electrical, timing, peripheral, and pin-level requirements against the official datasheet before schematic capture or PCB release. Because the verified data does not provide a manufacturer PDF URL, a complete pinout, maximum supply voltage, current consumption, or thermal limits, those items must not be inferred from the distributor summaries.
ドロップイン代替品: MPXS2005VLQ80 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMPXS2005VLQ80 最大定格＆電気的特性
| Device Type | 32-bit e200z4d PX microcontroller |
| Architecture | 32-bit |
| Core Designation | e200z4d |
| Operating Frequency | 80 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| 電源電圧 | 3.3 V and 5 V |
| パッケージ | 144-LQFP |
| Package Size | 20 x 20 mm |
| Terminal Count | 144 |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
| Temperature Grade | Automotive |
| 実装タイプ | Surface mount |
| Manufacturer | NXP Semiconductors |
MPXS2005VLQ80 lfqfp ピン配置ガイド
MPXS2005VLQ80 (lfqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPXS2005VLQ80.
詳細は データシート をご参照ください。
主な用途
MPXS2005VLQ80 の用途: 6 件s: Automotive Body Control Module, Industrial Automation Controller, Communication Gateway, Sensor Aggregation Unit, Embedded Motor-Control Platform, Embedded Communication and Data Logger.
Automotive Body Control Module
MPXS2005VLQ80 fits an automotive body-control role when the design needs a 32-bit e200z4d processor, 80 MHz operation, and 512 KB of embedded flash for coordinating switches, lamps, locks, sensors, and diagnostic logic. Its verified automotive temperature classification makes it a reasonable starting point for temperature-controlled in-vehicle electronics. The 144-LQFP footprint provides many external connections for input sensing and actuator outputs, although the designer must confirm the exact peripheral functions and pin assignments in the official datasheet before allocating board space.
おすすめ
Industrial Automation Controller
The 32-bit 80 MHz core and 512 KB flash capacity make MPXS2005VLQ80 suitable for an industrial automation controller that must sequence I/O, process sensor inputs, and execute communication tasks. Its 144-LQFP package exposes a large number of connections compared with small lead-frame packages, which can simplify access to digital I/O and external interfaces in a control board. The verified data does not enumerate the device's peripherals, so motor-drive, isolated communications, and safety functions require detailed pin and electrical validation before design approval.
おすすめ
Communication Gateway
MPXS2005VLQ80 can be evaluated for a communication gateway where a 32-bit core runs at 80 MHz and 512 KB of flash stores protocol stacks, configuration data, and supervisory firmware. The large 144-LQFP package may be useful when the gateway needs numerous UART, SPI, CAN, Ethernet, or digital-control connections, but those interfaces are not confirmed in the supplied evidence and must be checked directly. Validate clock tolerance, peripheral routing, pin multiplexing, and software drivers before selecting the device for a production gateway.
おすすめ
Sensor Aggregation Unit
A sensor aggregation unit benefits from the MPXS2005VLQ80's 32-bit processing capability and 80 MHz clock when combining measurements from multiple digital sensors and applying filtering or calibration. The 512 KB flash capacity can hold application code and configuration tables, while the 144-pin package offers a high pin budget for external sensor and alarm connections. Since the verified specification does not identify ADC resolution, timer resources, or communication peripherals, the design must confirm those functions and their electrical limits in the manufacturer documentation.
おすすめ
Embedded Motor-Control Platform
MPXS2005VLQ80 may be considered for an embedded motor-control platform where real-time sequencing, extensive digital I/O, and 512 KB of firmware storage are important. The 80 MHz e200z4d core provides a defined processing platform, and the 144-LQFP package can simplify access to multiple gate-drive or feedback signals compared with a small package. However, the supplied data does not verify PWM channels, analog interfaces, timing guarantees, or isolation requirements, so motor-loop performance and safety must be proven with the complete datasheet and application-specific testing.
おすすめ
Embedded Communication and Data Logger
The MPXS2005VLQ80 can serve as the control processor in an industrial data logger or diagnostic recorder that combines sensor inputs with local storage and communications. Its 32-bit architecture and 80 MHz frequency provide capacity for protocol handling and control logic, while 512 KB of flash can hold firmware when an external nonvolatile memory option is available for larger logs. The package and supply-voltage information are verified, but storage interfaces, RAM, real-time clock, and communication blocks must be confirmed before selecting the MCU for a logging design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPXS2005VLQ80 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 144-LQFP, 20 x 20 mm |
| Brand | NXP Semiconductors |
| Architecture | 32-bit |
| Core | e200z4d |
| Operating Frequency | 80 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Supply Voltage | 3.3 V and 5 V |
| Temperature Grade | Automotive |
主な差別化要因
- Verified 80 MHz e200z4d processing platform （vs No verified same-package alternative was found)
- 512 KB flash organization （vs No verified same-package alternative was found)
- 144-LQFP integration （vs No verified same-package alternative was found)
設計ノート
Treat the 144-LQFP as a high-pin-count surface-mount footprint and verify every terminal against the official package drawing before routing. The verified data confirms the 20 x 20 mm package and gull-wing terminal form, but it does not provide pin names or power assignments. Do not infer the pinout from distributor snippets. Check land pattern dimensions, pin numbering direction, courtyard clearance, and assembly tolerances against the manufacturer drawing before releasing Gerber files.
Design the supply network for the confirmed 3.3 V and 5 V operating options, but obtain the complete absolute-maximum and current-consumption tables before selecting regulators or decoupling values. Separate noisy switching returns from sensitive signal returns where the pin architecture permits, and follow the manufacturer’s recommended capacitor values and placement. Any capacitor-sizing or current-consumption calculation performed from this listing alone is an estimate and must be checked against the datasheet.
Plan the board around the 144-pin package rather than assuming that a lower-pin-count controller can replace it. Leave adequate routing channels for power, ground, clocks, communication interfaces, and debugging signals. Because the supplied records do not identify the complete peripheral set or pin multiplexing, preserve optional routing and test points until the datasheet confirms signal assignments. Review high-speed and sensitive analog nets with the manufacturer’s recommended layout guidance.
コンプライアンス情報
The supplied distributor data identifies an automotive temperature grade but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals documentation. No compliance claim should be inferred from the temperature-grade description.
